# Invocation command line: # /opt/cpu2006/bin/runspec --define invoke_with_interleave --define external -c cpu2006.1.2.ic14.0.linux64.sse42.speed.15aug2013 --define cores=20 --define THP_enabled -o all --define THP_enabled -o all int # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 13.1 # Operating system version: 64-Bit RedHat Enterprise Linux64 6.4 # Hardware: Intel processors supporting SSE4.2 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # Aug 2012 Intel Compiler 13.1 for Linux64 ############################################################################ action = validate tune = base,peak # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## % define version 15aug2013 ext = cpu2006.1.2.ic14.0.linux64.sse42.speed.%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # PATHSEP = / check_md5=1 reportable=1 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6818 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic14.0-official-linux64.20140128.xml %ifdef %{external} flagsurl001=http://www.spec.org/cpu2006/flags/Cisco-Platform-Settings-V1.2-revB.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh preENV_OMP_NUM_THREADS = %{cores} %ifdef %{intspeed} preENV_KMP_AFFINITY = granularity=fine,scatter %else preENV_KMP_AFFINITY = granularity=fine,compact,1,0 %endif # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = /sh SMARTHEAP64_DIR = /sh fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xSSE4.2 FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ ################################################################ # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language ################################################################ 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -auto-p32 fp=base=default=default: FOPTIMIZE= $(FAST) -parallel -opt-prefetch COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias CXXOPTIMIZE= $(FAST) -opt-prefetch -ansi-alias ################################################################ # Peak Tuning Flags int 2005 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: CC= icc -m32 PORTABILITY= CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -opt-prefetch -ansi-alias 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -opt-prefetch -no-prec-div -ansi-alias 403.gcc=peak=default: COPTIMIZE= $(FASTNOSTATIC) -inline-calloc -opt-malloc-options=3 -auto-ilp32 feedback=0 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: CC= icc -m32 PORTABILITY= COPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 -ansi-alias feedback=0 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: CC= icc -m32 PORTABILITY= COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXX= icpc -m32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= CXXOPTIMIZE= -opt-ra-region-strategy=block -ansi-alias 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: CXX= icpc -m32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -ansi-alias feedback=no ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -auto-ilp32 -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: basepeak=yes 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: OPTIMIZE= 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: OPTIMIZE= $(FASTNOSTATIC) feedback=0 459.GemsFDTD=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -opt-prefetch -parallel 465.tonto=peak=default: OPTIMIZE= -inline-calloc -opt-malloc-options=3 -auto -unroll4 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: OPTIMIZE= $(FASTNOSTATIC) COPTIMIZE= -unroll2 -ansi-alias -parallel feedback=no ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 9019 test_sponsor = Cisco Systems hw_avail = May-2014 sw_avail = Sep-2013 tester = Cisco Systems hw_cpu_name = Intel Trademarked CPU Name hw_cpu_char =Intel Turbo Boost Technology up to 2.70 GHz hw_cpu_mhz = 2200 hw_disk = 1000 GB SATA, 9999RPM hw_fpu = Integrated hw_memory000 = 256 GB (32 x 8 GB 2Rx4 PC3-12800R-11, ECC, hw_model = Cisco UCS B260 M4 (Intel Xeon E7-4830 v2 2.20GHz) hw_ncpuorder = 1,2 chip hw_ncores = 20 hw_nchips = 9999 hw_ncoresperchip = 10 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None hw_vendor = Cisco Systems prepared_by = Anirudha Rahatekar sw_file = ReiserFS sw_os001 = RedHat EL 6.4 sw_state = Run level 3 (multi-user) notes_025 = Binaries compiled on a system with 1x Core i7-860 CPU + 8GB notes_030 = memory using RedHat EL 6.4 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" int=default=default=default: sw_compiler000 = C/C++: Version 14.0.0.080 of Intel C++ Studio XE sw_compiler001 = for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other = Microquill SmartHeap V10.0 default: %ifdef %{THP_enabled} notes_035 = Transparent Huge Pages enabled with: notes_040 = echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_045 = runspec command invoked through numactl i.e.: notes_050 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler001 = C/C++: Version 14.0.0.080 of Intel C++ Studio XE sw_compiler002 = for Linux; sw_compiler004 = Fortran: Version 14.0.0.080 of Intel Fortran sw_compiler005 = Studio XE for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6818' default: notes_plat_sysinfo_000 = Sysinfo program /opt/cpu2006/config/sysinfo.rev6818 notes_plat_sysinfo_005 = $Rev: 6818 $ $Date:: 2012-07-17 #$ e86d102572650a6e4d596a3cee98f191 notes_plat_sysinfo_010 = running on b260m4 Sun Oct 12 23:56:14 2014 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E7-4830 v2 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 40 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 10 notes_plat_sysinfo_080 = siblings : 20 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 notes_plat_sysinfo_095 = cache size : 20480 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 263806728 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = Red Hat Enterprise Linux Server release 6.5 (Santiago) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = redhat-release: Red Hat Enterprise Linux Server release 6.5 (Santiago) notes_plat_sysinfo_155 = system-release: Red Hat Enterprise Linux Server release 6.5 (Santiago) notes_plat_sysinfo_160 = system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server notes_plat_sysinfo_165 = notes_plat_sysinfo_170 = uname -a: notes_plat_sysinfo_175 = Linux b260m4 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 notes_plat_sysinfo_180 = x86_64 x86_64 GNU/Linux notes_plat_sysinfo_185 = notes_plat_sysinfo_190 = run-level 3 Oct 12 23:54 notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /opt/cpu2006 notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_210 = /dev/sda1 ext4 91G 47G 40G 55% / notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = Additional information from dmidecode: notes_plat_sysinfo_225 = BIOS Cisco Systems, Inc. EXM4-1.2.2.2.0.042820141805 04/28/2014 notes_plat_sysinfo_230 = Memory: notes_plat_sysinfo_235 = 32x 8 GB notes_plat_sysinfo_240 = 32x 0xCE00 M393B1K70QB0-YK0 8 GB 1066 MHz 2 rank notes_plat_sysinfo_245 = 16x NO DIMM NO DIMM notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E7-4830 v2 hw_disk = 1 X 100 GB SATA SSD hw_memory001 = running at 1066 MHz and CL11) hw_nchips = 2 prepared_by = Sheshgiri I (shei@cisco.com) sw_file = ext4 sw_os000 = Red Hat Enterprise Linux Server release 6.5 sw_os001 = (Santiago) sw_os002 = 2.6.32-431.el6.x86_64 sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_010 =LD_LIBRARY_PATH = "/opt/cpu2006/libs/32:/opt/cpu2006/libs/64:/opt/cpu2006/sh" notes_015 =OMP_NUM_THREADS = "20" notes_020 = notes_plat_000 =Intel HT Technology = Enabled notes_plat_005 =CPU performance set to HPC notes_plat_010 =Power Technology set to Custom notes_plat_015 =CPU Power State C6 set to Disabled notes_plat_020 =CPU Power State C1 Enhanced set to Disabled notes_plat_025 =Memory RAS configuration set to Maximum Performance notes_plat_030 =DRAM Clock Throttling Set to Performance