CPU2006 license: | 3175 | Test date: | May-2016 |
---|---|---|---|
Test sponsor: | Huawei | Hardware Availability: | Mar-2016 |
Tested by: | Huawei | Software Availability: | Mar-2016 |
SPEC has determined that this result is not in compliance with the SPEC
CPU2006 run and reporting rules. Specifically, the memory was not
available as required by SPEC CPU rule 1.3.2 and the SPEC
Open Systems Group policy on general availability.
Hardware | |
---|---|
CPU Name: | Intel Xeon E5-2620 v4 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.00 GHz |
CPU MHz: | 2100 |
FPU: | Integrated |
CPU(s) enabled: | 16 cores, 2 chips, 8 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 20 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 256 GB (16 x 16 GB 2Rx4 PC4-2400T-R, running at 2133 MHz) |
Disk Subsystem: | 1 x 1000 GB SATA, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 7.2 (Maipo) 3.10.0-327.el7.x86_64 |
Compiler: | C/C++: Version 16.0.0.101 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V10.2 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
401.bzip2 | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
403.gcc | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
429.mcf | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
445.gobmk | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
456.hmmer | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
458.sjeng | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
462.libquantum | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
464.h264ref | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
471.omnetpp | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
473.astar | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
483.xalancbmk | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC | NC |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited"
BIOS configuration: Set Power Efficiency Mode to Peformance Set Snoop Mode to ES mode Set Patrol Scrub to Disable Set Hyper-Threading to enabled Sysinfo program /spec16/config/sysinfo.rev6914 $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 running on localhost.localdomain Sat May 21 07:43:49 2016 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/cpu2006/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz 2 "physical id"s (chips) 32 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 8 siblings : 16 physical 0: cores 0 1 2 3 4 5 6 7 physical 1: cores 0 1 2 3 4 5 6 7 cache size : 20480 KB From /proc/meminfo MemTotal: 263568000 kB HugePages_Total: 0 Hugepagesize: 2048 kB From /etc/*release* /etc/*version* os-release: NAME="Red Hat Enterprise Linux Server" VERSION="7.2 (Maipo)" ID="rhel" ID_LIKE="fedora" VERSION_ID="7.2" PRETTY_NAME="Red Hat Enterprise Linux Server 7.2 (Maipo)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:redhat:enterprise_linux:7.2:GA:server" redhat-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) system-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) system-release-cpe: cpe:/o:redhat:enterprise_linux:7.2:ga:server uname -a: Linux localhost.localdomain 3.10.0-327.el7.x86_64 #1 SMP Thu Oct 29 17:29:29 EDT 2015 x86_64 x86_64 x86_64 GNU/Linux run-level 3 May 21 07:37 SPEC is set to: /spec16 Filesystem Type Size Used Avail Use% Mounted on /dev/sda2 ext4 850G 98G 710G 13% / Additional information from dmidecode: Warning: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. BIOS Insyde Corp. 3.09 02/22/2016 Memory: 8x Samsung M393A2G40EB1-CRC 16 GB 1 rank 2400 MHz, configured at 2133 MHz 8x Samsung M393A2G40EB1-CRC 16 GB 2 rank 2400 MHz, configured at 2133 MHz (End of data from sysinfo program)
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/spec16/libs/32:/spec16/libs/64:/spec16/sh" Binaries compiled on a system with 1x Intel Core i5-4670K CPU + 32GB memory using RedHat EL 7.1 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/transparent_hugepage/enabled Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc>
icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin |
icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin |
400.perlbench: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LINUX_IA32 |
401.bzip2: | -D_FILE_OFFSET_BITS=64 |
403.gcc: | -D_FILE_OFFSET_BITS=64 |
429.mcf: | -D_FILE_OFFSET_BITS=64 |
445.gobmk: | -D_FILE_OFFSET_BITS=64 |
456.hmmer: | -D_FILE_OFFSET_BITS=64 |
458.sjeng: | -D_FILE_OFFSET_BITS=64 |
462.libquantum: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LINUX |
464.h264ref: | -D_FILE_OFFSET_BITS=64 |
471.omnetpp: | -D_FILE_OFFSET_BITS=64 |
473.astar: | -D_FILE_OFFSET_BITS=64 |
483.xalancbmk: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LINUX |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/sh -lsmartheap |
icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin |
400.perlbench: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LP64 |
403.gcc: | -D_FILE_OFFSET_BITS=64 |
429.mcf: | -D_FILE_OFFSET_BITS=64 |
445.gobmk: | -D_FILE_OFFSET_BITS=64 |
456.hmmer: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LP64 |
458.sjeng: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LP64 |
462.libquantum: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LINUX |
464.h264ref: | -D_FILE_OFFSET_BITS=64 |
471.omnetpp: | -D_FILE_OFFSET_BITS=64 |
473.astar: | -D_FILE_OFFSET_BITS=64 |
483.xalancbmk: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LINUX |
471.omnetpp: | -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/sh -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |