CPU2006 license: | 19 | Test date: | May-2012 |
---|---|---|---|
Test sponsor: | Fujitsu | Hardware Availability: | May-2012 |
Tested by: | Fujitsu | Software Availability: | Feb-2012 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E3-1230 v2 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.7 GHz |
CPU MHz: | 3300 |
FPU: | Integrated |
CPU(s) enabled: | 4 cores, 1 chip, 4 cores/chip, 2 threads/core |
CPU(s) orderable: | 1 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 8 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 16 GB (2 x 8 GB 2Rx8 PC3-12800E-11, ECC) |
Disk Subsystem: | 1 x SATA, 500 GB, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.2 (Santiago) 2.6.32-220.el6.x86_64 |
Compiler: | C/C++: Version 12.1.0.293 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V10.0 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 8 | 556 | 141 | 559 | 140 | 557 | 140 | 8 | 475 | 165 | 469 | 167 | 476 | 164 |
401.bzip2 | 8 | 759 | 102 | 755 | 102 | 754 | 102 | 8 | 743 | 104 | 733 | 105 | 734 | 105 |
403.gcc | 8 | 426 | 151 | 428 | 150 | 426 | 151 | 8 | 425 | 152 | 426 | 151 | 429 | 150 |
429.mcf | 8 | 287 | 254 | 289 | 252 | 278 | 262 | 8 | 287 | 254 | 289 | 252 | 278 | 262 |
445.gobmk | 8 | 590 | 142 | 595 | 141 | 591 | 142 | 8 | 587 | 143 | 579 | 145 | 578 | 145 |
456.hmmer | 8 | 317 | 236 | 315 | 237 | 315 | 237 | 8 | 268 | 279 | 265 | 282 | 265 | 282 |
458.sjeng | 8 | 688 | 141 | 690 | 140 | 687 | 141 | 8 | 656 | 148 | 655 | 148 | 656 | 148 |
462.libquantum | 8 | 150 | 1110 | 149 | 1110 | 149 | 1110 | 8 | 148 | 1120 | 148 | 1120 | 148 | 1120 |
464.h264ref | 8 | 718 | 246 | 715 | 248 | 716 | 247 | 8 | 709 | 250 | 706 | 251 | 704 | 251 |
471.omnetpp | 8 | 472 | 106 | 477 | 105 | 476 | 105 | 8 | 454 | 110 | 455 | 110 | 457 | 109 |
473.astar | 8 | 539 | 104 | 537 | 105 | 536 | 105 | 8 | 539 | 104 | 537 | 105 | 536 | 105 |
483.xalancbmk | 8 | 282 | 196 | 280 | 197 | 284 | 195 | 8 | 282 | 196 | 280 | 197 | 284 | 195 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited"
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/SPECcpu2006/libs/32:/SPECcpu2006/libs/64" Binaries compiled on a system with 2x E5-2650 CPU + 96 GB memory using RHEL6.2 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> This result was measured on the PRIMERGY TX140S1p. The PRIMERGY TX140S1p and the PRIMERGY TX120 S3p are electronically equivalent. For information about Fujitsu please visit: http://www.fujitsu.com
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/opt/SmartHeap/lib -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | -xSSE4.2 -ipo -O3 -no-prec-div |
429.mcf: | basepeak = yes |
445.gobmk: | -xAVX(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xSSE4.2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | -xAVX -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
464.h264ref: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/opt/SmartHeap/lib -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |