# Invocation command line: # /home/cpu2006-1.2-ic16.0/bin/runspec --define default-platform-flags -c TS150-cpu2006-1.2-ic16.0-lin64-avx2-speed-20150812.cfg --define cores=4 --define THP_enabled -T all -o all fp # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 16.0 # Operating system version: 64-Bit RedHat Enterprise Linux64 7.1 # Hardware: Intel processors supporting AVX2 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # 20150812 Intel Compiler 16.0 for Linux64 ############################################################################ action = validate tune = base,peak # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20150812 ext = cpu2006-1.2-ic16.0-lin64-avx2-speed-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # PATHSEP = / check_md5=1 reportable=1 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6914 use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2006/flags/Default-Platform-Flags.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh preENV_OMP_NUM_THREADS = %{cores} %ifdef %{intspeed} preENV_KMP_AFFINITY = granularity=fine,scatter %else preENV_KMP_AFFINITY = granularity=fine,compact,1,0 %endif # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = /sh SMARTHEAP64_DIR = /sh fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xCORE-AVX2 FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ ################################################################ # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language ################################################################ 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -auto-p32 fp=base=default=default: FOPTIMIZE= $(FAST) -parallel -opt-prefetch COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias CXXOPTIMIZE= $(FAST) -opt-prefetch -ansi-alias ################################################################ # Peak Tuning Flags int 2005 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench,401.bzip2,429.mcf,445.gobmk,458.sjeng,464.h264ref,471.omnetpp,473.astar,483.xalancbmk=peak: submit = taskset -c $SPECCOPYNUM $command 400.perlbench=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin PORTABILITY= -D_FILE_OFFSET_BITS=64 CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -opt-prefetch -ansi-alias 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -opt-prefetch -no-prec-div -ansi-alias 403.gcc=peak=default: COPTIMIZE= $(FASTNOSTATIC) -inline-calloc -opt-malloc-options=3 -auto-ilp32 feedback=0 429.mcf=peak=default: COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32 feedback=0 submit = taskset -c $SPECCOPYNUM $command 445.gobmk=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin PORTABILITY= -D_FILE_OFFSET_BITS=64 COPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: basepeak=yes 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: basepeak=yes 471.omnetpp=peak=default: CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= -opt-ra-region-strategy=block -ansi-alias 473.astar=peak=default: CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -auto-p32 feedback=0 submit = taskset -c $SPECCOPYNUM $command 483.xalancbmk=peak=default: CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -ansi-alias feedback=no ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -auto-ilp32 -ansi-alias PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_FFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: basepeak=yes 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: OPTIMIZE= $(FASTNOSTATIC) feedback=0 459.GemsFDTD=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -opt-prefetch -parallel 465.tonto=peak=default: OPTIMIZE= -inline-calloc -opt-malloc-options=3 -auto -unroll4 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 9017 test_sponsor = Lenovo Group Limited hw_avail = Oct-2015 sw_avail = Aug-2015 tester = Lenovo Group Limited hw_cpu_name = Intel Xeon E3-1220 v5 hw_cpu_char = Intel Turbo Boost Technology up to 3.50 GHz hw_cpu_mhz = 3000 hw_disk = 1 x 800 GB SATA SSD hw_fpu = Integrated hw_memory000 = 32 GB (4 x 8 GB 2Rx8 PC4-2133P-U) hw_model000 = Lenovo ThinkServer TS150 hw_model001 = (3.00 GHz, Intel Xeon E3-1220 v5) hw_ncpuorder = 1 chip hw_ncores = 4 hw_nchips = 1 hw_ncoresperchip = 4 hw_nthreadspercore = 1 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_vendor = Lenovo Group Limited prepared_by = Lenovo Group Limited sw_file = xfs sw_os001 = SUSE Linux Enterprise Server 12 (x86_64) sw_state = Run level 3 (multi-user) notes_025 = Binaries compiled on a system with 1x Intel Core i5-4670K CPU + 32GB notes_030 = memory using RedHat EL 7.1 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" int=default=default=default: sw_compiler001 = C/C++: Version 16.0.0.101 of Intel C++ Studio XE sw_compiler002 = for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other001 = Microquill SmartHeap V10.2 default: %ifdef %{THP_enabled} notes_035 = Transparent Huge Pages enabled with: notes_040 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler000 = C/C++: Version 16.0.0.101 of Intel C++ Studio XE sw_compiler001 = for Linux; sw_compiler002 = Fortran: Version 16.0.0.101 of Intel Fortran sw_compiler003 = Studio XE for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit sw_other = None # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6914' default: notes_plat_sysinfo_000 = Sysinfo program /home/cpu2006-1.2-ic16.0/config/sysinfo.rev6914 notes_plat_sysinfo_005 = $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 notes_plat_sysinfo_010 = running on TS150 Wed Dec 30 16:42:07 2015 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 4 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 4 notes_plat_sysinfo_080 = siblings : 4 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 notes_plat_sysinfo_090 = cache size : 8192 KB notes_plat_sysinfo_095 = notes_plat_sysinfo_100 = From /proc/meminfo notes_plat_sysinfo_105 = MemTotal: 32933544 kB notes_plat_sysinfo_110 = HugePages_Total: 0 notes_plat_sysinfo_115 = Hugepagesize: 2048 kB notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = From /etc/*release* /etc/*version* notes_plat_sysinfo_130 = SuSE-release: notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_140 = VERSION = 12 notes_plat_sysinfo_145 = PATCHLEVEL = 0 notes_plat_sysinfo_150 = # This file is deprecated and will be removed in a future service pack or notes_plat_sysinfo_155 = release. notes_plat_sysinfo_160 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_165 = os-release: notes_plat_sysinfo_170 = NAME="SLES" notes_plat_sysinfo_175 = VERSION="12" notes_plat_sysinfo_180 = VERSION_ID="12" notes_plat_sysinfo_185 = PRETTY_NAME="SUSE Linux Enterprise Server 12" notes_plat_sysinfo_190 = ID="sles" notes_plat_sysinfo_195 = ANSI_COLOR="0;32" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:suse:sles:12" notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = uname -a: notes_plat_sysinfo_215 = Linux TS150 3.12.28-4-default #1 SMP Thu Sep 25 17:02:34 UTC 2014 (9879bd4) notes_plat_sysinfo_220 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = run-level 3 Dec 28 11:32 notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = SPEC is set to: /home/cpu2006-1.2-ic16.0 notes_plat_sysinfo_245 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_250 = /dev/sda3 xfs 693G 27G 667G 4% /home notes_plat_sysinfo_255 = Additional information from dmidecode: notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_270 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_275 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_280 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = BIOS LENOVO FWKT32A 12/25/2015 notes_plat_sysinfo_295 = Memory: notes_plat_sysinfo_300 = 4x Samsung M378A1G43DB0-CPB 8 GB 2 rank 2133 MHz notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E3-1220 v5 hw_disk = 1 x 800 GB SATA SSD hw_nchips = 1 prepared_by = Lenovo Group Limited sw_file = xfs sw_os000 = SUSE Linux Enterprise Server 12 (x86_64) sw_os001 = Kernel 3.12.28-4-default sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_010 =LD_LIBRARY_PATH = "/home/cpu2006-1.2-ic16.0/libs/32:/home/cpu2006-1.2-ic16.0/libs/64:/home/cpu2006-1.2-ic16.0/sh" notes_015 =OMP_NUM_THREADS = "4" notes_020 = notes_plat_form_000 =BIOS configuration: notes_plat_form_005 = EIST Support set to Enabled notes_plat_form_010 = C1E Support set to Enabled notes_plat_form_015 = C State Support set to Enabled notes_plat_form_020 = Turbo Mode set to Enable