# Invocation command line:
# /root/s2k6/bin/runspec -c cpu2006.1.1.ic12.1rc1.linux64.sse42.speed.04aug2011.cfg --define cores=12 --flagsurl=Intel-ic12.1-linux64-revA.xml -o all all --nopreenv --note-preenv
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       Intel Compiler 12.1
#      Operating system version:    64-Bit RedHat Enterprise Linux64 5.5
#      Hardware:                    Intel processors supporting SSE4.2
#
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# Aug 2011 Intel Compiler 12.1 for Linux64
############################################################################
action      = validate
tune        = base,peak
ext         = cpu2006.1.1.ic12.1rc1.linux64.sse42.speed.04aug2011
PATHSEP     = /
check_md5=1
reportable=1
mean_anyway=1

# Set some environment variables
preENV_LD_LIBRARY_PATH = $[top]/smartheap:$[top]/ic12.1-libs/ia32/:$[top]/ic12.1-libs/intel64
preENV_OMP_NUM_THREADS = %{cores}
preENV_KMP_AFFINITY    = granularity=fine,scatter

#
# These are listed as benchmark-tuning-extension-machine
#

int=default=default=default:
CC=  icc  -m64
CXX= icpc -m64
OBJ = .o
SMARTHEAP32_DIR = /smartheap
SMARTHEAP64_DIR = /smartheap


fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

####################################################################
# Compiler options
# for Nehalem use -xSSE4.2
# for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3
####################################################################
default:
SSE          =  -xSSE4.2
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div
FAST =  $(SSE) -ipo -O3 -no-prec-div -static
################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################
default:
PORTABILITY = -DSPEC_CPU_LP64

400.perlbench=default:
CPORTABILITY  = -DSPEC_CPU_LINUX_X64

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY= -DSPEC_CPU_LINUX

483.xalancbmk=default=default=default:
CXXPORTABILITY= -DSPEC_CPU_LINUX

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

################################################################
# Tuning Flags
################################################################


################################################################
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same
# flags are used in the same order for all benchmarks of a given language
################################################################
471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP64_DIR) -lsmartheap64
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=   $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32
CXXOPTIMIZE= $(FASTNOSTATIC)           -opt-prefetch -auto-p32

fp=base=default=default:
FOPTIMIZE=    $(FAST) -parallel -opt-prefetch
COPTIMIZE=    $(FAST) -parallel -opt-prefetch -ansi-alias
CXXOPTIMIZE=  $(FAST)           -opt-prefetch -ansi-alias

################################################################
# Peak Tuning Flags int 2005 fast
################################################################
int=peak=default:
COPTIMIZE=       -auto-ilp32  -ansi-alias
CXXOPTIMIZE=     -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = -prof-gen
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
CC= icc -m32
PORTABILITY=
CPORTABILITY  = -DSPEC_CPU_LINUX_IA32
COPTIMIZE= -opt-prefetch -ansi-alias

401.bzip2=peak=default:
COPTIMIZE= -auto-ilp32 -opt-prefetch -no-prec-div -ansi-alias

403.gcc=peak=default:
COPTIMIZE= $(FASTNOSTATIC) -inline-calloc -opt-malloc-options=3 -auto-ilp32
feedback=0

429.mcf=peak=default:
basepeak=yes

445.gobmk=peak=default:
CC= icc -m32
PORTABILITY=
COPTIMIZE=       -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
COPTIMIZE= $(FASTNOSTATIC)  -unroll2 -auto-ilp32  -ansi-alias
feedback=0

458.sjeng=peak=default:
COPTIMIZE= -unroll4

462.libquantum=peak=default:
basepeak=yes

464.h264ref=peak=default:
CC= icc -m32
PORTABILITY=
COPTIMIZE= -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXX= icpc -m32
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
PORTABILITY=
CXXOPTIMIZE= -opt-ra-region-strategy=block -ansi-alias

473.astar=peak=default:
basepeak=yes

483.xalancbmk=peak=default:
CXX= icpc -m32
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
PORTABILITY=
CXXOPTIMIZE= $(FASTNOSTATIC)   -opt-prefetch -ansi-alias
feedback=no

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32 -ansi-alias
CXXOPTIMIZE=     -auto-ilp32 -ansi-alias
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  $(FASTNOSTATIC) -prof-use

410.bwaves=peak=default:
basepeak=yes

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- -static

433.milc=peak=default:
OPTIMIZE= -static

434.zeusmp=peak=default:
basepeak=yes

435.gromacs=peak=default:
basepeak=yes

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
basepeak=yes

444.namd=peak=default:
OPTIMIZE= -fno-alias
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
basepeak=yes

450.soplex=peak=default:
basepeak=yes

453.povray=peak=default:
CXXOPTIMIZE= -unroll4 -ansi-alias

454.calculix=peak=default:
OPTIMIZE= $(FASTNOSTATIC)
feedback=0

459.GemsFDTD=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -opt-prefetch -parallel

465.tonto=peak=default:
OPTIMIZE=  -inline-calloc -opt-malloc-options=3 -auto -unroll4

470.lbm=peak=default:
basepeak=yes

481.wrf=peak=default:
basepeak=yes

482.sphinx3=peak=default:
OPTIMIZE= $(FASTNOSTATIC)
COPTIMIZE= -unroll2 -ansi-alias -parallel
feedback=no

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 3
test_sponsor     = Hewlett-Packard Company
hw_avail         = Feb-2011
sw_avail         = Sep-2011
tester           = Hewlett-Packard Company
hw_cpu_name      = Intel Xeon E5645
hw_cpu_char      =Intel Turbo Boost Technology up to 2.80 GHz
hw_cpu_mhz       = 2400
hw_disk          = 1 x 146 GB 15K SAS
hw_fpu           = Integrated
hw_memory        = 48 GB (12 x 4 GB 2Rx4 PC3-10600R-9, ECC)
hw_model000      = ProLiant BL460c G7
hw_model001 = (2.40 GHz, Intel Xeon E5645)
hw_ncpuorder     = 1,2 chips
hw_ncores        = 12
hw_nchips        = 2
hw_ncoresperchip = 6
hw_nthreadspercore = 1
hw_other         = None
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 12 MB I+D on chip per chip
hw_ocache        = None
hw_vendor        = Hewlett-Packard Company
prepared_by      = Hewlett-Packard Company
sw_file          = ext4
sw_state         = Run level 3 (multi-user)
notes_025        = echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled
notes_030        = Filesystem page cache cleared with:
notes_035        = echo 1>       /proc/sys/vm/drop_caches
notes_040        = runspec command invoked through numactl i.e.:
notes_045        = numactl --interleave=all runspec <etc>

int=default=default=default:
sw_compiler001   = Intel(R) C++ Intel(R) 64 Compiler XE for applications running on IA32 and Intel(R) 64
sw_compiler002   = 12.1.0.225 Build 20110803
sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other001      = Microquill SmartHeap V9.01

fp=default=default=default:
sw_compiler000   = C/C++/Fortran: Version 12.1.0.225 of
sw_compiler001 = Intel Compiler XE
sw_compiler002   = Build 20110803
sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other = None




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic12.1-linux64.xml
flagsurl001 = http://www.spec.org/cpu2006/flags/HP-Intel-Linux-Settings-flags.20110316.xml
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =LD_LIBRARY_PATH = "/root/s2k6/smartheap:/root/s2k6/ic12.1-libs/ia32/:/root/s2k6/ic12.1-libs/intel64"
notes_010 =
notes_015 = Stack size set to unlimited using "ulimit -s unlimited"
notes_020 = Transparent Huge Pages disabled with:
sw_os001 = Red Hat Enterprise Linux Server release 6.1,
sw_os002 = Kernel 2.6.32-131.0.15.el.x86_64
notes_submit_000 = numactl was used to bind copies to the cores
notes_plat_000 = BIOS configuration:
notes_plat_005 =  HP Power Profile set to Maximum Performance
notes_plat_010 =  Thermal Configuration set to Increased Cooling
notes_plat_015 =  Data Reuse set to Disabled