CPU2006 license: | 3 | Test date: | Mar-2016 |
---|---|---|---|
Test sponsor: | HPE | Hardware Availability: | Mar-2016 |
Tested by: | HPE | Software Availability: | Nov-2015 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5-2699 v4 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.60 GHz |
CPU MHz: | 2200 |
FPU: | Integrated |
CPU(s) enabled: | 22 cores, 1 chip, 22 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 55 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) |
Disk Subsystem: | 2 x 400 GB SAS SSD, RAID 1 |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 7.2 (Maipo) Kernel 3.10.0-327.el7.x86_64 |
Compiler: | C/C++: Version 16.0.0.101 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | xfs |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V10.2 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 44 | 593 | 725 | 594 | 723 | 595 | 723 | 44 | 486 | 884 | 484 | 888 | 486 | 884 |
401.bzip2 | 44 | 924 | 460 | 925 | 459 | 922 | 460 | 44 | 900 | 472 | 902 | 471 | 901 | 471 |
403.gcc | 44 | 555 | 638 | 557 | 636 | 555 | 638 | 44 | 555 | 638 | 557 | 636 | 555 | 638 |
429.mcf | 44 | 377 | 1060 | 378 | 1060 | 378 | 1060 | 44 | 377 | 1060 | 378 | 1060 | 378 | 1060 |
445.gobmk | 44 | 741 | 623 | 740 | 623 | 741 | 623 | 44 | 707 | 652 | 708 | 652 | 709 | 651 |
456.hmmer | 44 | 349 | 1180 | 349 | 1180 | 348 | 1180 | 44 | 321 | 1280 | 321 | 1280 | 321 | 1280 |
458.sjeng | 44 | 786 | 677 | 786 | 678 | 785 | 678 | 44 | 742 | 718 | 742 | 718 | 743 | 717 |
462.libquantum | 44 | 95.3 | 9570 | 95.2 | 9580 | 95.3 | 9570 | 44 | 95.3 | 9570 | 95.2 | 9580 | 95.3 | 9570 |
464.h264ref | 44 | 881 | 1100 | 880 | 1110 | 885 | 1100 | 44 | 850 | 1150 | 863 | 1130 | 854 | 1140 |
471.omnetpp | 44 | 675 | 407 | 677 | 406 | 675 | 407 | 44 | 663 | 415 | 665 | 414 | 665 | 414 |
473.astar | 44 | 655 | 472 | 654 | 472 | 654 | 472 | 44 | 655 | 472 | 654 | 472 | 654 | 472 |
483.xalancbmk | 44 | 358 | 849 | 358 | 847 | 353 | 859 | 44 | 358 | 849 | 358 | 847 | 353 | 859 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited" Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/transparent_hugepage/enabled Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc>
BIOS Configuration: Intel Hyperthreading Option set to Enabled Power Profile set to Custom Power Regulator set to Static High Performance Mode Minimum Processor Idle Power Core C-State set to C1E State Minimum Processor Idle Power Package C-State set to No Package State Collaborative Power Control set to Disabled QPI Snoop Configuration set to Cluster On Die Thermal Configuration set to Maximum Cooling Processor Power and Utilization Monitoring set to Disabled Memory Double Refresh Rate set to 1x Refresh Energy Performance Bias set to Maximum Performance Sysinfo program /home/specuser/specsuite/ic16/config/sysinfo.rev6914 $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 running on ml350bdwspec Tue Mar 22 20:29:42 2016 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/cpu2006/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz 1 "physical id"s (chips) 44 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 22 siblings : 44 physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 16 17 18 19 20 21 24 25 26 27 28 cache size : 28160 KB From /proc/meminfo MemTotal: 263840588 kB HugePages_Total: 0 Hugepagesize: 2048 kB From /etc/*release* /etc/*version* os-release: NAME="Red Hat Enterprise Linux Server" VERSION="7.2 (Maipo)" ID="rhel" ID_LIKE="fedora" VERSION_ID="7.2" PRETTY_NAME="Red Hat Enterprise Linux Server 7.2 (Maipo)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:redhat:enterprise_linux:7.2:GA:server" redhat-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) system-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) system-release-cpe: cpe:/o:redhat:enterprise_linux:7.2:ga:server uname -a: Linux ml350bdwspec 3.10.0-327.el7.x86_64 #1 SMP Thu Oct 29 17:29:29 EDT 2015 x86_64 x86_64 x86_64 GNU/Linux run-level 3 Mar 22 08:21 SPEC is set to: /home/specuser/specsuite/ic16 Filesystem Type Size Used Avail Use% Mounted on /dev/sda5 xfs 318G 303G 16G 96% /home Additional information from dmidecode: Warning: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. BIOS HP P92 02/22/2016 Memory: 16x UNKNOWN NOT AVAILABLE 8x UNKNOWN NOT AVAILABLE 32 GB 2 rank 2400 MHz (End of data from sysinfo program) Regarding the sysinfo display about the memory installed, the correct amount of memory is 256 GB and the dmidecode description should have one line reading as: 8x UNKNOWN NOT AVAILABLE 32 GB 2 rank 2400 MHz
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/home/specuser/specsuite/ic16/libs/32:/home/specuser/specsuite/ic16/libs/64:/home/specuser/specsuite/ic16/sh" Binaries compiled on a system with 1x Intel Core i5-4670K CPU + 32GB memory using RedHat EL 7.1
icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin |
icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin |
400.perlbench: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LINUX_IA32 |
401.bzip2: | -D_FILE_OFFSET_BITS=64 |
403.gcc: | -D_FILE_OFFSET_BITS=64 |
429.mcf: | -D_FILE_OFFSET_BITS=64 |
445.gobmk: | -D_FILE_OFFSET_BITS=64 |
456.hmmer: | -D_FILE_OFFSET_BITS=64 |
458.sjeng: | -D_FILE_OFFSET_BITS=64 |
462.libquantum: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LINUX |
464.h264ref: | -D_FILE_OFFSET_BITS=64 |
471.omnetpp: | -D_FILE_OFFSET_BITS=64 |
473.astar: | -D_FILE_OFFSET_BITS=64 |
483.xalancbmk: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LINUX |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/sh -lsmartheap |
icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin |
400.perlbench: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LP64 |
403.gcc: | -D_FILE_OFFSET_BITS=64 |
429.mcf: | -D_FILE_OFFSET_BITS=64 |
445.gobmk: | -D_FILE_OFFSET_BITS=64 |
456.hmmer: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LP64 |
458.sjeng: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LP64 |
462.libquantum: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LINUX |
464.h264ref: | -D_FILE_OFFSET_BITS=64 |
471.omnetpp: | -D_FILE_OFFSET_BITS=64 |
473.astar: | -D_FILE_OFFSET_BITS=64 |
483.xalancbmk: | -D_FILE_OFFSET_BITS=64 -DSPEC_CPU_LINUX |
400.perlbench: | -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | basepeak = yes |
429.mcf: | basepeak = yes |
445.gobmk: | -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -prof-use(pass 2) -par-num-threads=1(pass 1) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xCORE-AVX2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/sh -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |