CPU2006 license: | 3175 | Test date: | May-2015 |
---|---|---|---|
Test sponsor: | Huawei | Hardware Availability: | May-2015 |
Tested by: | Huawei | Software Availability: | Sep-2014 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E7-8891 v3 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.50 GHz |
CPU MHz: | 2800 |
FPU: | Integrated |
CPU(s) enabled: | 40 cores, 4 chips, 10 cores/chip |
CPU(s) orderable: | 2,4 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 45 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 1 TB (64 x 16 GB 2Rx4 PC4-2133P-R, running at 1600 MHz) |
Disk Subsystem: | 2 x 300 GB SAS, 10K RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 7.0 (Maipo) 3.10.0-123.el7.x86_64 |
Compiler: | C/C++: Version 15.0.0.090 of Intel C++ Studio XE for Linux |
Auto Parallel: | Yes |
File System: | xfs |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32/64-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V10.0 |
Benchmark | Base | Peak | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||
400.perlbench | 245 | 39.8 | 246 | 39.8 | 245 | 39.9 | 211 | 46.4 | 211 | 46.4 | 211 | 46.3 |
401.bzip2 | 406 | 23.7 | 406 | 23.7 | 408 | 23.6 | 399 | 24.2 | 399 | 24.2 | 399 | 24.2 |
403.gcc | 238 | 33.9 | 238 | 33.9 | 238 | 33.8 | 237 | 34.0 | 237 | 33.9 | 237 | 34.0 |
429.mcf | 164 | 55.6 | 164 | 55.6 | 163 | 55.8 | 162 | 56.2 | 162 | 56.4 | 164 | 55.6 |
445.gobmk | 363 | 28.9 | 362 | 28.9 | 362 | 29.0 | 363 | 28.9 | 362 | 28.9 | 362 | 29.0 |
456.hmmer | 135 | 68.9 | 135 | 69.0 | 136 | 68.8 | 135 | 68.9 | 135 | 69.0 | 136 | 68.8 |
458.sjeng | 355 | 34.0 | 356 | 34.0 | 355 | 34.1 | 353 | 34.3 | 354 | 34.2 | 354 | 34.2 |
462.libquantum | 2.75 | 7530 | 2.75 | 7540 | 2.76 | 7500 | 2.75 | 7530 | 2.75 | 7540 | 2.76 | 7500 |
464.h264ref | 431 | 51.3 | 431 | 51.3 | 435 | 50.9 | 431 | 51.3 | 431 | 51.3 | 435 | 50.9 |
471.omnetpp | 148 | 42.1 | 150 | 41.8 | 149 | 41.9 | 123 | 50.7 | 123 | 50.9 | 123 | 50.6 |
473.astar | 219 | 32.1 | 218 | 32.1 | 218 | 32.2 | 217 | 32.4 | 217 | 32.4 | 217 | 32.3 |
483.xalancbmk | 107 | 64.6 | 108 | 64.2 | 107 | 64.5 | 106 | 65.4 | 106 | 65.4 | 105 | 65.4 |
The config file option 'submit' was used.
Stack size set to unlimited using "ulimit -s unlimited"
BIOS configuration: Set Power Efficiency Mode to Performance Set Lock_step to disabled Baseboard Management Controller used to adjust the fan speed to 100% Set DRAM Maintenace to Manual Set DRAM Maintenace Mode to pTRR Set Patrol Scrub to Enabled Set Hyper Threading to disabled Sysinfo program /spec/config/sysinfo.rev6914 $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 running on rh5885hv3 Mon May 18 05:49:05 2015 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/cpu2006/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E7-8891 v3 @ 2.80GHz 4 "physical id"s (chips) 40 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 10 siblings : 10 physical 0: cores 0 1 2 4 6 8 17 19 20 23 physical 1: cores 0 1 2 4 6 8 17 19 20 23 physical 2: cores 0 1 2 4 6 8 17 19 20 23 physical 3: cores 0 1 2 4 6 8 17 19 20 23 cache size : 46080 KB From /proc/meminfo MemTotal: 1056474292 kB HugePages_Total: 0 Hugepagesize: 2048 kB From /etc/*release* /etc/*version* os-release: NAME="Red Hat Enterprise Linux Server" VERSION="7.0 (Maipo)" ID="rhel" ID_LIKE="fedora" VERSION_ID="7.0" PRETTY_NAME="Red Hat Enterprise Linux Server 7.0 (Maipo)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:redhat:enterprise_linux:7.0:GA:server" redhat-release: Red Hat Enterprise Linux Server release 7.0 (Maipo) system-release: Red Hat Enterprise Linux Server release 7.0 (Maipo) system-release-cpe: cpe:/o:redhat:enterprise_linux:7.0:ga:server uname -a: Linux rh5885hv3 3.10.0-123.el7.x86_64 #1 SMP Mon May 5 11:16:57 EDT 2014 x86_64 x86_64 x86_64 GNU/Linux run-level 3 May 18 05:43 SPEC is set to: /spec Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/rhel-root xfs 342G 20G 323G 6% / Additional information from dmidecode: Warning: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. BIOS American Megatrends Inc. BLISV705 03/30/2015 Memory: 32x NO DIMM NO DIMM 64x Samsung M393A2G40DB0-CPB 16 GB 2 rank 2133 MHz, configured at 1600 MHz (End of data from sysinfo program) Regarding the sysinfo display about the memory installed, the correct amount of memory is 1 TB and the dmidecode description should have two lines reading as: 32x NO DIMM NO DIMM 64x Samsung M393A2G40DB0-CPB 16 GB 2 rank 2133 MHz, configured at 1600 MHz
Environment variables set by runspec before the start of the run: KMP_AFFINITY = "granularity=fine,compact,1,0" LD_LIBRARY_PATH = "/spec/libs/32:/spec/libs/64:/spec/sh" OMP_NUM_THREADS = "40" Binaries compiled on a system with 1x Core i5-4670K CPU + 16GB memory using RedHat EL 7.0 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/transparent_hugepage/enabled runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc>
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
403.gcc: | -DSPEC_CPU_LP64 |
429.mcf: | -DSPEC_CPU_LP64 |
445.gobmk: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX |
464.h264ref: | -DSPEC_CPU_LP64 |
471.omnetpp: | -DSPEC_CPU_LP64 |
473.astar: | -DSPEC_CPU_LP64 |
483.xalancbmk: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX |
-xCORE-AVX2 -ipo -O3 -no-prec-div -parallel -opt-prefetch -auto-p32 |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -Wl,-z,muldefs -L/sh -lsmartheap64 |
icc -m64 | |
400.perlbench: | icc -m32 -L/opt/intel/composer_xe_2015/lib/ia32 |
icpc -m32 -L/opt/intel/composer_xe_2015/lib/ia32 | |
473.astar: | icpc -m64 |
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
401.bzip2: | -DSPEC_CPU_LP64 |
403.gcc: | -DSPEC_CPU_LP64 |
429.mcf: | -DSPEC_CPU_LP64 |
445.gobmk: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX |
464.h264ref: | -DSPEC_CPU_LP64 |
473.astar: | -DSPEC_CPU_LP64 |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -ansi-alias |
401.bzip2: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div -prof-use(pass 2) -auto-ilp32 -opt-prefetch -ansi-alias |
403.gcc: | -xCORE-AVX2 -ipo -O3 -no-prec-div -inline-calloc -opt-malloc-options=3 -auto-ilp32 |
429.mcf: | -xCORE-AVX2 -ipo -O3 -no-prec-div -parallel -opt-prefetch -auto-p32 |
445.gobmk: | basepeak = yes |
456.hmmer: | basepeak = yes |
458.sjeng: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 |
462.libquantum: | basepeak = yes |
464.h264ref: | basepeak = yes |
471.omnetpp: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-ra-region-strategy=block -ansi-alias -Wl,-z,muldefs -L/sh -lsmartheap |
473.astar: | -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -Wl,-z,muldefs -L/sh -lsmartheap64 |
483.xalancbmk: | -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -ansi-alias -Wl,-z,muldefs -L/sh -lsmartheap |