# Invocation command line:
# /home/SPECcpu-new/bin/runspec --define invoke_with_interleave --define external -c cpu2006.1.2.ic14.0.linux64.sse42.speed.15aug2013 --define cores=2 --define THP_enabled -o all --define intspeed int
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       Intel Compiler 13.1
#      Operating system version:    64-Bit RedHat Enterprise Linux64 6.4
#      Hardware:                    Intel processors supporting SSE4.2
#
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# Aug 2012 Intel Compiler 13.1 for Linux64
############################################################################
action      = validate
tune        = base,peak

     #
     ########################################################
     #         ATTENTION     ATTENTION     ATTENTION
     ########################################################
     #
     #     NOTE If you change fail_build then PLEASE also
     #     change the line 'define version', because
     #     SPEC review tools use 'ext' to track binaries.
     #
     ########################################################
%    define version 15aug2013
     ext         = cpu2006.1.2.ic14.0.linux64.sse42.speed.%{version}
     #
     # vvvvvvvvvvvv # do not change unless you read NOTE above
       fail_build=1 # do not change unless you read NOTE above
     # ^^^^^^^^^^^^ # do not change unless you read NOTE above
     #
     ########################################################
     #

PATHSEP     = /
check_md5=1
reportable=1
mean_anyway=1
sysinfo_program = specperl $[top]/config/sysinfo.rev6818 -f

flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic14.0-official-linux64.20140128.xml
flagsurl001 = http://www.spec.org/cpu2006/flags/IBM-Platform-Flags-V1.2-HSW-A.xml
%ifdef %{external}
%endif

# Set some environment variables
preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh

preENV_OMP_NUM_THREADS = %{cores}

%ifdef %{intspeed}
preENV_KMP_AFFINITY    = granularity=fine,scatter
%else
preENV_KMP_AFFINITY    = granularity=fine,compact,1,0
%endif

#
# These are listed as benchmark-tuning-extension-machine
#

int=default=default=default:
CC=  icc  -m64
CXX= icpc -m64
OBJ = .o
SMARTHEAP32_DIR = /sh
SMARTHEAP64_DIR = /sh


fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

####################################################################
# Compiler options
# for Nehalem use -xSSE4.2
# for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3
####################################################################
default:
SSE          =  -xSSE4.2
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div
FAST         =  $(SSE) -ipo -O3 -no-prec-div
################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################
default:
PORTABILITY = -DSPEC_CPU_LP64

400.perlbench=default:
CPORTABILITY  = -DSPEC_CPU_LINUX_X64

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY= -DSPEC_CPU_LINUX

483.xalancbmk=default=default=default:
CXXPORTABILITY= -DSPEC_CPU_LINUX

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

################################################################
# Tuning Flags
################################################################


################################################################
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same
# flags are used in the same order for all benchmarks of a given language
################################################################
471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP64_DIR) -lsmartheap64
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=   $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32
CXXOPTIMIZE= $(FASTNOSTATIC)           -opt-prefetch -auto-p32

fp=base=default=default:
FOPTIMIZE=    $(FAST) -parallel -opt-prefetch
COPTIMIZE=    $(FAST) -parallel -opt-prefetch -ansi-alias
CXXOPTIMIZE=  $(FAST)           -opt-prefetch -ansi-alias

################################################################
# Peak Tuning Flags int 2005 fast
################################################################
int=peak=default:
COPTIMIZE=       -auto-ilp32  -ansi-alias
CXXOPTIMIZE=     -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = -prof-gen
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
CC= icc -m32
PORTABILITY=
CPORTABILITY  = -DSPEC_CPU_LINUX_IA32
COPTIMIZE= -opt-prefetch -ansi-alias

401.bzip2=peak=default:
COPTIMIZE= -auto-ilp32 -opt-prefetch -no-prec-div -ansi-alias

403.gcc=peak=default:
COPTIMIZE= $(FASTNOSTATIC) -inline-calloc -opt-malloc-options=3 -auto-ilp32
feedback=0

429.mcf=peak=default:
basepeak=yes

445.gobmk=peak=default:
CC= icc -m32
PORTABILITY=
COPTIMIZE=       -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
COPTIMIZE= $(FASTNOSTATIC)  -unroll2 -auto-ilp32  -ansi-alias
feedback=0

458.sjeng=peak=default:
COPTIMIZE= -unroll4

462.libquantum=peak=default:
basepeak=yes

464.h264ref=peak=default:
CC= icc -m32
PORTABILITY=
COPTIMIZE= -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXX= icpc -m32
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
PORTABILITY=
CXXOPTIMIZE= -opt-ra-region-strategy=block -ansi-alias

473.astar=peak=default:
basepeak=yes

483.xalancbmk=peak=default:
CXX= icpc -m32
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
PORTABILITY=
CXXOPTIMIZE= $(FASTNOSTATIC)   -opt-prefetch -ansi-alias
feedback=no

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32 -ansi-alias
CXXOPTIMIZE=     -auto-ilp32 -ansi-alias
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  $(FASTNOSTATIC) -prof-use

410.bwaves=peak=default:
basepeak=yes

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep-

433.milc=peak=default:
OPTIMIZE=

434.zeusmp=peak=default:
basepeak=yes

435.gromacs=peak=default:
basepeak=yes

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
basepeak=yes

444.namd=peak=default:
OPTIMIZE= -fno-alias
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
basepeak=yes

450.soplex=peak=default:
basepeak=yes

453.povray=peak=default:
CXXOPTIMIZE= -unroll4 -ansi-alias

454.calculix=peak=default:
OPTIMIZE= $(FASTNOSTATIC)
feedback=0

459.GemsFDTD=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -opt-prefetch -parallel

465.tonto=peak=default:
OPTIMIZE=  -inline-calloc -opt-malloc-options=3 -auto -unroll4

470.lbm=peak=default:
basepeak=yes

481.wrf=peak=default:
basepeak=yes

482.sphinx3=peak=default:
OPTIMIZE= $(FASTNOSTATIC)
COPTIMIZE= -unroll2 -ansi-alias -parallel
feedback=no

#################################################################
# (Edit this to match your system)
#################################################################

#include: ibm_sut.inc
#  ----- Begin inclusion of 'ibm_sut.inc'
############################################################################
#include: ibm_x3250M5_mem1333.inc
#  ----- Begin inclusion of 'ibm_x3250M5_mem1333.inc'
############################################################################
int,fp=default=default=default:
license_num      = 11
test_sponsor     = IBM Corporation
hw_avail         = Dec-2013
sw_avail         = Sep-2013
tester           = IBM Corporation
hw_disk          = 1 x 1 TB SATA, 7200 RPM
hw_memory000     = 16 GB (2 x 8 GB 2Rx8 PC3-12800E-11, ECC, running
hw_memory001 = at 1333 MHz)
hw_model000      = IBM System x3250 M5
hw_vendor        = IBM Corporation
prepared_by      = IBM Corporation
sw_file          = ext4
sw_os000         = Red Hat Enterprise Linux Server release 6.4
sw_os001 = (Santiago)
sw_os002         = 2.6.32-358.el6.x86_64
sw_state         = Run level 3 (multi-user)
notes_plat_form_000 = BIOS setting:
notes_plat_form_005 = Operating Mode set to Maximum Performance
#notes_plat_form_005 = Operating Mode set to Custom
#notes_palt_form_010 = Turbo Mode enabled in BIOS
#notes_plat_form_015 = C-State enabled in BIOS

# ---- End inclusion of '/home/SPECcpu-new/config/ibm_x3250M5_mem1333.inc'
#include: ibm_G3220.inc
#  ----- Begin inclusion of 'ibm_G3220.inc'
############################################################################
int,fp=default=default=default:
hw_cpu_name      = Intel Pentium G3220
hw_cpu_char      =
hw_cpu_mhz       = 3000
hw_model001      = (Intel Pentium G3220, 3.00 GHz)
hw_ncpuorder     = 1 chip
hw_ncores        = 2
hw_nchips        = 1
hw_ncoresperchip = 2
hw_nthreadspercore = 1
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 3 MB I+D on chip per chip

# ---- End inclusion of '/home/SPECcpu-new/config/ibm_G3220.inc'

# ---- End inclusion of '/home/SPECcpu-new/config/ibm_sut.inc'

default=default=default=default:
license_num      = 13
test_sponsor     = Intel Corporation
hw_avail         = Dec-2010
sw_avail         = Sep-2013
tester           = Intel Corporation
hw_cpu_name      = Intel Trademarked CPU Name
hw_cpu_char      =
hw_cpu_mhz       = 3000
hw_disk          = 1000 GB SATA, 9999RPM
hw_fpu           = Integrated
hw_memory        = 9999 GB
#hw_model         = System Model Name
hw_ncpuorder     = 9999 chip
hw_ncores        = 9999
hw_nchips        = 9999
hw_ncoresperchip = 9999
hw_nthreadspercore = 9999
hw_other         = None
hw_pcache        = 9999 KB I + 9999 KB D on chip per core
hw_scache        = 9999 MB I+D on chip per core
hw_tcache        = None
hw_ocache        = None
hw_vendor        = Intel Corporation
prepared_by      = Anirudha Rahatekar
sw_file          = ReiserFS
sw_os001         = RedHat EL 6.4
sw_state         = Run level 3 (multi-user)
notes_025        = Binaries compiled on a system with 1x Core i7-860 CPU + 8GB
notes_030        = memory using RedHat EL 6.4
notes_os_000     = Stack size set to unlimited using "ulimit -s unlimited"

int=default=default=default:
sw_compiler000   = C/C++: Version 14.0.0.080 of Intel C++ Studio XE
sw_compiler001   = for Linux
sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other         = Microquill SmartHeap V10.0

default:
%ifdef %{THP_enabled}
notes_035        = Transparent Huge Pages enabled with:
notes_040        = echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled
%endif

%ifdef %{THP_disabled}
notes_200        = Transparent Huge Pages disabled with:
notes_201        = echo never  > /sys/kernel/mm/redhat_transparent_hugepage/enabled
%endif

%ifdef %{drop_caches}
notes_202        = Filesystem page cache cleared with:
notes_203        = echo 1>       /proc/sys/vm/drop_caches
%endif

%ifdef %{invoke_with_interleave}
notes_045        = runspec command invoked through numactl i.e.:
notes_050        = numactl --interleave=all runspec <etc>
%endif

fp=default=default=default:
sw_compiler001   = C/C++: Version 14.0.0.080 of Intel C++ Studio XE
sw_compiler002   = for Linux;
sw_compiler004   = Fortran: Version 14.0.0.080 of Intel Fortran
sw_compiler005   = Studio XE for Linux
sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 32/64-bit


# The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6818 -f'
default:
notes_plat_sysinfo_000 = Sysinfo program /home/SPECcpu-new/config/sysinfo.rev6818
notes_plat_sysinfo_005 = $Rev: 6818 $ $Date:: 2012-07-17 #$ e86d102572650a6e4d596a3cee98f191
notes_plat_sysinfo_010 = running on x3250M5 Fri Mar 28 02:44:27 2014
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/cpu2006/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Pentium(R) CPU G3220 @ 3.00GHz
notes_plat_sysinfo_050 =       1 "physical id"s (chips)
notes_plat_sysinfo_055 =       2 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 2
notes_plat_sysinfo_080 =       siblings  : 2
notes_plat_sysinfo_085 =       physical 0: cores 0 1
notes_plat_sysinfo_090 =    cache size : 3072 KB
notes_plat_sysinfo_095 =
notes_plat_sysinfo_100 = From /proc/meminfo
notes_plat_sysinfo_105 =    MemTotal:       16299404 kB
notes_plat_sysinfo_110 =    HugePages_Total:       0
notes_plat_sysinfo_115 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_120 =
notes_plat_sysinfo_125 = /usr/bin/lsb_release -d
notes_plat_sysinfo_130 =    Red Hat Enterprise Linux Server release 6.4 (Santiago)
notes_plat_sysinfo_135 =
notes_plat_sysinfo_140 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_145 =    redhat-release: Red Hat Enterprise Linux Server release 6.4 (Santiago)
notes_plat_sysinfo_150 =    system-release: Red Hat Enterprise Linux Server release 6.4 (Santiago)
notes_plat_sysinfo_155 =    system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server
notes_plat_sysinfo_160 =
notes_plat_sysinfo_165 = uname -a:
notes_plat_sysinfo_170 =    Linux x3250M5 2.6.32-358.el6.x86_64 #1 SMP Tue Jan 29 11:47:41 EST 2013
notes_plat_sysinfo_175 =    x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_180 =
notes_plat_sysinfo_185 = run-level 3 Mar 27 11:05
notes_plat_sysinfo_190 =
notes_plat_sysinfo_195 = SPEC is set to: /home/SPECcpu-new
notes_plat_sysinfo_200 =    Filesystem    Type    Size  Used Avail Use% Mounted on
notes_plat_sysinfo_205 =    /dev/mapper/vg_x3250m5-lv_home
notes_plat_sysinfo_210 =                  ext4    852G   19G  790G   3% /home
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = Additional information from dmidecode:
notes_plat_sysinfo_225 =   BIOS IBM -[JUE109OUS-1.00]- 11/20/2013
notes_plat_sysinfo_230 =   Memory:
notes_plat_sysinfo_235 =    2x Micron 18KSF1G72AZ-1G6E1 8 GB 1333 MHz 2 rank
notes_plat_sysinfo_240 =    2x Not Specified Not Specified
notes_plat_sysinfo_245 =
notes_plat_sysinfo_250 = (End of data from sysinfo program)
# hw_cpu_name    = Intel Pentium G3220
# hw_disk        = 852 GB  add more disk info here
# hw_memory001   = 15.544 GB fixme: If using DDR3, format is:
# hw_memory002   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
# hw_nchips      = 1
# prepared_by    = root  (is never output, only tags rawfile)
# sw_file        = ext4
# sw_os001       = Red Hat Enterprise Linux Server release 6.4 (Santiago)
# sw_os002       = 2.6.32-358.el6.x86_64
# sw_state       = Run level 3 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =KMP_AFFINITY = "granularity=fine,scatter"
notes_010 =LD_LIBRARY_PATH = "/home/SPECcpu-new/libs/32:/home/SPECcpu-new/libs/64:/home/SPECcpu-new/sh"
notes_015 =OMP_NUM_THREADS = "2"
notes_020 =
notes_plat_update_000 ="Not Specified" memory information from dmidecode indicates unused DIMM slots.