CPU2006 license: | 11 | Test date: | Nov-2011 |
---|---|---|---|
Test sponsor: | IBM Corporation | Hardware Availability: | Oct-2011 |
Tested by: | IBM Corporation | Software Availability: | Aug-2011 |
Hardware | |
---|---|
CPU Name: | Intel Pentium G850 |
CPU Characteristics: | |
CPU MHz: | 2900 |
FPU: | Integrated |
CPU(s) enabled: | 2 cores, 1 chip, 2 cores/chip |
CPU(s) orderable: | 1 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 3 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 16 GB (2 x 8 GB 2Rx8 PC3-10600E-9, ECC) |
Disk Subsystem: | 1 x 250 GB SATA, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server Release 6.1, Kernel 2.6.32-131.0.15.el6.x86_64 |
Compiler: | C/C++: Version 12.1.0.225 of Intel Compiler XE Build 20110803 |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V9.01 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 2 | 405 | 48.2 | 405 | 48.2 | 406 | 48.1 | 2 | 336 | 58.2 | 334 | 58.4 | 334 | 58.5 |
401.bzip2 | 2 | 610 | 31.6 | 602 | 32.0 | 604 | 31.9 | 2 | 575 | 33.6 | 574 | 33.6 | 572 | 33.8 |
403.gcc | 2 | 310 | 51.9 | 311 | 51.8 | 311 | 51.7 | 2 | 313 | 51.5 | 313 | 51.5 | 313 | 51.4 |
429.mcf | 2 | 174 | 105 | 174 | 105 | 174 | 105 | 2 | 174 | 105 | 174 | 105 | 174 | 105 |
445.gobmk | 2 | 494 | 42.5 | 494 | 42.5 | 494 | 42.5 | 2 | 485 | 43.2 | 485 | 43.2 | 485 | 43.2 |
456.hmmer | 2 | 223 | 83.5 | 224 | 83.5 | 224 | 83.2 | 2 | 210 | 88.9 | 210 | 88.9 | 210 | 88.9 |
458.sjeng | 2 | 526 | 46.0 | 526 | 46.0 | 526 | 46.0 | 2 | 505 | 48.0 | 506 | 47.9 | 505 | 47.9 |
462.libquantum | 2 | 100 | 413 | 100 | 413 | 101 | 412 | 2 | 100 | 413 | 100 | 413 | 101 | 412 |
464.h264ref | 2 | 508 | 87.1 | 504 | 87.8 | 504 | 87.9 | 2 | 501 | 88.3 | 493 | 89.8 | 491 | 90.1 |
471.omnetpp | 2 | 323 | 38.8 | 324 | 38.6 | 323 | 38.7 | 2 | 300 | 41.7 | 298 | 41.9 | 300 | 41.6 |
473.astar | 2 | 378 | 37.2 | 376 | 37.3 | 375 | 37.4 | 2 | 378 | 37.2 | 376 | 37.3 | 375 | 37.4 |
483.xalancbmk | 2 | 181 | 76.2 | 181 | 76.1 | 181 | 76.1 | 2 | 181 | 76.2 | 181 | 76.1 | 181 | 76.1 |
The config file option 'submit' was used. taskset was used to bind copies to the cores
BIOS Settings: C-State enabled in BIOS
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/root/SPECcpu12.1/smartheap:/root/SPECcpu12.1/ic12.1-libs/ia32/:/root/SPECcpu12.1/ic12.1-libs/intel64" Binaries compiled on a system with 1x Core i7-860 CPU + 8GB memory using RHEL5.5 with binutils-2.17.50.0.6-14.el5 Stack size set to unlimited using "ulimit -s unlimited" Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc>
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/smartheap -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | -xSSE4.2 -ipo -O3 -no-prec-div |
429.mcf: | basepeak = yes |
445.gobmk: | -xSSE4.2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xSSE4.2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/smartheap -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |