# Invocation command line:
# /SPEC/bin/runspec --rate 80 -c A2040c_E7-4820_v3_4s_RevA.cfg --define smt --define cores=80 --define physicalfirst --flagsurl=Intel-ic14.0-official-linux64.xml,NEC-platform-Settings-V1.2-A2040c-RevA.xml --define invoke_with_interleave --define drop_caches --define THP_enabled -o all int
# output_root was not used for this run
############################################################################
# Invocation command line:
# ./runspec --rate 80 -c A2040c_E7-4820_v3_4s_RevA.cfg --define smt --define cores=80 --define physicalfirst --flagsurl=Intel-ic14.0-official-linux64.xml,NEC-platform-Settings-V1.2-A2040c-RevA.xml --define invoke_with_interleave --define drop_caches --define THP_enabled -o all int
# output_root was not used for this run
############################################################################
# SPEC CPU2006 Intel Linux64 config file
############################################################################
action      = validate
tune        = base,peak
ext         = cpu2006.1.2.ic14.0.linux64.rhel6.6.rate.apl2015
PATHSEP     = /
check_md5=1
reportable=1
bench_post_setup=sync
parallel_test=0
mean_anyway=1
sysinfo_program = specperl $[top]/Docs/sysinfo.rev6965 -f -p

preENV_LD_LIBRARY_PATH = /opt/SmartHeap_10mc/lib:/opt/SmartHeap_10mc/lib64:/opt/intel/composer_xe_2013_sp1.3.174/compiler/lib/ia32:/opt/intel/composer_xe_2013_sp1.3.174/compiler/lib/intel64

int=default=default=default:
CC=  icc  -m32
CXX= icpc -m32
OBJ = .o

SMARTHEAP32_DIR = /opt/SmartHeap_10mc/lib
SMARTHEAP64_DIR = /opt/SmartHeap_10mc/lib64

fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

# For UP systems, we need to know if the processors are ordered across cores first or in order
# If across cores, processors 0, 1, 2 and 3 are on distinct physical cores
# Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores

default:
submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command

%ifdef %{no-numa}
submit       = taskset -c $SPECCOPYNUM $command
%endif

####################################################################
# Compiler options
####################################################################
default:
SSE          = -xCORE-AVX2
FAST         =  $(SSE) -ipo -O3 -no-prec-div -static
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div

####################################################################
# portability & libraries
####################################################################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX


################################################################
# Tuning Flags
################################################################

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    $(FASTNOSTATIC) -opt-prefetch -opt-mem-layout-trans=3
CXXOPTIMIZE=  $(FASTNOSTATIC) -opt-prefetch -opt-mem-layout-trans=3

fp=base=default=default:
OPTIMIZE=     $(FAST)  -opt-prefetch
COPTIMIZE=    -auto-p32 -ansi-alias -opt-mem-layout-trans=3
CXXOPTIMIZE=  -auto-p32 -ansi-alias -opt-mem-layout-trans=3

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=         -ansi-alias -opt-mem-layout-trans=3
CXXOPTIMIZE=       -ansi-alias -opt-mem-layout-trans=3
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = -prof-gen
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64
COPTIMIZE= -auto-ilp32

401.bzip2=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -opt-prefetch  -auto-ilp32 -ansi-alias

403.gcc=peak=default:
COPTIMIZE        = $(FASTNOSTATIC)
feedback=0

429.mcf=peak=default:
basepeak=yes

445.gobmk=peak=default:
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
CC               = icc -m64
CPORTABILITY     = -DSPEC_CPU_LP64
COPTIMIZE        = $(FASTNOSTATIC) -unroll2 -auto-ilp32
feedback=no

458.sjeng=peak=default:
CC               = icc -m64
CPORTABILITY     = -DSPEC_CPU_LP64
COPTIMIZE        = -unroll4 -auto-ilp32

462.libquantum=peak=default:
basepeak=yes

464.h264ref=peak=default:
COPTIMIZE        = -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE      = -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
basepeak=yes

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32
CXXOPTIMIZE=     -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   $(FASTNOSTATIC)                         -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  $(FASTNOSTATIC)                         -prof-use

410.bwaves=peak=default:
basepeak=yes
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -scalar-rep- -static

433.milc=peak=default:
OPTIMIZE= -static

434.zeusmp=peak=default:
basepeak=yes
feedback=0

435.gromacs=peak=default:
OPTIMIZE= -opt-prefetch -static

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
OPTIMIZE=     $(FAST) -opt-prefetch
feedback=no
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

444.namd=peak=default:
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
basepeak=yes

450.soplex=peak=default:
PORTABILITY =
CXX= icpc -m32
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

453.povray=peak=default:
CXXOPTIMIZE= -unroll4  -ansi-alias

454.calculix=peak=default:
basepeak=yes

459.GemsFDTD=peak=default:
basepeak=yes
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

465.tonto=peak=default:
OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3

470.lbm=peak=default:
basepeak=yes

481.wrf=peak=default:
OPTIMIZE=     $(FAST)
feedback=0

482.sphinx3=peak=default:
PORTABILITY=
CC= icc -m32
OPTIMIZE= $(FASTNOSTATIC) -opt-mem-layout-trans=3
COPTIMIZE= -unroll2
feedback=no

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 9006
test_sponsor     = NEC Corporation
hw_avail         = Jul-2015
sw_avail         = Mar-2015
tester           = NEC Corporation
hw_cpu_name      = Intel Xeon E7-4820 v3
hw_cpu_mhz       = 1900
hw_disk          = 3 x 300 GB SAS, 15000 RPM, RAID 0
hw_fpu           = Integrated
hw_memory000     = 1 TB (64 x 16 GB 2Rx4 PC4-2133P-R, running at
hw_memory001 = 1333 MHz)
hw_model         = Express5800/A2040c (Intel Xeon E7-4820 v3)
hw_ncpuorder     = 2,3,4 chips
hw_ncores        = 40
hw_nchips        = 4
hw_ncoresperchip = 10
hw_nthreadspercore = 2
hw_other         = None
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 25 MB I+D on chip per chip
hw_ocache        = None
hw_vendor        = NEC Corporation
prepared_by      = NEC Corporation
sw_os000         = Red Hat Enterprise Linux Server release 6.6
sw_os001 = (Santiago)
sw_os002         = Kernel 2.6.32-504.12.2.el6.x86_64
sw_file          = ext4
sw_state         = Run level 3 (multi-user)

notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor.
notes_submit_010 = For details, please see the config file.

%ifdef %{no-numa}
notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_005 = was used to generate taskset commands to bind each copy to a specific processor.
notes_submit_010 = For details, please see the config file.
%endif

notes_os_000     = Stack size set to unlimited using "ulimit -s unlimited"
notes_os_005     = Zone reclaim mode enabled with:
notes_os_010     = echo 1 > /proc/sys/vm/zone_reclaim_mode

notes_plat_000   = BIOS Settings:
notes_plat_005   =  Memory RAS Mode: Independent
notes_plat_010   =  VT-x : Disabled
notes_plat_015   =  Processor C6 Report : Disabled
notes_plat_020   =  OS Performance Tuning : Disabled
notes_plat_025   =  Energy Performance : Performance
notes_plat_030   =  Patrol Scrub : Disabled
notes_plat_035   =  Demand Scrub : Disabled
notes_plat_040   =  Memory P.E. Retry : Disabled

int=default=default=default:
sw_compiler000   = C/C++: Version 14.0.3.174 of Intel C++ Studio XE
sw_compiler001 = for Linux
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit
sw_other         = Microquill SmartHeap Multi-Core V10.01

fp=default=default=default:
sw_compiler000   = C/C++: Version 14.0.3.174 of Intel C++ Studio XE for Linux
sw_compiler001   = Fortran: Version 14.0.3.174 of Intel C++ Studio XE for Linux
sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other001      = None

default:
%ifdef %{THP_enabled}
notes_015        = Transparent Huge Pages enabled with:
notes_020        = echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled
%endif

%ifdef %{THP_disabled}
notes_015        = Transparent Huge Pages disabled with:
notes_020        = echo never  > /sys/kernel/mm/redhat_transparent_hugepage/enabled
%endif

%ifdef %{drop_caches}
notes_025        = Filesystem page cache cleared with:
notes_030        = echo 1 > /proc/sys/vm/drop_caches
%endif

%ifdef %{invoke_with_interleave}
notes_035        = runspec command invoked through numactl i.e.:
notes_040        = numactl --interleave=all runspec <etc>
%endif

default:
flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic14.0-official-linux64.20140128.xml
flagsurl001 = http://www.spec.org/cpu2006/flags/NEC-platform-Settings-V1.2-A2040c-RevA.xml


# The following settings were obtained by running 'specperl $[top]/Docs/sysinfo.rev6965 -f -p'
default:
# Sysinfo program /SPEC/Docs/sysinfo.rev6965
# $Rev: 6965 $ $Date:: 2015-04-21 #$ 2b16a5edd2d910f7b8c27ba56db11dfd
# running on localhost.localdomain Fri Jun 12 06:44:49 2015
#
# This section contains SUT (System Under Test) info as seen by
# some common utilities.  To remove or add to this section, see:
#   http://www.spec.org/cpu2006/Docs/config.html#sysinfo
#
# From /proc/cpuinfo
#    model name : Intel(R) Xeon(R) CPU E7-4820 v3 @ 1.90GHz
#       4 "physical id"s (chips)
#       80 "processors"
#    cores, siblings (Caution: counting these is hw and system dependent.  The
#    following excerpts from /proc/cpuinfo might not be reliable.  Use with
#    caution.)
#       cpu cores : 10
#       siblings  : 20
#       physical 0: cores 0 1 2 3 4 8 9 10 11 12
#       physical 1: cores 0 1 2 3 4 8 9 10 11 12
#       physical 2: cores 0 1 2 3 4 8 9 10 11 12
#       physical 3: cores 0 1 2 3 4 8 9 10 11 12
#    cache size : 25600 KB
#
# From /proc/meminfo
#    MemTotal:       1058594132 kB
#    HugePages_Total:       0
#    Hugepagesize:       2048 kB
#
# /usr/bin/lsb_release -d
#    Red Hat Enterprise Linux Server release 6.6 (Santiago)
#
# From /etc/*release* /etc/*version*
#    redhat-release: Red Hat Enterprise Linux Server release 6.6 (Santiago)
#    system-release: Red Hat Enterprise Linux Server release 6.6 (Santiago)
#    system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server
#
# uname -a:
#    Linux localhost.localdomain 2.6.32-504.12.2.el6.x86_64 #1 SMP Sun Feb 1
#    12:14:02 EST 2015 x86_64 x86_64 x86_64 GNU/Linux
#
# run-level 3 Jun 12 06:21
#
# SPEC is set to: /SPEC
#    Filesystem           Type  Size  Used Avail Use% Mounted on
#    /dev/mapper/VolGroup-lv_root
#                         ext4  723G  234G  453G  35% /
# Additional information from dmidecode:
#
#    Warning: Use caution when you interpret this section. The 'dmidecode' program
#    reads system data which is "intended to allow hardware to be accurately
#    determined", but the intent may not be met, as there are frequent changes to
#    hardware, firmware, and the "DMTF SMBIOS" standard.
#
#   BIOS American Megatrends Inc. 5.6.0200 05/27/2015
#   Memory:
#    64x Samsung M393A2G40DB0-CPB 16 GB 2 rank 2133 MHz, configured at 1333 MHz
#
# (End of data from sysinfo program)
# hw_cpu_name    = Intel Xeon E7-4820 v3
# hw_disk        = 723 GB  add more disk info here
# hw_memory001   = 1009.554 GB fixme: If using DDR3, format is:
# hw_memory002   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
# hw_nchips      = 4
# prepared_by    = root  (is never output, only tags rawfile)
# sw_file        = ext4
# sw_os001       = Red Hat Enterprise Linux Server release 6.6 (Santiago)
# sw_os002       = 2.6.32-504.12.2.el6.x86_64
# sw_state       = Run level 3 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =LD_LIBRARY_PATH = "/opt/SmartHeap_10mc/lib:/opt/SmartHeap_10mc/lib64:/opt/intel/composer_xe_2013_sp1.3.174/compiler/lib/ia32:/opt/intel/composer_xe_2013_sp1.3.174/compiler/lib/intel64"
notes_010 =