# Invocation command line:
# /home/cpu2006/bin/runspec --define external --rate 8 -c cpu2006.1.2.ic12.1rc1.linux64.sse42.rate.17aug2011.cfg --define cores=8 --define physicalfirst --define invoke_with_interleave --define drop_caches --define THP_enabled -T all int
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       Intel Compiler 12.1
#      Operating system version:    64-Bit RedHat Enterprise Linux64 5.5
#      Hardware:                    Intel processors supporting SSE4.2
#
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# Aug 2011 IC 12.1 RC1 Linux64
############################################################################
action      = validate
tune        = base,peak
%define version 17aug2011
ext         = cpu2006.1.2.ic12.1rc1.linux64.sse42.rate.%{version}
fail_build  = 1
PATHSEP     = /
check_md5=1
reportable=1
bench_post_setup=sync
parallel_test=0
mean_anyway=1
sysinfo_program = specperl $[top]/config/sysinfo.rev6800

flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic12.1-official-linux64.20111122.xml
%ifdef %{external}
flagsurl001=http://www.spec.org/cpu2006/flags/PlatformHitachi-V1.2.xml
%endif

# Set some environment variables
preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64

#
# These are listed as benchmark-tuning-extension-machine
#
int=default=default=default:
CC=  icc  -m32
CXX= icpc -m32
OBJ = .o
SMARTHEAP32_DIR = /smartheap
SMARTHEAP64_DIR = /smartheap

fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

# For UP systems, we need to know if the processors are ordered across cores first or in order
# If across cores, processors 0, 1, 2 and 3 are on distinct physical cores
# Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores

default:
submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command

%ifdef %{no-numa}
submit       = taskset -c $SPECCOPYNUM $command
%endif

####################################################################
# Compiler options
# for Nehalem use -xSSE4.2
# for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3
####################################################################
default:
SSE          = -xSSE4.2
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div
FAST =  $(SSE) -ipo -O3 -no-prec-div  -static

################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX


################################################################
# Tuning Flags
################################################################
#
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same
# flags are used in the same order for all benchmarks of a given language

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    $(FASTNOSTATIC)  -opt-prefetch -opt-mem-layout-trans=3
CXXOPTIMIZE=  $(FASTNOSTATIC)  -opt-prefetch -opt-mem-layout-trans=3

fp=base=default=default:
OPTIMIZE=     $(FAST) -opt-prefetch
COPTIMIZE=    -auto-p32 -ansi-alias -opt-mem-layout-trans=3
CXXOPTIMIZE=  -auto-p32 -ansi-alias -opt-mem-layout-trans=3

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=         -ansi-alias -opt-mem-layout-trans=3
CXXOPTIMIZE=       -ansi-alias -opt-mem-layout-trans=3
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = -prof-gen
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64
COPTIMIZE= -auto-ilp32

401.bzip2=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -opt-prefetch  -auto-ilp32 -ansi-alias

403.gcc=peak=default:
COPTIMIZE = $(FASTNOSTATIC)
feedback=0

429.mcf=peak=default:
basepeak=yes

445.gobmk=peak=default:
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE=  $(FASTNOSTATIC) -unroll2  -auto-ilp32
feedback=no

458.sjeng=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -unroll4 -auto-ilp32

462.libquantum=peak=default:
basepeak=yes

464.h264ref=peak=default:
COPTIMIZE=  -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE=  -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
basepeak=yes

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32
CXXOPTIMIZE=     -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   $(FASTNOSTATIC)                         -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  $(FASTNOSTATIC)                         -prof-use

410.bwaves=peak=default:
basepeak=yes

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -scalar-rep- -static

433.milc=peak=default:
OPTIMIZE= -static

434.zeusmp=peak=default:
basepeak=yes
feedback=0

435.gromacs=peak=default:
OPTIMIZE= -opt-prefetch -static

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
OPTIMIZE=     $(FAST) -opt-prefetch
feedback=no

444.namd=peak=default:
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
basepeak=yes

450.soplex=peak=default:
PORTABILITY =
CXX= icpc -m32
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=

453.povray=peak=default:
CXXOPTIMIZE= -unroll4  -ansi-alias

454.calculix=peak=default:
basepeak=yes

459.GemsFDTD=peak=default:
basepeak=yes

465.tonto=peak=default:
OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3

470.lbm=peak=default:
basepeak=yes

481.wrf=peak=default:
OPTIMIZE=     $(FAST)
feedback=0

482.sphinx3=peak=default:
PORTABILITY=
CC= icc -m32
OPTIMIZE= $(FASTNOSTATIC) -opt-mem-layout-trans=3
COPTIMIZE= -unroll2
feedback=no

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 35
test_sponsor     = HITACHI
hw_avail         = Apr-2012
sw_avail         = Feb-2012
tester           = HITACHI
hw_cpu_name      = Intel Xeon E5-2603
hw_cpu_char      =
hw_cpu_mhz       = 1800
hw_disk          = 300 GB SAS
hw_fpu           = Integrated
hw_memory000     = 128 GB (16 x 8 GB 2Rx4 PC3L-10600R-9, ECC,
hw_model         = Compute Blade 2000 (Intel Xeon E5-2603)
hw_ncpuorder     = 1, 2 chips
hw_ncores        = 8
hw_nchips        = 2
hw_ncoresperchip = 4
hw_nthreadspercore = 1
hw_other         = None
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 10 MB I+D on chip per chip
hw_ocache        = None
hw_vendor        = HITACHI
prepared_by      = Satoru Watanabe
sw_file          = ext4
sw_os001         = RedHat 6.2
sw_state         = Run level 3 (multi-user)
notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor.
notes_submit_010 = For details, please see the config file.
%ifdef %{no-numa}
notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor.
notes_submit_002 = For details, please see the config file.
%endif
notes_015        = Binaries compiled on a system with 1x Core i7-860 CPU + 8GB
notes_020        = memory using RHEL5.5
notes_os_000     = Stack size set to unlimited using "ulimit -s unlimited"

int=default=default=default:
sw_compiler000   = C/C++: Version 12.1.0.225 of Intel C++ Studio XE
sw_compiler001   = for Linux
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit
sw_other         = Microquill SmartHeap V9.01

default:
%ifdef %{THP_enabled}
notes_025        = Transparent Huge Pages enabled with:
notes_030        = echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled
%endif

%ifdef %{THP_disabled}
notes_200        = Transparent Huge Pages disabled with:
notes_201        = echo never  > /sys/kernel/mm/redhat_transparent_hugepage/enabled
%endif

%ifdef %{drop_caches}
notes_035        = Filesystem page cache cleared with:
notes_040        = echo 1>       /proc/sys/vm/drop_caches
%endif

%ifdef %{invoke_with_interleave}
notes_045        = runspec command invoked through numactl i.e.:
notes_050        = numactl --interleave=all runspec <etc>
notes_055 =
notes_060 =HITACHI BladeSymphony BS2000 and HITACHI Compute Blade 2000 are electronically equivalent.
notes_065 =The results have been measured on a HITACHI BladeSymphony BS2000.
%endif

fp=default=default=default:
sw_compiler001   = C/C++: Version 12.1.0.225 of Intel C++ Studio XE
sw_compiler002   = for Linux;
sw_compiler004   = Fortran: Version 12.1.0.225 of Intel Fortran
sw_compiler005   = Studio XE for Linux
sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = 32/64-bit


# The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6800'
default:
notes_plat_sysinfo_000 = BIOS Settings:
notes_plat_sysinfo_005 =   Adjacent Cache Line Prefetch = Enabled
notes_plat_sysinfo_010 =
notes_plat_sysinfo_015 = Sysinfo program /home/cpu2006/config/sysinfo.rev6800
notes_plat_sysinfo_020 = $Rev: 6800 $ $Date:: 2011-10-11 #$ 6f2ebdff5032aaa42e583f96b07f99d3
notes_plat_sysinfo_025 = running on localhost.localdomain Wed Apr 11 07:27:22 2012
notes_plat_sysinfo_030 =
notes_plat_sysinfo_035 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_040 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_045 =   http://www.spec.org/cpu2006/Docs/config.html#sysinfo
notes_plat_sysinfo_050 =
notes_plat_sysinfo_055 = From /proc/cpuinfo
notes_plat_sysinfo_060 =    model name : Intel(R) Xeon(R) CPU E5-2603 0 @ 1.80GHz
notes_plat_sysinfo_065 =       2 "physical id"s (chips)
notes_plat_sysinfo_070 =       8 "processors"
notes_plat_sysinfo_075 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_080 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_085 =    caution.)
notes_plat_sysinfo_090 =       cpu cores : 4
notes_plat_sysinfo_095 =       siblings  : 4
notes_plat_sysinfo_100 =       physical 0: cores 0 1 2 3
notes_plat_sysinfo_105 =       physical 1: cores 0 1 2 3
notes_plat_sysinfo_110 =    cache size : 10240 KB
notes_plat_sysinfo_115 =
notes_plat_sysinfo_120 = From /proc/meminfo
notes_plat_sysinfo_125 =    MemTotal:       132150296 kB
notes_plat_sysinfo_130 =    HugePages_Total:       0
notes_plat_sysinfo_135 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = /usr/bin/lsb_release -d
notes_plat_sysinfo_150 =    Red Hat Enterprise Linux Server release 6.2 (Santiago)
notes_plat_sysinfo_155 =
notes_plat_sysinfo_160 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_165 =    redhat-release: Red Hat Enterprise Linux Server release 6.2 (Santiago)
notes_plat_sysinfo_170 =    system-release: Red Hat Enterprise Linux Server release 6.2 (Santiago)
notes_plat_sysinfo_175 =    system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server
notes_plat_sysinfo_180 =
notes_plat_sysinfo_185 = uname -a:
notes_plat_sysinfo_190 =    Linux localhost.localdomain 2.6.32-220.4.2.el6.x86_64 #1 SMP Mon Feb 6
notes_plat_sysinfo_195 =    16:39:28 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_200 =
notes_plat_sysinfo_205 = run-level 3 Apr 11 07:20
notes_plat_sysinfo_210 =
notes_plat_sysinfo_215 = (End of data from sysinfo program)
hw_cpu_name    = Intel Xeon E5-2603
hw_disk        = 2 x 300 GB SAS, 10000 RPM RAID1 configuration
hw_memory001   = running at 1066 MHz)
hw_nchips      = 2
prepared_by    = Satoru Watanabe
sw_file        = ext4
sw_os000       = Red Hat Enterprise Linux Server release 6.2,
sw_os001 = Kernel 2.6.32-220.4.2.el6.x86_64
sw_state       = Run level 3 (multi-user)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =LD_LIBRARY_PATH = "/home/cpu2006/libs/32:/home/cpu2006/libs/64"
notes_010 =