CPU2006 license: | 3 | Test date: | Nov-2012 |
---|---|---|---|
Test sponsor: | Hewlett-Packard Company | Hardware Availability: | Oct-2012 |
Tested by: | Hewlett-Packard Company | Software Availability: | Jun-2012 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5-4650L |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.10 GHz |
CPU MHz: | 2600 |
FPU: | Integrated |
CPU(s) enabled: | 32 cores, 4 chips, 8 cores/chip, 2 threads/core |
CPU(s) orderable: | 2,4 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 20 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 256 GB (32 x 8 GB 2Rx4 PC3-12800R-11, ECC) |
Disk Subsystem: | 2 x 300 GB 10 K SAS, RAID 1 |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.3, (Santiago) 2.6.32-279.el6.x86_64 |
Compiler: | C/C++: Version 12.1.2.273 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V9.01 HP Array Configuration Utility CLI 9.0-16.0 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 64 | 720 | 868 | 718 | 871 | 715 | 874 | 64 | 608 | 1030 | 605 | 1030 | 606 | 1030 |
401.bzip2 | 64 | 970 | 636 | 965 | 640 | 970 | 637 | 64 | 934 | 661 | 933 | 662 | 934 | 661 |
403.gcc | 64 | 573 | 899 | 569 | 905 | 569 | 905 | 64 | 573 | 899 | 569 | 905 | 569 | 905 |
429.mcf | 64 | 335 | 1740 | 334 | 1750 | 334 | 1750 | 64 | 335 | 1740 | 334 | 1750 | 334 | 1750 |
445.gobmk | 64 | 771 | 871 | 770 | 872 | 770 | 872 | 64 | 751 | 894 | 753 | 892 | 754 | 890 |
456.hmmer | 64 | 406 | 1470 | 406 | 1470 | 407 | 1470 | 64 | 342 | 1740 | 342 | 1740 | 344 | 1740 |
458.sjeng | 64 | 894 | 866 | 895 | 865 | 894 | 866 | 64 | 863 | 898 | 864 | 896 | 860 | 901 |
462.libquantum | 64 | 189 | 7010 | 189 | 7010 | 189 | 7010 | 64 | 189 | 7010 | 189 | 7010 | 189 | 7010 |
464.h264ref | 64 | 929 | 1520 | 935 | 1520 | 929 | 1520 | 64 | 922 | 1540 | 928 | 1530 | 920 | 1540 |
471.omnetpp | 64 | 605 | 661 | 605 | 661 | 605 | 661 | 64 | 575 | 696 | 574 | 697 | 575 | 696 |
473.astar | 64 | 669 | 672 | 667 | 674 | 667 | 673 | 64 | 669 | 672 | 667 | 674 | 667 | 673 |
483.xalancbmk | 64 | 385 | 1150 | 385 | 1150 | 385 | 1150 | 64 | 385 | 1150 | 385 | 1150 | 385 | 1150 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited" Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/transparent_hugepage/enabled Filesystem page cache cleared with: echo 1 > /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --localalloc runspec <etc> Accelerator Ratio for Reads/Writes set to = 100% Read / 0% Write in HP Array Configuration Utility, CLI version 9.0-16.0
BIOS Configuration: HP Power Profile set to Maximum Performance Memory Power Savings Mode set to Maximum Performance Thermal Configuration set to Maximum Cooling Sysinfo program /cpu2006/config/sysinfo.rev6800 $Rev: 6800 $ $Date:: 2011-10-11 #$ 6f2ebdff5032aaa42e583f96b07f99d3 running on BL660c-GJ2 Sat Nov 3 22:04:10 2012 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/cpu2006/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5-4650L 0 @ 2.60GHz 4 "physical id"s (chips) 64 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 8 siblings : 16 physical 0: cores 0 1 2 3 4 5 6 7 physical 1: cores 0 1 2 3 4 5 6 7 physical 2: cores 0 1 2 3 4 5 6 7 physical 3: cores 0 1 2 3 4 5 6 7 cache size : 20480 KB From /proc/meminfo MemTotal: 264485280 kB HugePages_Total: 0 Hugepagesize: 2048 kB /usr/bin/lsb_release -d Red Hat Enterprise Linux Server release 6.3 (Santiago) From /etc/*release* /etc/*version* redhat-release: Red Hat Enterprise Linux Server release 6.3 (Santiago) system-release: Red Hat Enterprise Linux Server release 6.3 (Santiago) system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server uname -a: Linux BL660c-GJ2 2.6.32-279.el6.x86_64 #1 SMP Wed Jun 13 18:24:36 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux run-level 3 Nov 3 21:57 SPEC is set to: /cpu2006 Filesystem Type Size Used Avail Use% Mounted on /dev/sda3 ext4 273G 14G 246G 6% / Additional information from dmidecode: BIOS HP I32 08/20/2012 Memory: 32x HP Not Specified 8 GB 1600 MHz 2 rank (End of data from sysinfo program)
Environment variables set by runspec before the start of the run: KMP_AFFINITY = "granularity=fine,compact,1,0" LD_LIBRARY_PATH = "/cpu2006/libs2/32:/cpu2006/libs2/64" Binaries compiled on a system with 2x Xeon E5-2677 CPU + 256GB memory using SLES11 SP2, RC3
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/spec/libs2/32 -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | basepeak = yes |
429.mcf: | basepeak = yes |
445.gobmk: | -xSSE4.2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xSSE4.2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/spec/libs2/32 -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |