CPU2006 license: | 19 | Test date: | Dec-2011 |
---|---|---|---|
Test sponsor: | Fujitsu | Hardware Availability: | Mar-2012 |
Tested by: | Fujitsu | Software Availability: | Dec-2011 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5-2690 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.80 GHz |
CPU MHz: | 2900 |
FPU: | Integrated |
CPU(s) enabled: | 16 cores, 2 chips, 8 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 20 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 128 GB (16 x 8 GB 2Rx4 PC3L-12800R-11, ECC) |
Disk Subsystem: | 1 x SATA, 500 GB, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.2 (Santiago) 2.6.32-220.el6.x86_64 |
Compiler: | C/C++: Version 12.1.0.225 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V9.01 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 32 | 615 | 509 | 613 | 510 | 615 | 508 | 32 | 528 | 592 | 537 | 582 | 529 | 591 |
401.bzip2 | 32 | 849 | 364 | 847 | 365 | 846 | 365 | 32 | 817 | 378 | 818 | 377 | 817 | 378 |
403.gcc | 32 | 485 | 531 | 484 | 533 | 486 | 530 | 32 | 485 | 531 | 484 | 533 | 486 | 530 |
429.mcf | 32 | 294 | 994 | 293 | 994 | 293 | 995 | 32 | 294 | 994 | 293 | 994 | 293 | 995 |
445.gobmk | 32 | 653 | 514 | 656 | 512 | 656 | 512 | 32 | 637 | 527 | 637 | 527 | 632 | 531 |
456.hmmer | 32 | 373 | 801 | 372 | 803 | 376 | 793 | 32 | 311 | 959 | 311 | 960 | 310 | 962 |
458.sjeng | 32 | 763 | 508 | 763 | 507 | 764 | 507 | 32 | 725 | 534 | 704 | 550 | 724 | 535 |
462.libquantum | 32 | 160 | 4130 | 160 | 4130 | 160 | 4140 | 32 | 160 | 4130 | 160 | 4130 | 160 | 4140 |
464.h264ref | 32 | 830 | 853 | 835 | 848 | 837 | 846 | 32 | 818 | 866 | 798 | 887 | 818 | 866 |
471.omnetpp | 32 | 543 | 368 | 542 | 369 | 542 | 369 | 32 | 513 | 390 | 514 | 389 | 514 | 389 |
473.astar | 32 | 578 | 389 | 580 | 388 | 578 | 389 | 32 | 578 | 389 | 580 | 388 | 578 | 389 |
483.xalancbmk | 32 | 322 | 686 | 323 | 685 | 324 | 682 | 32 | 322 | 686 | 323 | 685 | 324 | 682 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited"
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/SPECcpu2006/libs/32:/SPECcpu2006/libs/64" Binaries compiled on a system with 1x Core i7-860 CPU + 8GB memory using RHEL5.5 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> This result was measured on the PRIMERGY RX350 S7. The PRIMERGY RX350 S7 and the PRIMERGY TX300 S7 are electronically equivalent. For information about Fujitsu please visit: http://www.fujitsu.com
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xAVX -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xAVX -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/smartheap -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xAVX(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xAVX(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | basepeak = yes |
429.mcf: | basepeak = yes |
445.gobmk: | -xAVX(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xAVX -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xAVX(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | -xAVX(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xAVX(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/smartheap -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |