# Invocation command line:
# /mnt/shm/cpu2006-sgi-ic16/bin/runspec --define dplace --rate 1280 -c sgi-cpu2006-1.2-ic16.0-lin64-ws-avx2-rate-20160301.cfg --define drop_caches -T base --define THP_enabled -o asc,cfg,csv,pdf int
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       Intel Compiler 16.0
#      Operating system version:    64-Bit RedHat Enterprise Linux64 7.1
#      Hardware:                    Intel processors supporting AVX2
#
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# 20150812 Intel Compiler 16.0 for Linux64
############################################################################
action      = validate
tune        = base,peak

     #
     ########################################################
     #         ATTENTION     ATTENTION     ATTENTION
     ########################################################
     #
     #     NOTE If you change fail_build then PLEASE also
     #     change the line 'define version', because
     #     SPEC review tools use 'ext' to track binaries.
     #
     ########################################################
%define version 20160301
     ext         = sgi-cpu2006-1.2-ic16.0-lin64-ws-avx2-rate-%{version}
     #
     # vvvvvvvvvvvv # do not change unless you read NOTE above
       fail_build=0 # do not change unless you read NOTE above
     # ^^^^^^^^^^^^ # do not change unless you read NOTE above
     #
     ########################################################
     #

#####################################################################################
# You can't change the line with fail_build=1 without changing the line ext=
# to reflect the data on which you re-built the binaries.
# In addition, the sw_compiler lines below, must be modified to match the description
# of the compiler being used to build the binaries
#####################################################################################
PATHSEP     = /
check_md5=1
reportable=1
bench_post_setup=sync
parallel_test=0
mean_anyway=1
sysinfo_program = specperl $[top]/config/sysinfo.rev6914 -f -p

flagsurl000=http://www.spec.org/cpu2006/flags/SGI-UV3000-Platform-Flags.xml
flagsurl001=http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64.xml

%ifdef %{default-platform-flags}
flagsurl2=Default-Platform-Flags.xml
%endif

# Set some environment variables
preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh

#
# These are listed as benchmark-tuning-extension-machine
#
int=default=default=default:
CC=  icc -m64
CXX= icpc -m64
OBJ = .o
SMARTHEAP32_DIR = /root/draddatz/cpu2006-sgi-ic16/sh
SMARTHEAP64_DIR = /root/draddatz/cpu2006-sgi-ic16/sh
PORTABILITY = -DSPEC_CPU_LP64

fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

# For UP systems, we need to know if the processors are ordered across cores first or in order
# If across cores, processors 0, 1, 2 and 3 are on distinct physical cores
# Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores

default:
%ifdef %{dplace}
submit       = let "DELAY = 1000000 / 160 * $SPECCOPYNUM "; usleep \$DELAY; dplace -r bB -c $SPECCOPYNUM $command
%else
submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command
%endif

parallel_setup = 10
parallel_setup_type = fork
parallel_setup_prefork = taskset -pc $SPECCOPYNUM $$


%ifdef %{no-numa}
submit       = taskset -c $SPECCOPYNUM $command
%endif

####################################################################
# Compiler options
# for Nehalem use -xSSE4.2
# for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3
####################################################################
default:
SSE          = -xCORE-AVX2
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div
FAST         =  $(SSE) -ipo -O3 -no-prec-div

################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_X64

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX


################################################################
# Tuning Flags
################################################################
#
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same
# flags are used in the same order for all benchmarks of a given language

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP64_DIR) -lsmartheap64
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    $(FASTNOSTATIC) -auto-p32 -opt-prefetch -opt-mem-layout-trans=3
CXXOPTIMIZE=  $(FASTNOSTATIC) -auto-p32 -opt-prefetch -opt-mem-layout-trans=3

fp=base=default=default:
OPTIMIZE=     $(FAST) -opt-prefetch
COPTIMIZE=    -auto-p32 -ansi-alias -opt-mem-layout-trans=3
CXXOPTIMIZE=  -auto-p32 -ansi-alias -opt-mem-layout-trans=3

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=         -ansi-alias -opt-mem-layout-trans=3
CXXOPTIMIZE=       -ansi-alias -opt-mem-layout-trans=3
PASS1_CFLAGS     = -prof-gen:threadsafe -par-num-threads=1
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = -prof-gen:threadsafe -par-num-threads=1
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen:threadsafe -par-num-threads=1
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = -prof-gen:threadsafe -par-num-threads=1
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64
COPTIMIZE= -auto-ilp32

401.bzip2=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -opt-prefetch  -auto-ilp32 -ansi-alias

403.gcc=peak=default:
COPTIMIZE = $(FASTNOSTATIC)
feedback=0

429.mcf=peak=default:
basepeak=yes

445.gobmk=peak=default:
PASS1_CFLAGS     = -prof-gen:threadsafe -par-num-threads=1
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen:threadsafe -par-num-threads=1
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE=  $(FASTNOSTATIC) -unroll2  -auto-ilp32
feedback=no

458.sjeng=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -unroll4 -auto-ilp32

462.libquantum=peak=default:
basepeak=yes

464.h264ref=peak=default:
COPTIMIZE=  -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE=  -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
basepeak=yes

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32
CXXOPTIMIZE=     -auto-ilp32
PASS1_CFLAGS =   -prof-gen:threadsafe -par-num-threads=1
PASS2_CFLAGS =   $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use
PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1
PASS2_CXXFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use
PASS1_FFLAGS =   -prof-gen:threadsafe -par-num-threads=1
PASS2_FFLAGS =   $(FASTNOSTATIC)                         -prof-use
PASS1_LDFLAGS =  -prof-gen:threadsafe -par-num-threads=1
PASS2_LDFLAGS =  $(FASTNOSTATIC)                         -prof-use

410.bwaves=peak=default:
basepeak=yes
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -scalar-rep-

433.milc=peak=default:
basepeak=yes

434.zeusmp=peak=default:
basepeak=yes
feedback=0

435.gromacs=peak=default:
OPTIMIZE= -opt-prefetch

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
basepeak=yes

####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

444.namd=peak=default:
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
basepeak=yes

450.soplex=peak=default:
PORTABILITY = -D_FILE_OFFSET_BITS=64
CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

453.povray=peak=default:
CXXOPTIMIZE= -unroll4  -ansi-alias

454.calculix=peak=default:
basepeak=yes

459.GemsFDTD=peak=default:
basepeak=yes
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

465.tonto=peak=default:
OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3

470.lbm=peak=default:
basepeak=yes

481.wrf=peak=default:
basepeak=yes

482.sphinx3=peak=default:
basepeak=yes

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 4
test_sponsor     = SGI
hw_avail         = Aug-2015
sw_avail         = May-2016
tester           = SGI
hw_cpu_name      = Intel Xeon E5-4627 v3
hw_cpu_char      = Intel Turbo Boost Technology up to 3.20 GHz
hw_cpu_mhz       = 2600
hw_disk          = 16 TB tmpfs
hw_fpu           = Integrated
hw_memory        = 16 TB (1024 x 16 GB 2Rx4 PC4-2133P-R)
hw_model         = SGI UV 3000 (Intel Xeon E5-4627 v3, 2.60 GHz)
hw_ncpuorder     = 4-256 chips
hw_ncores        = 1280
hw_nchips        = 128
hw_ncoresperchip = 10
hw_nthreadspercore = 1
hw_other         = NUMAlink6 routers
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 25 MB I+D on chip per chip
hw_ocache        = None
hw_vendor        = SGI
prepared_by      = Dave Raddatz
sw_file          = tmpfs
sw_os000         = SUSE Linux Enterprise Server 12 (x86_64) SP1,
sw_os001         = Kernel 3.12.53-60.30-default
sw_state         = Run level 3 (multi-user)
notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_001 = was used to generate numactl commands to bind each copy to a specific processor.
notes_submit_002 = For details, please see the config file.
%ifdef %{dplace}
notes_submit_000 = The dplace mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_005 = was used to generate dplace commands to bind each copy to a specific processor.
notes_submit_010 = Benchmark copies were launched in a staggered fashion to minimize kernel contention
notes_submit_015 = associated with synchronized launches.
notes_submit_020 = For details, please see the config file.
%endif
%ifdef %{no-numa}
notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor.
notes_submit_002 = For details, please see the config file.
%endif

notes_os_000     = Stack size set to unlimited using "ulimit -s unlimited"
notes_os_005     =
notes_os_010     = The tmpfs filesystem was set up with:
notes_os_015     =   mkdir -p /mnt/shm/cpu2006-sgi-ic16
notes_os_020     =   mount -t tmpfs -o size=16384g,rw tmpfs /mnt/shm/cpu2006-sgi-ic16


int=default=default=default:
sw_compiler000   = C/C++: Version 16.0.2.181 of Intel C++ Studio XE
sw_compiler001   = for Linux
sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = Not Applicable

default:
%ifdef %{THP_enabled}
notes_015        = Transparent Huge Pages enabled with:
notes_020        = echo always > /sys/kernel/mm/transparent_hugepage/enabled
%endif

%ifdef %{THP_disabled}
notes_200        = Transparent Huge Pages disabled with:
notes_201        = echo never  > /sys/kernel/mm/transparent_hugepage/enabled
%endif

%ifdef %{drop_caches}
notes_025        = Filesystem page cache cleared with:
notes_030        = echo 1 >       /proc/sys/vm/drop_caches
%endif

%ifdef %{invoke_with_interleave}
notes_204        = runspec command invoked through numactl i.e.:
notes_205        = numactl --interleave=all runspec <etc>
%endif

fp=default=default=default:
sw_compiler001   = C/C++: Version 16.0.2.181 of Intel C++ Studio XE
sw_compiler002   = for Linux;
sw_compiler004   = Fortran: Version 16.0.2.181 of Intel Fortran
sw_compiler005   = Studio XE for Linux
sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = Not Applicable
sw_other001      = None


# The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6914 -f -p'
default:
# Sysinfo program /mnt/shm/cpu2006-sgi-ic16/config/sysinfo.rev6914
# $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1
# running on uv3kbig Tue Mar  1 21:02:28 2016
#
# This section contains SUT (System Under Test) info as seen by
# some common utilities.  To remove or add to this section, see:
#   http://www.spec.org/cpu2006/Docs/config.html#sysinfo
#
# From /proc/cpuinfo
#    model name : Intel(R) Xeon(R) CPU E5-4627 v3 @ 2.60GHz
#       128 "physical id"s (chips)
#       1280 "processors"
#    cores, siblings (Caution: counting these is hw and system dependent.  The
#    following excerpts from /proc/cpuinfo might not be reliable.  Use with
#    caution.)
#       cpu cores : 10
#       siblings  : 10
#       physical 0: cores 0 1 2 3 4 8 9 10 11 12
#       physical 1: cores 0 1 2 3 4 8 9 10 11 12
#       physical 2: cores 0 1 2 3 4 8 9 10 11 12
#       physical 3: cores 0 1 2 3 4 8 9 10 11 12
#       physical 4: cores 0 1 2 3 4 8 9 10 11 12
#       physical 5: cores 0 1 2 3 4 8 9 10 11 12
#       physical 6: cores 0 1 2 3 4 8 9 10 11 12
#       physical 7: cores 0 1 2 3 4 8 9 10 11 12
#       physical 8: cores 0 1 2 3 4 8 9 10 11 12
#       physical 9: cores 0 1 2 3 4 8 9 10 11 12
#       physical 10: cores 0 1 2 3 4 8 9 10 11 12
#       physical 11: cores 0 1 2 3 4 8 9 10 11 12
#       physical 12: cores 0 1 2 3 4 8 9 10 11 12
#       physical 13: cores 0 1 2 3 4 8 9 10 11 12
#       physical 14: cores 0 1 2 3 4 8 9 10 11 12
#       physical 15: cores 0 1 2 3 4 8 9 10 11 12
#       physical 16: cores 0 1 2 3 4 8 9 10 11 12
#       physical 17: cores 0 1 2 3 4 8 9 10 11 12
#       physical 18: cores 0 1 2 3 4 8 9 10 11 12
#       physical 19: cores 0 1 2 3 4 8 9 10 11 12
#       physical 20: cores 0 1 2 3 4 8 9 10 11 12
#       physical 21: cores 0 1 2 3 4 8 9 10 11 12
#       physical 22: cores 0 1 2 3 4 8 9 10 11 12
#       physical 23: cores 0 1 2 3 4 8 9 10 11 12
#       physical 24: cores 0 1 2 3 4 8 9 10 11 12
#       physical 25: cores 0 1 2 3 4 8 9 10 11 12
#       physical 26: cores 0 1 2 3 4 8 9 10 11 12
#       physical 27: cores 0 1 2 3 4 8 9 10 11 12
#       physical 28: cores 0 1 2 3 4 8 9 10 11 12
#       physical 29: cores 0 1 2 3 4 8 9 10 11 12
#       physical 30: cores 0 1 2 3 4 8 9 10 11 12
#       physical 31: cores 0 1 2 3 4 8 9 10 11 12
#       physical 32: cores 0 1 2 3 4 8 9 10 11 12
#       physical 33: cores 0 1 2 3 4 8 9 10 11 12
#       physical 34: cores 0 1 2 3 4 8 9 10 11 12
#       physical 35: cores 0 1 2 3 4 8 9 10 11 12
#       physical 36: cores 0 1 2 3 4 8 9 10 11 12
#       physical 37: cores 0 1 2 3 4 8 9 10 11 12
#       physical 38: cores 0 1 2 3 4 8 9 10 11 12
#       physical 39: cores 0 1 2 3 4 8 9 10 11 12
#       physical 40: cores 0 1 2 3 4 8 9 10 11 12
#       physical 41: cores 0 1 2 3 4 8 9 10 11 12
#       physical 42: cores 0 1 2 3 4 8 9 10 11 12
#       physical 43: cores 0 1 2 3 4 8 9 10 11 12
#       physical 44: cores 0 1 2 3 4 8 9 10 11 12
#       physical 45: cores 0 1 2 3 4 8 9 10 11 12
#       physical 46: cores 0 1 2 3 4 8 9 10 11 12
#       physical 47: cores 0 1 2 3 4 8 9 10 11 12
#       physical 48: cores 0 1 2 3 4 8 9 10 11 12
#       physical 49: cores 0 1 2 3 4 8 9 10 11 12
#       physical 50: cores 0 1 2 3 4 8 9 10 11 12
#       physical 51: cores 0 1 2 3 4 8 9 10 11 12
#       physical 52: cores 0 1 2 3 4 8 9 10 11 12
#       physical 53: cores 0 1 2 3 4 8 9 10 11 12
#       physical 54: cores 0 1 2 3 4 8 9 10 11 12
#       physical 55: cores 0 1 2 3 4 8 9 10 11 12
#       physical 56: cores 0 1 2 3 4 8 9 10 11 12
#       physical 57: cores 0 1 2 3 4 8 9 10 11 12
#       physical 58: cores 0 1 2 3 4 8 9 10 11 12
#       physical 59: cores 0 1 2 3 4 8 9 10 11 12
#       physical 60: cores 0 1 2 3 4 8 9 10 11 12
#       physical 61: cores 0 1 2 3 4 8 9 10 11 12
#       physical 62: cores 0 1 2 3 4 8 9 10 11 12
#       physical 63: cores 0 1 2 3 4 8 9 10 11 12
#       physical 64: cores 0 1 2 3 4 8 9 10 11 12
#       physical 65: cores 0 1 2 3 4 8 9 10 11 12
#       physical 66: cores 0 1 2 3 4 8 9 10 11 12
#       physical 67: cores 0 1 2 3 4 8 9 10 11 12
#       physical 68: cores 0 1 2 3 4 8 9 10 11 12
#       physical 69: cores 0 1 2 3 4 8 9 10 11 12
#       physical 70: cores 0 1 2 3 4 8 9 10 11 12
#       physical 71: cores 0 1 2 3 4 8 9 10 11 12
#       physical 72: cores 0 1 2 3 4 8 9 10 11 12
#       physical 73: cores 0 1 2 3 4 8 9 10 11 12
#       physical 74: cores 0 1 2 3 4 8 9 10 11 12
#       physical 75: cores 0 1 2 3 4 8 9 10 11 12
#       physical 76: cores 0 1 2 3 4 8 9 10 11 12
#       physical 77: cores 0 1 2 3 4 8 9 10 11 12
#       physical 78: cores 0 1 2 3 4 8 9 10 11 12
#       physical 79: cores 0 1 2 3 4 8 9 10 11 12
#       physical 80: cores 0 1 2 3 4 8 9 10 11 12
#       physical 81: cores 0 1 2 3 4 8 9 10 11 12
#       physical 82: cores 0 1 2 3 4 8 9 10 11 12
#       physical 83: cores 0 1 2 3 4 8 9 10 11 12
#       physical 84: cores 0 1 2 3 4 8 9 10 11 12
#       physical 85: cores 0 1 2 3 4 8 9 10 11 12
#       physical 86: cores 0 1 2 3 4 8 9 10 11 12
#       physical 87: cores 0 1 2 3 4 8 9 10 11 12
#       physical 88: cores 0 1 2 3 4 8 9 10 11 12
#       physical 89: cores 0 1 2 3 4 8 9 10 11 12
#       physical 90: cores 0 1 2 3 4 8 9 10 11 12
#       physical 91: cores 0 1 2 3 4 8 9 10 11 12
#       physical 92: cores 0 1 2 3 4 8 9 10 11 12
#       physical 93: cores 0 1 2 3 4 8 9 10 11 12
#       physical 94: cores 0 1 2 3 4 8 9 10 11 12
#       physical 95: cores 0 1 2 3 4 8 9 10 11 12
#       physical 96: cores 0 1 2 3 4 8 9 10 11 12
#       physical 97: cores 0 1 2 3 4 8 9 10 11 12
#       physical 98: cores 0 1 2 3 4 8 9 10 11 12
#       physical 99: cores 0 1 2 3 4 8 9 10 11 12
#       physical 100: cores 0 1 2 3 4 8 9 10 11 12
#       physical 101: cores 0 1 2 3 4 8 9 10 11 12
#       physical 102: cores 0 1 2 3 4 8 9 10 11 12
#       physical 103: cores 0 1 2 3 4 8 9 10 11 12
#       physical 104: cores 0 1 2 3 4 8 9 10 11 12
#       physical 105: cores 0 1 2 3 4 8 9 10 11 12
#       physical 106: cores 0 1 2 3 4 8 9 10 11 12
#       physical 107: cores 0 1 2 3 4 8 9 10 11 12
#       physical 108: cores 0 1 2 3 4 8 9 10 11 12
#       physical 109: cores 0 1 2 3 4 8 9 10 11 12
#       physical 110: cores 0 1 2 3 4 8 9 10 11 12
#       physical 111: cores 0 1 2 3 4 8 9 10 11 12
#       physical 112: cores 0 1 2 3 4 8 9 10 11 12
#       physical 113: cores 0 1 2 3 4 8 9 10 11 12
#       physical 114: cores 0 1 2 3 4 8 9 10 11 12
#       physical 115: cores 0 1 2 3 4 8 9 10 11 12
#       physical 116: cores 0 1 2 3 4 8 9 10 11 12
#       physical 117: cores 0 1 2 3 4 8 9 10 11 12
#       physical 118: cores 0 1 2 3 4 8 9 10 11 12
#       physical 119: cores 0 1 2 3 4 8 9 10 11 12
#       physical 120: cores 0 1 2 3 4 8 9 10 11 12
#       physical 121: cores 0 1 2 3 4 8 9 10 11 12
#       physical 122: cores 0 1 2 3 4 8 9 10 11 12
#       physical 123: cores 0 1 2 3 4 8 9 10 11 12
#       physical 124: cores 0 1 2 3 4 8 9 10 11 12
#       physical 125: cores 0 1 2 3 4 8 9 10 11 12
#       physical 126: cores 0 1 2 3 4 8 9 10 11 12
#       physical 127: cores 0 1 2 3 4 8 9 10 11 12
#    cache size : 25600 KB
#
# From /proc/meminfo
#    MemTotal:       16412148060 kB
#    HugePages_Total:       0
#    Hugepagesize:       2048 kB
#
# /usr/bin/lsb_release -d
#    SUSE Linux Enterprise Server 12 SP1
#
# From /etc/*release* /etc/*version*
#    SuSE-release:
#       SUSE Linux Enterprise Server 12 (x86_64)
#       VERSION = 12
#       PATCHLEVEL = 1
#       # This file is deprecated and will be removed in a future service pack or
#       release.
#       # Please check /etc/os-release for details about this release.
#    os-release:
#       NAME="SLES"
#       VERSION="12-SP1"
#       VERSION_ID="12.1"
#       PRETTY_NAME="SUSE Linux Enterprise Server 12 SP1"
#       ID="sles"
#       ANSI_COLOR="0;32"
#       CPE_NAME="cpe:/o:suse:sles:12:sp1"
#    sgi-accelerate-release: SGI Accelerate 1.12, Build
#    714a122.sles12sp1-1602291900
#    sgi-foundation-release: SGI Foundation Software 2.14, Build
#    714a122.sles12sp1-1602291900
#    sgi-mpi-release: SGI MPI 1.12, Build 714a122.sles12sp1-1602291900
#    sgi-react-release: SGI REACT 1.12, Build 714a122.sles12sp1-1602291900
#    sgi-release: SGI Performance Suite 1.12
#
# uname -a:
#    Linux uv3kbig 3.12.53-60.30-default #1 SMP Wed Feb 10 14:41:46 UTC 2016
#    (e57129f) x86_64 x86_64 x86_64 GNU/Linux
#
# run-level 3 Mar 1 15:08
#
# SPEC is set to: /mnt/shm/cpu2006-sgi-ic16
#    Filesystem     Type   Size  Used Avail Use% Mounted on
#    tmpfs          tmpfs   16T  2.1G   16T   1% /mnt/shm/cpu2006-sgi-ic16
# Additional information from dmidecode:
#
#    Warning: Use caution when you interpret this section. The 'dmidecode' program
#    reads system data which is "intended to allow hardware to be accurately
#    determined", but the intent may not be met, as there are frequent changes to
#    hardware, firmware, and the "DMTF SMBIOS" standard.
#
#   BIOS Silicon Graphics International Corp. SGI UV 3000 series BIOS 01/15/2015
#   Memory:
#    373x Samsung M393A2G40DB0-CPB 16 GB 1067 MHz
#
# (End of data from sysinfo program)
# hw_cpu_name    = Intel Xeon E5-4627 v3
# hw_disk        = 16 TB  add more disk info here
# hw_memory001   = 15651.844 GB fixme: If using DDR3, format is:
# hw_memory002   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
# hw_nchips      = 128
# prepared_by    = root  (is never output, only tags rawfile)
# sw_file        = tmpfs
# sw_os001       = SUSE Linux Enterprise Server 12 SP1
# sw_os002       = 3.12.53-60.30-default
# sw_state       = Run level 3 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =LD_LIBRARY_PATH = "/mnt/shm/cpu2006-sgi-ic16/libs/32:/mnt/shm/cpu2006-sgi-ic16/libs/64:/mnt/shm/cpu2006-sgi-ic16/sh"
notes_010 =
sw_other001 = Microquill SmartHeap V10.2
sw_other002 = SGI Foundation Software 2.14,
sw_other003 = Build 714a122.sles12sp1-1602291900
sw_other004 = SGI Accelerate 1.12,
sw_other005 = Build 714a122.sles12sp1-1602291900
notes_plat_update_000 = The dmidecode output is in error - the memory was running at 2133.