# Invocation command line:
# /spec/cpu2006/v1.2/bin/runspec -c PubOct14H -r fp
# output_root used was "/spec/cpu2006/v1.2/zPubOct14"
############################################################################
# The following line MUST be set to the suite installed path!
%define install_path /spec/cpu2006/v1.2
#######################################################################
#
# SPEC CPU2006 Benchmark Config file IBM Power with Red Hat 7
#
#######################################################################

#%define TestCopies 1
%define 64c8 1
#%define 80c8 1
#%define 24core 1
#%define 20core 1
%define tcmalloc 1
%define libhuge 1

%if defined(%{80c8})
bind= \
  0   8  16  24  32  40  48  56  64  72  80  88  96 104 112 120 128 136 144 152 \
160 168 176 184 192 200 208 216 224 232 240 248 256 264 272 280 288 296 304 312 \
320 328 336 344 352 360 368 376 384 392 400 408 416 424 432 440 448 456 464 472 \
480 488 496 504 512 520 528 536 544 552 560 568 576 584 592 600 608 616 624 632 \
  1   9  17  25  33  41  49  57  65  73  81  89  97 105 113 121 129 137 145 153 \
161 169 177 185 193 201 209 217 225 233 241 249 257 265 273 281 289 297 305 313 \
321 329 337 345 353 361 369 377 385 393 401 409 417 425 433 441 449 457 465 473 \
481 489 497 505 513 521 529 537 545 553 561 569 577 585 593 601 609 617 625 633 \
  2  10  18  26  34  42  50  58  66  74  82  90  98 106 114 122 130 138 146 154 \
162 170 178 186 194 202 210 218 226 234 242 250 258 266 274 282 290 298 306 314 \
322 330 338 346 354 362 370 378 386 394 402 410 418 426 434 442 450 458 466 474 \
482 490 498 506 514 522 530 538 546 554 562 570 578 586 594 602 610 618 626 634 \
  3  11  19  27  35  43  51  59  67  75  83  91  99 107 115 123 131 139 147 155 \
163 171 179 187 195 203 211 219 227 235 243 251 259 267 275 283 291 299 307 315 \
323 331 339 347 355 363 371 379 387 395 403 411 419 427 435 443 451 459 467 475 \
483 491 499 507 515 523 531 539 547 555 563 571 579 587 595 603 611 619 627 635 \
  4  12  20  28  36  44  52  60  68  76  84  92 100 108 116 124 132 140 148 156 \
164 172 180 188 196 204 212 220 228 236 244 252 260 268 276 284 292 300 308 316 \
324 332 340 348 356 364 372 380 388 396 404 412 420 428 436 444 452 460 468 476 \
484 492 500 508 516 524 532 540 548 556 564 572 580 588 596 604 612 620 628 636 \
  5  13  21  29  37  45  53  61  69  77  85  93 101 109 117 125 133 141 149 157 \
165 173 181 189 197 205 213 221 229 237 245 253 261 269 277 285 293 301 309 317 \
325 333 341 349 357 365 373 381 389 397 405 413 421 429 437 445 453 461 469 477 \
485 493 501 509 517 525 533 541 549 557 565 573 581 589 597 605 613 621 629 637 \
  6  14  22  30  38  46  54  62  70  78  86  94 102 110 118 126 134 142 150 158 \
166 174 182 190 198 206 214 222 230 238 246 254 262 270 278 286 294 302 310 318 \
326 334 342 350 358 366 374 382 390 398 406 414 422 430 438 446 454 462 470 478 \
486 494 502 510 518 526 534 542 550 558 566 574 582 590 598 606 614 622 630 638 \
  7  15  23  31  39  47  55  63  71  79  87  95 103 111 119 127 135 143 151 159 \
167 175 183 191 199 207 215 223 231 239 247 255 263 271 279 287 295 303 311 319 \
327 335 343 351 359 367 375 383 391 399 407 415 423 431 439 447 455 463 471 479 \
487 495 503 511 519 527 535 543 551 559 567 575 583 591 599 607 615 623 631 639

%define Copy1  80
%define Copy2 160
%define Copy3 240
%define Copy4 320
%define Copy5 400
%define Copy6 480
%define Copy7 560
%define Copy8 640

hw_avail		= Nov-2014
hw_cpu_mhz              = 4192
hw_cpu_char000		= Intelligent Energy Optimization enabled,
hw_cpu_char001		=  up to 4.458 GHz
hw_model                = IBM Power E870 (4.2 GHz, 80 core, RHEL)
hw_memory               = 4 TB (64 x 64 GB CDIMMs) DDR3 1600 MHz
notes_os_099 		= 64000 16M large pages defined with sysctl command
hw_ncpuorder            = 4,8 Modules
hw_ncores               = 80
hw_ncoresperchip        = 10
hw_nthreadspercore      = 8
hw_nchips               = 8
hw_disk			= 7 x 300 GB 15K RPM SAS SFF-2 Raid5

%elif defined(%{64c8})
bind= \
  0   8  16  24  32  40  48  56  64  72  80  88  96 104 112 120 \
128 136 144 152 160 168 176 184 192 200 208 216 224 232 240 248 \
256 264 272 280 288 296 304 312 320 328 336 344 352 360 368 376 \
384 392 400 408 416 424 432 440 448 456 464 472 480 488 496 504 \
  1   9  17  25  33  41  49  57  65  73  81  89  97 105 113 121 \
129 137 145 153 161 169 177 185 193 201 209 217 225 233 241 249 \
257 265 273 281 289 297 305 313 321 329 337 345 353 361 369 377 \
385 393 401 409 417 425 433 441 449 457 465 473 481 489 497 505 \
  2  10  18  26  34  42  50  58  66  74  82  90  98 106 114 122 \
130 138 146 154 162 170 178 186 194 202 210 218 226 234 242 250 \
258 266 274 282 290 298 306 314 322 330 338 346 354 362 370 378 \
386 394 402 410 418 426 434 442 450 458 466 474 482 490 498 506 \
  3  11  19  27  35  43  51  59  67  75  83  91  99 107 115 123 \
131 139 147 155 163 171 179 187 195 203 211 219 227 235 243 251 \
259 267 275 283 291 299 307 315 323 331 339 347 355 363 371 379 \
387 395 403 411 419 427 435 443 451 459 467 475 483 491 499 507 \
  4  12  20  28  36  44  52  60  68  76  84  92 100 108 116 124 \
132 140 148 156 164 172 180 188 196 204 212 220 228 236 244 252 \
260 268 276 284 292 300 308 316 324 332 340 348 356 364 372 380 \
388 396 404 412 420 428 436 444 452 460 468 476 484 492 500 508 \
  5  13  21  29  37  45  53  61  69  77  85  93 101 109 117 125 \
133 141 149 157 165 173 181 189 197 205 213 221 229 237 245 253 \
261 269 277 285 293 301 309 317 325 333 341 349 357 365 373 381 \
389 397 405 413 421 429 437 445 453 461 469 477 485 493 501 509 \
  6  14  22  30  38  46  54  62  70  78  86  94 102 110 118 126 \
134 142 150 158 166 174 182 190 198 206 214 222 230 238 246 254 \
262 270 278 286 294 302 310 318 326 334 342 350 358 366 374 382 \
390 398 406 414 422 430 438 446 454 462 470 478 486 494 502 510 \
  7  15  23  31  39  47  55  63  71  79  87  95 103 111 119 127 \
135 143 151 159 167 175 183 191 199 207 215 223 231 239 247 255 \
263 271 279 287 295 303 311 319 327 335 343 351 359 367 375 383 \
391 399 407 415 423 431 439 447 455 463 471 479 487 495 503 511

%define Copy1  64
%define Copy2 128
%define Copy3 192
%define Copy4 256
%define Copy5 320
%define Copy6 384
%define Copy7 448
%define Copy8 512

hw_avail		= Nov-2014
hw_cpu_mhz              = 4359
hw_cpu_char000          = Intelligent Energy Optimization enabled,
hw_cpu_char001          =  up to 4.53 GHz
hw_model                = IBM Power E880 (4.35 GHz, 64 core, RHEL)
hw_memory               = 2 TB (64 x 32 GB CDIMMs) DDR3 1600 MHz
notes_os_010            = 51200 16M large pages defined with sysctl command
hw_ncpuorder            = 4,8 Modules
hw_ncores               = 64
hw_ncoresperchip        = 8
hw_nthreadspercore      = 8
hw_nchips               = 8
hw_disk			= 7 x 300 GB 15K RPM SAS SFF-2 Raid5

%elif defined(%{24core})
bind= \
  0   8  16  24  32  40  48  56  64  72  80  88 \
 96 104 112 120 128 136 144 152 160 168 176 184 \
  1   9  17  25  33  41  49  57  65  73  81  89 \
 97 105 113 121 129 137 145 153 161 169 177 185 \
  2  10  18  26  34  42  50  58  66  74  82  90 \
 98 106 114 122 130 138 146 154 162 170 178 186 \
  3  11  19  27  35  43  51  59  67  75  83  91 \
 99 107 115 123 131 139 147 155 163 171 179 187 \
  4  12  20  28  36  44  52  60  68  76  84  92 \
100 108 116 124 132 140 148 156 164 172 180 188 \
  5  13  21  29  37  45  53  61  69  77  85  93 \
101 109 117 125 133 141 149 157 165 173 181 189 \
  6  14  22  30  38  46  54  62  70  78  86  94 \
102 110 118 126 134 142 150 158 166 174 182 190 \
  7  15  23  31  39  47  55  63  71  79  87  95 \
103 111 119 127 135 143 151 159 167 175 183 191

%define Copy1  24
%define Copy2  48
%define Copy3  72
%define Copy4  96
%define Copy5 120
%define Copy6 144
%define Copy7 168
%define Copy8 192

hw_avail		= Jun-2014
hw_cpu_mhz              = 3525
hw_cpu_char000		= Intelligent Energy Optimization enabled,
hw_cpu_char001		=  up to 3.92 GHz
hw_model                = IBM Power S824 (3.5 GHz, 24 core, RHEL)
hw_memory               = 512 GB (16 x 32 GB CDIMMs) DDR3 1600 MHz
notes_os_099 		= 19200 16M large pages defined with sysctl command
hw_ncpuorder            = 2 Modules
hw_ncores               = 24
hw_ncoresperchip        = 6
hw_nthreadspercore      = 8
hw_nchips               = 4
hw_disk			= 5 x 300 GB 15K RPM SAS SFF-2 Raid0

%elif defined(%{20core})
bind= \
  0   8  16  24  32  40  48  56  64  72 \
 80  88  96 104 112 120 128 136 144 152 \
  1   9  17  25  33  41  49  57  65  73 \
 81  89  97 105 113 121 129 137 145 153 \
  2  10  18  26  34  42  50  58  66  74 \
 82  90  98 106 114 122 130 138 146 154 \
  3  11  19  27  35  43  51  59  67  75 \
 83  91  99 107 115 123 131 139 147 155 \
  4  12  20  28  36  44  52  60  68  76 \
 84  92 100 108 116 124 132 140 148 156 \
  5  13  21  29  37  45  53  61  69  77 \
 85  93 101 109 117 125 133 141 149 157 \
  6  14  22  30  38  46  54  62  70  78 \
 86  94 102 110 118 126 134 142 150 158 \
  7  15  23  31  39  47  55  63  71  79 \
 87  95 103 111 119 127 135 143 151 159

%define Copy1  20
%define Copy2  40
%define Copy3  60
%define Copy4  80
%define Copy5 100
%define Copy6 120
%define Copy7 140
%define Copy8 160

hw_avail		= Jun-2014
hw_cpu_mhz              = 3425
hw_cpu_char000		= Intelligent Energy Optimization enabled,
hw_cpu_char001		=  up to 3.73 GHz
hw_model                = IBM Power S822L (3.4 GHz, 20 core, RHEL)
hw_memory               = 512 GB (16 x 32 GB CDIMMs) DDR3 1600 MHz
notes_os_099 		= 16000 16M large pages defined with sysctl command
hw_ncpuorder            = 2 Modules
hw_ncores               = 20
hw_ncoresperchip        = 5
hw_nthreadspercore      = 8
hw_nchips               = 4
hw_disk			= 5 x 300 GB 15K RPM SAS SFF-2 Raid5

%else
%error You MUST specify a system!
%endif

%define Copy %{Copy4}

%ifdef %{cpu}
submit = numactl -l -C %{cpu} $command
%else
submit = numactl -l -C $BIND $command
%endif

%ifndef %{TestCopies}
copies = %{Copy}
%endif

%ifdef %{Sub0}
use_submit_for_speed=1
%endif

parallel_setup =  %{Copy1}
#parallel_setup =  %{Copy}
parallel_setup_type = fork
#parallel_setup_prefork = bindprocessor $$ $BIND
bench_post_setup = sync;echo 3 > /proc/sys/vm/drop_caches
#bench_post_setup = sync
#post_setup = chfs -a freeze=1 /<specfs> ; chfs -a freeze=0 /<specfs>
post_setup = sync;echo 3 > /proc/sys/vm/drop_caches
parallel_test =  1
parallel_test =  %{Copy}
parallel_test_submit = numactl -l -C $BIND $command



#
# To navigate, "export GO=path" and use "ogo" instead of "go"
#              "export OGO_NO_WARN=0" to suppress path msg on every use
#
output_root=${top}/zPubOct14

# Turn off sysinfo, as the sample does not understand AIX anyway.
sysinfo_program =

#======================================================================
# Global Options apply to all runs
#======================================================================
#
# For just a report generated without a raw file or any runs required
# Do a "runspec --reportonly"   (also --action=report or --fakereport)
#
# Just set up the build or run directories, use --buildsetup or --setup
# on the runspec command

# Sets nobuild as the default - you will need -D to force a compile
#nobuild         = 1

# -D forces a build (recompile)
# -N prohibits a build (recompile)


%if '%{md}' eq 'build'
action          = build		# -a
%else
action          = validate	# -a
%endif
tune            = base,peak	# -T
iterations      = 3		# -n
output_format   = txt,csv,html,pdf,cfg	# -o
basepeak        = 0
reportable      = 1		# -l turns off
ignore_errors   = 0		# -I
mean_anyway     = 1
allow_extension_override = 1
ext             = PubOct14H	# -e
size            = test,train,ref # -i



# These are the envionment variables that are set before the run
preenv		= 1
%ifdef %{libhuge}
preENV_HUGETLB_VERBOSE=0
preENV_HUGETLB_MORECORE=yes
# ELFMAP may only be needed for FP
#preENV_HUGETLB_ELFMAP=RW
notes_os_015    = Transparent huge page disabled with
notes_os_020    = echo never > /sys/kernel/mm/transparent_hugepage/enabled
notes_os_025    = sysctl vm.nr_hugepages=N and reboot to set large page pool
%endif
preENV_XLFRTEOPTS=intrinthds=1
# For more information, read the relevant kernel documentation, which is installed in
# /usr/share/doc/kernel-doc-kernel_version/Documentation/vm/hugetlbpage.txt by default.


# Control if the imbedded md5 string of compiler options is checked for
# recompile if the options have changed
%ifdef %{noMD5}
check_md5       = 0
%else
check_md5       = 1
%endif

# Controls if the log file info is echo'd to the screen
teeout          = no

# If 1, make copy of the config file before modifing with MD5
# signitures of the compile options.
backup_config   = 0

# verbose -> -v
#verbose	= 1 to 99, 5 is default, 91 is good for debugging
#verbose	= 1

# Set up how parallel to do the compiles
%ifdef %{make_j}
makeflags       = -j%{make_j}
%endif

#--prevent log file lines that are too long for vi
#  But must be long enough for port_progress to get data
log_line_width  = 180

# Point to where the usr/compiler/OS Flags file is
flagsurl000     = http://www.spec.org/cpu2006/flags/IBM-XL.V13La.xml
flagsurl001     = http://www.spec.org/cpu2006/flags/IBM-Linux-V7.xml

CC_PATH         = /opt/ibm/xlC/13.1.0/bin
CXX_PATH        = /opt/ibm/xlC/13.1.0/bin
XLF_PATH        = /opt/ibm/xlf/15.1.0/bin

#===============================================================================
# How the compilers are called
# The settings used here are for IBM C/C++ and xl Fortran compilers
#===============================================================================
default=default=default=default:

CC      = $(CC_PATH)/xlc_at -qlanglvl=extc99 -qinline=40
CXX     = $(CXX_PATH)/xlC_at -qinline=40
FC      = $(XLF_PATH)/xlf95_at

#===============================================================================
#======================================================================
# Base Level Optimizations
#   No limit to number of flags, must be same for all of each Language.
#======================================================================

%define LPC -qlargepage
%define LPL
%define IPAC -qipa=noobject
%define IPAL -qipa=threads
%define O2  -O2 -qarch=auto -qtune=auto
%define O2V -O2 -qarch=auto -qtune=auto -qsimd
%define O3  -O3 -qarch=auto -qtune=auto
%define O3V -O3 -qarch=auto -qtune=auto -qsimd
%define O4  -O4 -qsimd=noauto
%define O4V -O4
%define O5  -O5 -qsimd=noauto
%define O5V -O5

%ifdef %{tcmalloc}
%define TCMALLOCLIB -ltcmalloc
%else
%define TCMALLOCLIB
%endif

%ifdef %{libhuge}
%define LHBDT  -B/opt/at7.0/share/libhugetlbfs/ -tl -Wl,--hugetlbfs-align
%define LHLIB  -lhugetlbfs
%else
%define LHBDT
%define LHLIB
%endif

# 0x54=84; 0x93=147; 0x36=54
%define DSCRXL
%define DSCRNO -qnoprefetch
%define DSCRx00 -qprefetch=dscr=0x00
%define DSCRx36 -qprefetch=dscr=0x36
%define DSCRx54 -qprefetch=dscr=0x54
%define DSCR84 -qprefetch=dscr=0x54
%define DSCRx93 -qprefetch=dscr=0x93
%define DSCR147 -qprefetch=dscr=0x93
%define DSCR %{DSCRXL}

%define c_suppress
%define cxx_suppress
%define f_suppress -qsuppress=cmpmsg:1500-010
%define ld_suppress -qsuppress=1500-036

EXTRA_CFLAGS   = %{c_suppress}
EXTRA_CXXFLAGS = %{cxx_suppress}
EXTRA_FFLAGS   = %{f_suppress}

OPTIMIZE       = %{LPC} %{IPAC} %{DSCR}

default=base=default=default:
# LDOPT is only good for non FDO builds, so only use for base
EXTRA_LDFLAGS  = %{ld_suppress}
LDOPT          = %{LPL}

int=base=default=default:
sw_base_ptrsize = 32-bit
COPTIMIZE      = %{O5V} -qalias=noansi -qalloca
CXXOPTIMIZE    = %{O5V} -qrtti
EXTRA_CLIBS    = %{LHLIB}
EXTRA_CXXLIBS  = %{TCMALLOCLIB}
LDCFLAGS       = %{IPAL}
LDCXXFLAGS     = %{IPAL}

fp=base=default=default:
sw_base_ptrsize = 32-bit
COPTIMIZE      = %{O5}
CXXOPTIMIZE    = %{O5V} -qrtti
FOPTIMIZE      = %{O5V} -qalias=nostd
LDCFLAGS       = %{IPAL}
LDCXXFLAGS     = %{IPAL}
LDFFLAGS       = %{IPAL}
LDOPT          = %{LHLIB}

#======================================================================
# INT Portability Flags
#     no optimizations allowed here
#======================================================================

400.perlbench=default=default=default:
CPORTABILITY   = -DSPEC_CPU_LINUX_PPC

462.libquantum=default=default=default:
CPORTABILITY   = -DSPEC_CPU_LINUX

464.h264ref=default=default=default:
CPORTABILITY   = -qchars=signed

483.xalancbmk=default=default=default:
CXXPORTABILITY = -DSPEC_CPU_LINUX

#======================================================================
# FP  Portability Flags
#     no optimizations allowed here
#======================================================================

410.bwaves=default=default=default:
FPORTABILITY   = -qfixed

416.gamess=default=default=default:
FPORTABILITY   = -qfixed

434.zeusmp=default=default=default:
FPORTABILITY   = -qfixed

435.gromacs=default=default=default:
FPORTABILITY   = -qfixed -qextname

436.cactusADM=default=default=default:
FPORTABILITY   = -qfixed -qextname

437.leslie3d=default=default=default:
FPORTABILITY   = -qfixed

454.calculix=default=default=default:
FPORTABILITY   = -qfixed -qextname

481.wrf=default=default=default:
CPORTABILITY   = -DNOUNDERSCORE

482.sphinx3=default=default=default:
CPORTABILITY   = -qchars=signed

#======================================================================
#
# Default peak flags.
#
#======================================================================

default=peak=default=default:
sw_peak_ptrsize = 32/64-bit
EXTRA_LDFLAGS  = %{LHLIB} %{LPL} %{ld_suppress}

%define FDPR /opt/bin/fdprpro
%define FDPRCOMP -qfdpr
%define FDPRCLEAN rm -f ${baseexe}.orig ${baseexe}.instr ${baseexe}.nprof
%define Fopt8   -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%define Fopt8a  -O4 -m power8 -A 2 -sls -dir -vrox

#======================================================================
# INT peak Flags
#======================================================================

400.perlbench=peak=default=default:
# C only Benchmark
# Multiple training inputs
%ifndef %{TestCopies}
copies = %{Copy4}
%endif
OPTIMIZE       = %{O3}
COPTIMIZE      = -qalias=noansi
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%ifdef %{64}
CPORTABILITY   += -DSPEC_CPU_LP64
%endif
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_400 = 400.perlbench fdpr options: %{FDPROPTS}
%undef FDPROPTS

401.bzip2=peak=default=default:
# C only Benchmark
# Multiple training inputs
%ifndef %{TestCopies}
copies = %{Copy6}
%endif
OPTIMIZE       = %{O4} %{LPC} %{IPAC}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
LDCFLAGS       = %{IPAL}
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_401 = 401.bzip2 fdpr options: %{FDPROPTS}
%undef FDPROPTS

403.gcc=peak=default=default:
# C only Benchmark
%ifndef %{TestCopies}
copies = %{Copy7}
%endif
%define 64
OPTIMIZE       = %{O4V} -q64 %{LPC} %{IPAC}
COPTIMIZE      = -qalloca
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
LDCFLAGS       = %{IPAL}
%ifdef %{64}
CPORTABILITY   = -DSPEC_CPU_LP64
%endif
%undef 64
%define FDPROPTS %{Fopt8a}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_403 = 403.gcc fdpr options: %{FDPROPTS}
%undef FDPROPTS

429.mcf=peak=default=default:
# C only Benchmark
%ifndef %{TestCopies}
%if defined(%{64c8}) || defined(%{32c8})
copies = %{Copy6}
%else
copies = %{Copy5}
%endif
%endif
OPTIMIZE       = %{O5V} %{LPC} %{IPAC} %{DSCRNO}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
LDCFLAGS       = %{IPAL}
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_429 = 429.mcf fdpr options: %{FDPROPTS}
%undef FDPROPTS

445.gobmk=peak=default=default:
# C only Benchmark
# Multiple training inputs
%ifndef %{TestCopies}
copies = %{Copy8}
%endif
OPTIMIZE       = %{O5V} %{LPC} %{IPAC}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476

456.hmmer=peak=default=default:
# C only Benchmark
%ifndef %{TestCopies}
copies = %{Copy4}
%endif
OPTIMIZE       = %{O5V} %{LPC} %{IPAC} -qassert=refalign
LDCFLAGS       = %{IPAL}
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre1         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run1         = $command
fdo_post1        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_456 = 456.hmmer fdpr options: %{FDPROPTS}
%undef FDPROPTS

458.sjeng=peak=default=default:
# C only Benchmark
%ifndef %{TestCopies}
%if defined(%{80c8})
copies = %{Copy7}
%else
copies = %{Copy8}
%endif
%endif
OPTIMIZE       = %{O3} %{IPAC} %{DSCR84}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_458 = 458.sjeng fdpr options: %{FDPROPTS}
%undef FDPROPTS

462.libquantum=peak=default=default:
# C only Benchmark
%ifndef %{TestCopies}
copies = %{Copy4}
%endif
OPTIMIZE       = %{O5} -qinline=400 -q64 %{LPC} %{IPAC}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_462 = 462.libquantum fdpr options: %{FDPROPTS}
%undef FDPROPTS

464.h264ref=peak=default=default:
# C only Benchmark
%ifndef %{TestCopies}
copies = %{Copy4}
%endif
OPTIMIZE       = %{O5V} %{IPAC}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_464 = 464.h264ref fdpr options: %{FDPROPTS}
%undef FDPROPTS

471.omnetpp=peak=default=default:
# C++ Benchmark
%ifndef %{TestCopies}
%if defined(%{80c8}) || defined(%{64c8}) || defined(%{32c8})
copies = %{Copy8}
%else
copies = %{Copy7}
%endif
%endif
OPTIMIZE       = %{O5} -qarch=pwr7 -qtune=pwr7 %{IPAC} %{DSCR84}
CXXOPTIMIZE    = -qrtti
EXTRA_CXXLIBS  = %{TCMALLOCLIB}
LDCXXFLAGS     = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_471 = 471.omnetpp fdpr options: %{FDPROPTS}
%undef FDPROPTS

473.astar=peak=default=default:
# C++ Benchmark
# Multiple training inputs
%ifndef %{TestCopies}
%if defined(%{80c8}) || defined(%{64c8}) || defined(%{32c8})
copies = %{Copy6}
%else
copies = %{Copy7}
%endif
%endif
OPTIMIZE       = %{O5V} %{LPC} %{IPAC} %{DSCR147}
EXTRA_CXXLIBS  = %{TCMALLOCLIB}
LDCXXFLAGS     = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_473 = 473.astar fdpr options: %{FDPROPTS}
%undef FDPROPTS

483.xalancbmk=peak=default=default:
# C++ Benchmark
%ifndef %{TestCopies}
copies = %{Copy7}
%endif
OPTIMIZE       = %{O3V} %{LPC} %{IPAC} %{DSCR147} -qipa=partition=large
EXTRA_CXXLIBS  = %{TCMALLOCLIB}
LDCXXFLAGS     = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_483 = 483.xalancbmk fdpr options: %{FDPROPTS}
%undef FDPROPTS

999.specrand=peak=default=default:
# C only Benchmark - Must run, but not reported unless fails
%ifndef %{TestCopies}
copies = %{Copy4}
%endif
OPTIMIZE       = %{O5V} %{IPAC}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_999 = 999.specrand fdpr options: %{FDPROPTS}
%undef FDPROPTS


#======================================================================
# FP peak Flags
#======================================================================

410.bwaves=peak=default=default:
# Fortran Benchmark
%ifndef %{TestCopies}
copies = %{Copy1}
%endif
OPTIMIZE       += %{O5}
LDFFLAGS       = %{IPAL}
%ifndef %{64}
FOPTIMIZE      += -qsmallstack=dynlenonheap
%endif
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre1         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run1         = $command
fdo_post1        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_000 = 410.bwaves fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

416.gamess=peak=default=default:
# Fortran Benchmark
%ifndef %{TestCopies}
copies = %{Copy4}
%endif
OPTIMIZE       += %{O5} %{DSCR84} -qipa=partition=large
FOPTIMIZE      = -qalias=nostd
LDFFLAGS       = %{IPAL}
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre1         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run1         = $command
fdo_post1        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_005 = 416.gamess fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

433.milc=peak=default=default:
# C only Benchmark
%ifndef %{TestCopies}
%if defined(%{80c8})
copies = %{Copy3}
%elif defined(%{64c8})
copies = %{Copy6}
%else
copies = %{Copy4}
%endif
%endif
OPTIMIZE       += %{O5}
LDCFLAGS       = %{IPAL}
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre1         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run1         = $command
fdo_post1        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_010 = 433.milc fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

434.zeusmp=peak=default=default:
# Fortran Benchmark
%ifndef %{TestCopies}
%if defined(%{80c8}) || defined(%{64c8}) || defined(%{32c8})
copies = %{Copy4}
%else
copies = %{Copy3}
%endif
%endif
OPTIMIZE       += %{O4} -q64
FOPTIMIZE      = -qxlf90=nosignedzero
LDFFLAGS       = %{IPAL}
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre1         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run1         = $command
fdo_post1        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_015 = 434.zeusmp fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

435.gromacs=peak=default=default:
# Fortran & C Benchmark
%ifndef %{TestCopies}
copies = %{Copy4}
%endif
OPTIMIZE       += %{O4V} -qipa=partition=large
LDFFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_FFLAGS   = -qpdf1
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_020 = 435.gromacs fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

436.cactusADM=peak=default=default:
# Fortran & C Benchmark
%ifndef %{TestCopies}
%if defined(%{64c8}) || defined(%{32c8})
copies = %{Copy4}
%else
copies = %{Copy3}
%endif
%endif
%define 64
OPTIMIZE       += %{O4V} -qarch=pwr7 -qtune=pwr7 -qipa=partition=large
LDFFLAGS       = %{IPAL}
%ifdef %{64}
# FPPPORTABILITY not needed because CPORTABILITY also added to specpp command
# FPPPORTABILITY += -DSPEC_CPU_LP64
CPORTABILITY   += -DSPEC_CPU_LP64
OPTIMIZE       += -q64
%endif
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_FFLAGS   = -qpdf1
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%undef 64
%define FDPROPTS %{Fopt8a}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_025 = 436.cactusADM fdpr options: -O4 -m power8 -A 2 -sls -dir -vrox
%undef FDPROPTS


437.leslie3d=peak=default=default:
# Fortran Benchmark
%ifndef %{TestCopies}
%if defined(%{64c8}) || defined(%{32c8})
copies = %{Copy3}
%elif defined(%{80c8})
copies = %{Copy2}
%else
copies = %{Copy1}
%endif
%endif
OPTIMIZE       += %{O5V} -q64
LDFFLAGS       = %{IPAL}
EXTRA_LIBS     = %{LHBDT}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_030 = 437.leslie3d fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

444.namd=peak=default=default:
# C++ Benchmark
%ifndef %{TestCopies}
%if defined(%{80c8}) || defined(%{64c8}) || defined(%{32c8})
copies = %{Copy4}
%else
copies = %{Copy8}
%endif
%endif
OPTIMIZE       += %{O4V}
LDCXXFLAGS     = %{IPAL}
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre1         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run1         = $command
fdo_post1        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_035 = 444.namd fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

447.dealII=peak=default=default:
# C++ Benchmark
%ifndef %{TestCopies}
%if defined(%{64c8}) || defined(%{32c8})
copies = %{Copy6}
%else
copies = %{Copy7}
%endif
%endif
OPTIMIZE       += %{O4V}
CXXOPTIMIZE    = -qrtti
LDCXXFLAGS     = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_040 = 447.dealII fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

450.soplex=peak=default=default:
# C++ Benchmark
# Multiple training inputs
%ifndef %{TestCopies}
%if defined(%{80c8}) || defined(%{64c8}) || defined(%{32c8})
copies = %{Copy4}
%else
copies = %{Copy7}
%endif
%endif
OPTIMIZE       += %{O3V} %{DSCRNO}
LDCXXFLAGS     = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476

453.povray=peak=default=default:
# C++ Benchmark
%ifndef %{TestCopies}
copies = %{Copy8}
%endif
OPTIMIZE       += %{O3} %{DSCR147}
LDCXXFLAGS     = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_045 = 453.povray fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

454.calculix=peak=default=default:
# Fortran & C Benchmark
%ifndef %{TestCopies}
copies = %{Copy4}
%endif
OPTIMIZE       = %{O5}
LDFFLAGS       = %{IPAL}
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre1         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run1         = $command
fdo_post1        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_050 = 454.calculix fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

459.GemsFDTD=peak=default=default:
# Fortran Benchmark
%ifndef %{TestCopies}
%if defined(%{80c8}) || defined(%{64c8}) || defined(%{32c8})
copies = %{Copy8}
%else
copies = %{Copy2}
%endif
%endif
OPTIMIZE       += %{O5V} -q64 -qipa=partition=large
LDFFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8a}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_055 = 459.GemsFDTD fdpr options: -O4 -m power8 -A 2 -sls -dir -vrox
%undef FDPROPTS

465.tonto=peak=default=default:
# Fortran Benchmark
%ifndef %{TestCopies}
%if defined(%{80c8}) || defined(%{64c8}) || defined(%{32c8})
copies = %{Copy4}
%else
copies = %{Copy6}
%endif
%endif
OPTIMIZE       += %{O5V} -q64 -qipa=partition=large
LDFFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8a}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_060 = 465.tonto fdpr options: -O4 -m power8 -A 2 -sls -dir -vrox
%undef FDPROPTS

470.lbm=peak=default=default:
# C Benchmark
%ifndef %{TestCopies}
copies = %{Copy1}
%endif
OPTIMIZE       += %{O5} -q64
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_065 = 470.lbm fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

481.wrf=peak=default=default:
# Fortran & C-for netCDF Benchmark
%ifndef %{TestCopies}
copies = %{Copy4}
%endif
OPTIMIZE       += %{O5V} -qipa=partition=large
LDFFLAGS       = %{IPAL}
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_070 = 481.wrf fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

482.sphinx3=peak=default=default:
# C only Benchmark
%ifndef %{TestCopies}
%if defined(%{80c8}) || defined(%{64c8}) || defined(%{32c8})
copies = %{Copy6}
%else
copies = %{Copy2}
%endif
%endif
OPTIMIZE       += %{O5}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf; %{FDPRCLEAN}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2 -qsuppress=1586-476
%define FDPROPTS %{Fopt8}
OPTIMIZE        += %{FDPRCOMP}
EXTRA_LDFLAGS   += -Wl,-q
fdo_pre2         = cp -p ${baseexe} ${baseexe}.orig ; %{FDPR} -a instr %{FDPROPTS} ${baseexe}; cp -p ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp -p ${baseexe}.orig ${baseexe} ; %{FDPR} -a opt -f ${baseexe}.nprof  %{FDPROPTS} ${baseexe} ; mv ${baseexe}.fdpr ${baseexe}
notes_peak_fdpr_075 = 482.sphinx3 fdpr options: -O4 -m power8 -A 2 -rcl 2 -sls -dir -vrox
%undef FDPROPTS

998.specrand=peak=default=default:
# C only Benchmark - Must run, but not reported unless fails
%ifndef %{TestCopies}
copies = %{Copy2}
%endif
OPTIMIZE       += %{O5}
LDCFLAGS       = %{IPAL}

#===============================================================================
# Report requirements
#===============================================================================
default=default=default=default:
notes_submit_000        = The config file option 'submit' was used
notes_submit_005        = to assign benchmark copy to specific kernel thread using
notes_submit_010        = the "numactl" command (see flags file for details).


license_num		= 11
test_sponsor		= IBM Corporation
tester			= IBM Corporation
hw_vendor		= IBM Corporation

hw_other		= None

hw_fpu			= Integrated
hw_pcache		= 32 KB I + 64 KB D on chip per core
hw_scache		= 512 KB I+D on chip per core
hw_tcache		= 8 MB I+D on chip per core
hw_ocache		= 16 MB I+D off chip per CDIMM

hw_cpu_name             = POWER8

sw_file			= xfs
#sw_file		= ext4
sw_state		= Run level 3 (multi-user)

sw_avail		= Jun-2014
sw_os000                = Red Hat Enterprise Linux Server release 7.0
sw_os001                = (ppc64) kernel 3.10.0-123.el7.ppc64
sw_other000             = Post-Link Optimization for Linux on
sw_other001             =           POWER, version 5.7.0
sw_other002             = IBM Advance Toolchain 7.0-3
int=default=default=default:
sw_compiler00           = C/C++: Version 13.1 of IBM XL C/C++ for Linux
fp=default=default=default:
sw_compiler000          = C/C++: Version 13.1 of IBM XL C/C++ for Linux;
sw_compiler001          = Fortran: Version 15.1 of IBM XL Fortran for Linux
#sw_other010		= Apache C++ Standard Library V4.2.1
#notes_os_030		=  The Apache C++ Standard Library V4.2.1 was installed from
#notes_os_035		=  http://stdcxx.apache.org/download.html using:
#notes_os_040		=  gmake BUILDTYPE=8d CONFIG=gcc.config
#notes_os_045		=
#
default=default=default=default:

notes_os_000 = ulimit -s (stack) set to unlimited
notes_os_005 =




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =HUGETLB_MORECORE = "yes"
notes_010 =HUGETLB_VERBOSE = "0"
notes_015 =XLFRTEOPTS = "intrinthds=1"
notes_020 =This result uses the post_setup and/or bench_post_setup to drop caches. SPEC has
notes_025 =determined that although the effect may have been negligible for this run, future
notes_030 =submissions will not be considered rule compliant if the post_setup actions drop
notes_035 =caches (e.g. : "echo 3 > /proc/sys/vm/drop_caches").