# Invocation command line: # /cpu2006/bin/runspec --define default-platform-flags -c cpu2006-1.2-ic16.0-lin64-avx2-speed-20150812.cfg --define cores=16 --define THP_enabled -T all -o all --define intspeed int # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 16.0 # Operating system version: 64-Bit RedHat Enterprise Linux64 7.1 # Hardware: Intel processors supporting AVX2 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # 20150812 Intel Compiler 16.0 for Linux64 ############################################################################ action = validate tune = base,peak # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20150812 ext = cpu2006-1.2-ic16.0-lin64-avx2-speed-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # PATHSEP = / check_md5=1 reportable=1 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6914 use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2006/flags/HP-Platform-Flags-Intel-V1.2-HSW-revE.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh preENV_OMP_NUM_THREADS = %{cores} %ifdef %{intspeed} preENV_KMP_AFFINITY = granularity=fine,compact %else preENV_KMP_AFFINITY = granularity=fine,compact %endif # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = /sh SMARTHEAP64_DIR = /sh fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xCORE-AVX2 FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ ################################################################ # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language ################################################################ 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -auto-p32 fp=base=default=default: FOPTIMIZE= $(FAST) -parallel -opt-prefetch COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias CXXOPTIMIZE= $(FAST) -opt-prefetch -ansi-alias ################################################################ # Peak Tuning Flags int 2005 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench,401.bzip2,429.mcf,445.gobmk,458.sjeng,464.h264ref,471.omnetpp,473.astar,483.xalancbmk=peak: submit = taskset -c $SPECCOPYNUM $command 400.perlbench=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin PORTABILITY= -D_FILE_OFFSET_BITS=64 CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -opt-prefetch -ansi-alias 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -opt-prefetch -no-prec-div -ansi-alias 403.gcc=peak=default: COPTIMIZE= $(FASTNOSTATIC) -inline-calloc -opt-malloc-options=3 -auto-ilp32 feedback=0 429.mcf=peak=default: COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32 feedback=0 submit = taskset -c $SPECCOPYNUM $command 445.gobmk=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin PORTABILITY= -D_FILE_OFFSET_BITS=64 COPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: basepeak=yes 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: basepeak=yes 471.omnetpp=peak=default: CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= -opt-ra-region-strategy=block -ansi-alias 473.astar=peak=default: CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -auto-p32 feedback=0 submit = taskset -c $SPECCOPYNUM $command 483.xalancbmk=peak=default: CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -ansi-alias feedback=no ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -auto-ilp32 -ansi-alias PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_FFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: basepeak=yes 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: OPTIMIZE= $(FASTNOSTATIC) feedback=0 459.GemsFDTD=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -opt-prefetch -parallel 465.tonto=peak=default: OPTIMIZE= -inline-calloc -opt-malloc-options=3 -auto -unroll4 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 3 test_sponsor = HPE hw_avail = Mar-2016 sw_avail = Nov-2015 tester = HPE hw_cpu_name = Intel Xeon E5-2620 v4 hw_cpu_char = Intel Turbo Boost Technology up to 3.00 GHz hw_cpu_mhz = 2100 hw_disk = 2 x 400 GB SAS SSD, RAID 1 hw_fpu = Integrated hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2400T-R, hw_model000 = ProLiant XL420 Gen9 hw_model001 = (2.10 GHz, Intel Xeon E5-2620 v4) hw_ncpuorder = 1,2 chips hw_ncores = 16 hw_nchips = 2 hw_ncoresperchip = 8 hw_nthreadspercore = 1 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None hw_vendor = Hewlett Packard Enterprise prepared_by = HPE Performance Engineering sw_file = ReiserFS sw_os001 = RedHat EL 6.4 sw_state = Run level 3 (multi-user) notes_025 = Binaries compiled on a system with 1x Intel Core i5-4670K CPU + 32GB notes_030 = memory using RedHat EL 7.1 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_os_005 = Transparent Huge Pages enabled with: notes_os_010 = echo always > /sys/kernel/mm/transparent_hugepage/enabled notes_plat_000 = BIOS Configuration: notes_plat_005 = Intel Hyperthreading set to Disabled #notes_plat_010 = Power Profile set to Maximum Performance notes_plat_010 = Power Profile set to Custom notes_plat_015 = Power Regulator set to Static High Performance Mode notes_plat_020 = Minimum Processor Idle Power Core C-State set to C6 State notes_plat_030 = Minimu Processor Idle Power Package C-State set to C6 (retention) Package State notes_plat_025 = Energy/Performance Bias set to Balanced Performance notes_plat_035 = QPI Snoop Configuration set to Home Snoop notes_plat_040 = Collaborative Power Control set to Disabled notes_plat_045 = Thermal Configuration set to Maximum Cooling notes_plat_050 = Processor Power and Utilization Monitoring set to Disabled notes_plat_055 = Memory Double Refresh Rate set to 1x Refresh notes_plat_060 = Memory Patrol Scrubbing set to Disabled notes_plat_065 = int=default=default=default: sw_compiler000 = C/C++: Version 16.0.0.101 of Intel C++ sw_compiler001 = Studio XE for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other = Microquill SmartHeap V10.2 default: %ifdef %{THP_enabled} %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler001 = C/C++: Version 16.0.0.101 of Intel C++ Studio XE sw_compiler002 = for Linux; sw_compiler004 = Fortran: Version 16.0.0.101 of Intel Fortran sw_compiler005 = Studio XE for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6914' default: notes_plat_sysinfo_000 = Sysinfo program /cpu2006/config/sysinfo.rev6914 notes_plat_sysinfo_005 = $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 notes_plat_sysinfo_010 = running on mvb-xl420-g9 Sun May 22 18:01:37 2016 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 16 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 8 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_095 = cache size : 20480 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 263712768 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = From /etc/*release* /etc/*version* notes_plat_sysinfo_135 = os-release: notes_plat_sysinfo_140 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_145 = VERSION="7.2 (Maipo)" notes_plat_sysinfo_150 = ID="rhel" notes_plat_sysinfo_155 = ID_LIKE="fedora" notes_plat_sysinfo_160 = VERSION_ID="7.2" notes_plat_sysinfo_165 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.2 (Maipo)" notes_plat_sysinfo_170 = ANSI_COLOR="0;31" notes_plat_sysinfo_175 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.2:GA:server" notes_plat_sysinfo_180 = redhat-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) notes_plat_sysinfo_185 = system-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) notes_plat_sysinfo_190 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.2:ga:server notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = uname -a: notes_plat_sysinfo_205 = Linux mvb-xl420-g9 3.10.0-327.el7.x86_64 #1 SMP Thu Oct 29 17:29:29 EDT 2015 notes_plat_sysinfo_210 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = run-level 3 May 22 17:57 notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = SPEC is set to: /cpu2006 notes_plat_sysinfo_235 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_240 = /dev/sda4 xfs 364G 21G 344G 6% / notes_plat_sysinfo_245 = Additional information from dmidecode: notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_260 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_265 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_270 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = BIOS HP U19 03/10/2016 notes_plat_sysinfo_285 = Memory: notes_plat_sysinfo_290 = 16x UNKNOWN NOT AVAILABLE 16 GB 2 rank 2400 MHz, configured at 2133 MHz notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2620 v4 hw_disk = 2 x 400 GB SAS SSD, RAID 1 hw_memory001 = running at 2133 MHz) hw_nchips = 2 prepared_by = HPE Performance Engineering sw_file = xfs sw_os000 = Red Hat Enterprise Linux Server release 7.2 sw_os001 = (Maipo), sw_os002 = Kernel 3.10.0-327.el7.x86_64 sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,compact" notes_010 =LD_LIBRARY_PATH = "/cpu2006/libs/32:/cpu2006/libs/64:/cpu2006/sh" notes_015 =OMP_NUM_THREADS = "16" notes_020 =