CPU2006 license: | 19 | Test date: | Feb-2012 |
---|---|---|---|
Test sponsor: | Fujitsu | Hardware Availability: | Mar-2012 |
Tested by: | Fujitsu | Software Availability: | Dec-2011 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5-2620 |
CPU Characteristics: | Intel Turbo Boost Technology up to 2.50 GHz |
CPU MHz: | 2000 |
FPU: | Integrated |
CPU(s) enabled: | 6 cores, 1 chip, 6 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 15 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 64 GB (8 x 8 GB 2Rx4 PC3L-12800R-11, ECC, running at 1333 MHz and CL9) |
Disk Subsystem: | 1 x SATA, 500 GB, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.2 (Santiago) 2.6.32-220.el6.x86_64 |
Compiler: | C/C++: Version 12.1.0.225 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V9.01 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 12 | 860 | 136 | 862 | 136 | 861 | 136 | 12 | 731 | 160 | 733 | 160 | 728 | 161 |
401.bzip2 | 12 | 1083 | 107 | 1082 | 107 | 1085 | 107 | 12 | 1041 | 111 | 1052 | 110 | 1040 | 111 |
403.gcc | 12 | 611 | 158 | 611 | 158 | 613 | 158 | 12 | 611 | 158 | 611 | 158 | 611 | 158 |
429.mcf | 12 | 350 | 313 | 350 | 312 | 350 | 313 | 12 | 350 | 313 | 350 | 312 | 350 | 313 |
445.gobmk | 12 | 913 | 138 | 923 | 136 | 926 | 136 | 12 | 908 | 139 | 881 | 143 | 879 | 143 |
456.hmmer | 12 | 485 | 231 | 490 | 229 | 483 | 232 | 12 | 403 | 278 | 403 | 278 | 402 | 279 |
458.sjeng | 12 | 1042 | 139 | 1042 | 139 | 1041 | 139 | 12 | 999 | 145 | 997 | 146 | 1025 | 142 |
462.libquantum | 12 | 226 | 1100 | 226 | 1100 | 226 | 1100 | 12 | 226 | 1100 | 226 | 1100 | 226 | 1100 |
464.h264ref | 12 | 1138 | 233 | 1120 | 237 | 1120 | 237 | 12 | 1108 | 240 | 1118 | 237 | 1119 | 237 |
471.omnetpp | 12 | 589 | 127 | 590 | 127 | 590 | 127 | 12 | 552 | 136 | 555 | 135 | 555 | 135 |
473.astar | 12 | 715 | 118 | 715 | 118 | 718 | 117 | 12 | 715 | 118 | 715 | 118 | 718 | 117 |
483.xalancbmk | 12 | 398 | 208 | 398 | 208 | 398 | 208 | 12 | 398 | 208 | 398 | 208 | 398 | 208 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited"
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/SPECcpu2006/libs/32:/SPECcpu2006/libs/64" Binaries compiled on a system with 1x Core i7-860 CPU + 8GB memory using RHEL5.5 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> This result was measured on the PRIMERGY RX350 S7. The PRIMERGY RX350 S7 and the PRIMERGY TX300 S7 are electronically equivalent. For information about Fujitsu please visit: http://www.fujitsu.com
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/smartheap -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | -xSSE4.2 -ipo -O3 -no-prec-div |
429.mcf: | basepeak = yes |
445.gobmk: | -xSSE4.2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xSSE4.2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/smartheap -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |