CPU2006 license: | 9001 | Test date: | Jan-2012 |
---|---|---|---|
Test sponsor: | Itautec | Hardware Availability: | Jul-2011 |
Tested by: | Itautec | Software Availability: | Dec-2011 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5640 |
CPU Characteristics: | Intel Turbo Boost Technology up to 2.93 GHz |
CPU MHz: | 2667 |
FPU: | Integrated |
CPU(s) enabled: | 8 cores, 2 chips, 4 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 12 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 48 GB (12 x 4 GB 2Rx4 PC3-10600R-9, ECC) |
Disk Subsystem: | 2 x 146 GB, SAS, 15000 RPM, RAID 0 |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server Release 6.2, 2.6.32-220.el6.x86_64 |
Compiler: | C/C++: Version 12.1.0 of Intel Compiler XE Build 20111011 |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V8.1 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 16 | 809 | 193 | 808 | 194 | 806 | 194 | 16 | 688 | 227 | 685 | 228 | 688 | 227 |
401.bzip2 | 16 | 1039 | 149 | 1040 | 148 | 1040 | 149 | 16 | 991 | 156 | 991 | 156 | 989 | 156 |
403.gcc | 16 | 712 | 181 | 708 | 182 | 709 | 182 | 16 | 712 | 181 | 708 | 182 | 709 | 182 |
429.mcf | 16 | 386 | 378 | 385 | 379 | 385 | 379 | 16 | 386 | 378 | 385 | 379 | 385 | 379 |
445.gobmk | 16 | 795 | 211 | 796 | 211 | 797 | 211 | 16 | 754 | 222 | 754 | 222 | 753 | 223 |
456.hmmer | 16 | 495 | 302 | 495 | 302 | 499 | 299 | 8 | 229 | 326 | 229 | 326 | 229 | 326 |
458.sjeng | 16 | 934 | 207 | 933 | 208 | 932 | 208 | 16 | 877 | 221 | 875 | 221 | 874 | 221 |
462.libquantum | 16 | 214 | 1550 | 215 | 1540 | 215 | 1550 | 16 | 214 | 1550 | 215 | 1540 | 215 | 1550 |
464.h264ref | 16 | 1204 | 294 | 1204 | 294 | 1233 | 287 | 16 | 1184 | 299 | 1164 | 304 | 1206 | 294 |
471.omnetpp | 16 | 575 | 174 | 577 | 173 | 577 | 173 | 16 | 534 | 187 | 533 | 188 | 535 | 187 |
473.astar | 16 | 725 | 155 | 725 | 155 | 726 | 155 | 16 | 725 | 155 | 725 | 155 | 726 | 155 |
483.xalancbmk | 16 | 384 | 288 | 383 | 288 | 383 | 288 | 16 | 384 | 288 | 383 | 288 | 383 | 288 |
The config file option 'submit' was used. numactl was used to bind copies to the cores
'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run. Large pages were not enabled for this run
Data Reuse disabled in BIOS. DCU Prefetcher disabled in BIOS.
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |