# Invocation command line:
# /SPECcpu2006/bin/runspec --define invoke_with_interleave -c cpu2006.1.2.ic14.0.linux64.avx.speed.cfg --define cores=12 --define THP_enabled -o all int
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       Intel Compiler 13.1
#      Operating system version:    64-Bit RedHat Enterprise Linux64 6.4
#      Hardware:                    Intel processors supporting AVX
#
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# Aug 2012 Intel Compiler 13.1 for Linux64
############################################################################
action      = validate
tune        = base,peak
%define version 15aug2013
ext         = cpu2006.1.2.ic14.0.linux64.avx.speed.%{version}
#####################################################################################
# You can't change the line with fail_build=1 without changing the line ext=
# to reflect the data on which you re-built the binaries.
# In addition, the sw_compiler lines below, must be modified to match the description
# of the compiler being used to build the binaries
#####################################################################################
fail_build=1
PATHSEP     = /
check_md5=1
reportable=1
mean_anyway=1
sysinfo_program = specperl $[top]/config/sysinfo.rev6818 -p -f
use_submit_for_speed=1

flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic14.0-official-linux64.20140128.xml
flagsurl001=http://www.spec.org/cpu2006/flags/Fujitsu-Platform.20130924.xml

# Set some environment variables
preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh

preENV_OMP_NUM_THREADS = %{cores}

preENV_KMP_AFFINITY    = granularity=fine,compact,1,0

#
# These are listed as benchmark-tuning-extension-machine
#

int=default=default=default:
CC=  icc  -m64
CXX= icpc -m64
OBJ = .o
SMARTHEAP32_DIR = /sh
SMARTHEAP64_DIR = /sh


fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

####################################################################
# Compiler options
# for Nehalem use -xSSE4.2
# for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3
####################################################################
default:
SSE          =  -xAVX
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div
FAST         =  $(SSE) -ipo -O3 -no-prec-div
################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################
default:
PORTABILITY = -DSPEC_CPU_LP64

400.perlbench=default:
CPORTABILITY  = -DSPEC_CPU_LINUX_X64

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY= -DSPEC_CPU_LINUX

483.xalancbmk=default=default=default:
CXXPORTABILITY= -DSPEC_CPU_LINUX

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

################################################################
# Tuning Flags
################################################################


################################################################
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same
# flags are used in the same order for all benchmarks of a given language
################################################################
471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP64_DIR) -lsmartheap64
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=   $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32
CXXOPTIMIZE= $(FASTNOSTATIC)           -opt-prefetch -auto-p32

fp=base=default=default:
FOPTIMIZE=    $(FAST) -parallel -opt-prefetch
COPTIMIZE=    $(FAST) -parallel -opt-prefetch -ansi-alias
CXXOPTIMIZE=  $(FAST)           -opt-prefetch -ansi-alias

################################################################
# Peak Tuning Flags int 2005 fast
################################################################
int=peak=default:
COPTIMIZE=       -auto-ilp32  -ansi-alias
CXXOPTIMIZE=     -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = -prof-gen
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench,401.bzip2,429.mcf,445.gobmk,458.sjeng,464.h264ref,471.omnetpp,473.astar,483.xalancbmk=peak:
submit       = taskset -c $SPECCOPYNUM $command

400.perlbench=peak=default:
CC= icc -m32
PORTABILITY=
CPORTABILITY  = -DSPEC_CPU_LINUX_IA32
COPTIMIZE= -opt-prefetch -ansi-alias

401.bzip2=peak=default:
COPTIMIZE= -auto-ilp32 -opt-prefetch -no-prec-div -ansi-alias

403.gcc=peak=default:
COPTIMIZE= $(FASTNOSTATIC) -inline-calloc -opt-malloc-options=3 -auto-ilp32
feedback=0

429.mcf=peak=default:
COPTIMIZE=   $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32
feedback=0
submit       = taskset -c $SPECCOPYNUM $command
basepeak=yes

445.gobmk=peak=default:
CC= icc -m32
PORTABILITY=
COPTIMIZE=       -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
COPTIMIZE= $(FASTNOSTATIC)  -unroll2 -auto-ilp32  -ansi-alias
feedback=0

458.sjeng=peak=default:
COPTIMIZE= -unroll4

462.libquantum=peak=default:
basepeak=yes

464.h264ref=peak=default:
CC= icc -m32
PORTABILITY=
COPTIMIZE= -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXX= icpc -m32
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
PORTABILITY=
CXXOPTIMIZE= -opt-ra-region-strategy=block -ansi-alias

473.astar=peak=default:
CXXOPTIMIZE= $(FASTNOSTATIC)           -opt-prefetch -auto-p32
feedback=0
submit       = taskset -c $SPECCOPYNUM $command

483.xalancbmk=peak=default:
CXX= icpc -m32
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
PORTABILITY=
CXXOPTIMIZE= $(FASTNOSTATIC)   -opt-prefetch -ansi-alias
feedback=no

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32 -ansi-alias
CXXOPTIMIZE=     -auto-ilp32 -ansi-alias
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  $(FASTNOSTATIC) -prof-use

410.bwaves=peak=default:
basepeak=yes

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep-

433.milc=peak=default:
OPTIMIZE=

434.zeusmp=peak=default:
basepeak=yes

435.gromacs=peak=default:
basepeak=yes

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
basepeak=yes

444.namd=peak=default:
OPTIMIZE= -fno-alias
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
basepeak=yes

450.soplex=peak=default:
basepeak=yes

453.povray=peak=default:
CXXOPTIMIZE= -unroll4 -ansi-alias

454.calculix=peak=default:
OPTIMIZE= $(FASTNOSTATIC)
feedback=0

459.GemsFDTD=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -opt-prefetch -parallel

465.tonto=peak=default:
OPTIMIZE=  -inline-calloc -opt-malloc-options=3 -auto -unroll4

470.lbm=peak=default:
basepeak=yes

481.wrf=peak=default:
basepeak=yes

482.sphinx3=peak=default:
OPTIMIZE= $(FASTNOSTATIC)
COPTIMIZE= -unroll2 -ansi-alias -parallel
feedback=no

#include: SUT-speed.conf
#  ----- Begin inclusion of 'SUT-speed.conf'
############################################################################
default=default=default=default:
license_num      = 19
test_sponsor     = Fujitsu
hw_avail         = Oct-2013
sw_avail         = Sep-2013
tester           = Fujitsu
hw_memory        = 256 GB (16 x 16 GB 2Rx4 PC3-12800R-11, ECC)
hw_disk          = 1 x SATA, 500 GB, 7200 RPM
hw_fpu           = Integrated
hw_ncpuorder     = 1,2 chips
hw_vendor        = Fujitsu
sw_file          = ext4
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 20 MB I+D on chip per chip
hw_ocache        = None
hw_other         = None
hw_nthreadspercore = 2
prepared_by      = Fujitsu
sw_os000         = Red Hat Enterprise Linux Server release 6.4
sw_os001 = (Santiago)
sw_os002         = 2.6.32-358.11.1.el6.x86_64
sw_state         = Run level 3 (multi-user)
notes_plat_000   = BIOS configuration:
notes_plat_005   = Energy Performance = Performance
notes_plat_010   = Utilization Profile = Unbalanced
notes_055        =
notes_060        = For information about Fujitsu please visit: http://www.fujitsu.com
hw_cpu_name      = Intel Xeon E5-2620 v2
hw_cpu_char      = Intel Turbo Boost Technology up to 2.60 GHz
hw_cpu_mhz       = 2100
hw_model         = PRIMERGY RX300 S8, Intel Xeon E5-2620 v2, 2.10 GHz
hw_ncores        = 12
hw_nchips        = 2
hw_ncoresperchip = 6
hw_nthreadspercore = 2
hw_tcache        = 15 MB I+D on chip per chip
# ---- End inclusion of '/SPECcpu2006/config/SUT-speed.conf'

notes_025        = Binaries compiled on a system with 1x Core i7-860 CPU + 8GB
notes_030        = memory using RedHat EL 6.4
notes_os_000     = Stack size set to unlimited using "ulimit -s unlimited"

int=default=default=default:
sw_compiler000   = C/C++: Version 14.0.0.080 of Intel C++ Studio XE
sw_compiler001   = for Linux
sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other         = Microquill SmartHeap V10.0

default:
%ifdef %{THP_enabled}
notes_035        = Transparent Huge Pages enabled with:
notes_040        = echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled
%endif

%ifdef %{THP_disabled}
notes_200        = Transparent Huge Pages disabled with:
notes_201        = echo never  > /sys/kernel/mm/redhat_transparent_hugepage/enabled
%endif

%ifdef %{drop_caches}
notes_202        = Filesystem page cache cleared with:
notes_203        = echo 1>       /proc/sys/vm/drop_caches
%endif

%ifdef %{invoke_with_interleave}
notes_045        = runspec command invoked through numactl i.e.:
notes_050        = numactl --interleave=all runspec <etc>
%endif

fp=default=default=default:
sw_compiler001   = C/C++: Version 14.0.0.080 of Intel C++ Studio XE
sw_compiler002   = for Linux;
sw_compiler004   = Fortran: Version 14.0.0.080 of Intel Fortran
sw_compiler005   = Studio XE for Linux
sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 32/64-bit


# The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6818 -p -f'
default:
# Sysinfo program /SPECcpu2006/config/sysinfo.rev6818
# $Rev: 6818 $ $Date:: 2012-07-17 #$ e86d102572650a6e4d596a3cee98f191
# running on RX300 S8 Mon Sep 16 12:07:30 2013
#
# This section contains SUT (System Under Test) info as seen by
# some common utilities.  To remove or add to this section, see:
#   http://www.spec.org/cpu2006/Docs/config.html#sysinfo
#
# From /proc/cpuinfo
#    model name : Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz
#       2 "physical id"s (chips)
#       24 "processors"
#    cores, siblings (Caution: counting these is hw and system dependent.  The
#    following excerpts from /proc/cpuinfo might not be reliable.  Use with
#    caution.)
#       cpu cores : 6
#       siblings  : 12
#       physical 0: cores 0 1 2 3 4 5
#       physical 1: cores 0 1 2 3 4 5
#    cache size : 15360 KB
#
# From /proc/meminfo
#    MemTotal:       264500808 kB
#    HugePages_Total:       0
#    Hugepagesize:       2048 kB
#
# /usr/bin/lsb_release -d
#    Red Hat Enterprise Linux Server release 6.4 (Santiago)
#
# From /etc/*release* /etc/*version*
#    redhat-release: Red Hat Enterprise Linux Server release 6.4 (Santiago)
#    system-release: Red Hat Enterprise Linux Server release 6.4 (Santiago)
#    system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server
#
# uname -a:
#    Linux RX300 S8 2.6.32-358.11.1.el6.x86_64 #1 SMP Wed May 15 10:48:38 EDT 2013
#    x86_64 x86_64 x86_64 GNU/Linux
#
# run-level 5 Sep 16 12:05
#
# SPEC is set to: /SPECcpu2006
#    Filesystem    Type    Size  Used Avail Use% Mounted on
#    /dev/sda1     ext4    433G   26G  385G   7% /
#
# Additional information from dmidecode:
#   BIOS FUJITSU // American Megatrends Inc. V4.6.5.4 R1.0.0 for D2939-B1x
#   08/01/2013
#   Memory:
#    16x   16 GB
#    2x Dimm11_Manufacturer Dimm11_PartNum
#    2x Dimm2_Manufacturer Dimm2_PartNum
#    2x Dimm5_Manufacturer Dimm5_PartNum
#    2x Dimm8_Manufacturer Dimm8_PartNum
#    14x Hynix Semiconducto HMT42GR7AFR4A 16 GB 1600 MHz 1 rank
#    2x Hynix Semiconductor HMT42GR7AFR4A- 16 GB 1600 MHz 1 rank
#
# (End of data from sysinfo program)
# hw_cpu_name    = Intel Xeon E5-2620 v2
# hw_disk        = 433 GB  add more disk info here
# hw_memory001   = 252.248 GB fixme: If using DDR3, format is:
# hw_memory002   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
# hw_nchips      = 2
# prepared_by    = root  (is never output, only tags rawfile)
# sw_file        = ext4
# sw_os001       = Red Hat Enterprise Linux Server release 6.4 (Santiago)
# sw_os002       = 2.6.32-358.11.1.el6.x86_64
# sw_state       = Run level 5 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.

483.xalancbmk:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


473.astar:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


456.hmmer:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

default:
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =KMP_AFFINITY = "granularity=fine,compact,1,0"
notes_010 =LD_LIBRARY_PATH = "/SPECcpu2006/libs/32:/SPECcpu2006/libs/64:/SPECcpu2006/sh"
notes_015 =OMP_NUM_THREADS = "12"
notes_020 =