CPU2006 license: | 3 | Test date: | May-2011 |
---|---|---|---|
Test sponsor: | Hewlett-Packard Company | Hardware Availability: | Mar-2011 |
Tested by: | Hewlett-Packard Company | Software Availability: | Dec-2010 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5640 |
CPU Characteristics: | Intel Turbo Boost Technology up to 2.93 GHz |
CPU MHz: | 2667 |
FPU: | Integrated |
CPU(s) enabled: | 8 cores, 2 chips, 4 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 12 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 48 GB (12 x 4 GB 2Rx4 PC3-10600R-9, ECC) |
Disk Subsystem: | 2 x 146 GB 10 K SAS |
Other Hardware: | None |
Software | |
---|---|
Operating System: | SUSE Linux Enterprise Server 11 (x86_64) SP1, Kernel 2.6.32.12-0.7-default |
Compiler: | C/C++: Version 12.0.1.116 of Intel C++ Compiler XE Build 20101116 |
Auto Parallel: | No |
File System: | ext3 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V9.01 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 16 | 834 | 187 | 830 | 188 | 832 | 188 | 16 | 664 | 236 | 665 | 235 | 664 | 235 |
401.bzip2 | 16 | 1125 | 137 | 1134 | 136 | 1134 | 136 | 16 | 983 | 157 | 983 | 157 | 988 | 156 |
403.gcc | 16 | 700 | 184 | 704 | 183 | 705 | 183 | 16 | 709 | 182 | 699 | 184 | 706 | 183 |
429.mcf | 16 | 581 | 251 | 587 | 248 | 584 | 250 | 8 | 263 | 277 | 260 | 280 | 262 | 278 |
445.gobmk | 16 | 785 | 214 | 787 | 213 | 784 | 214 | 16 | 743 | 226 | 745 | 225 | 742 | 226 |
456.hmmer | 16 | 512 | 291 | 512 | 292 | 511 | 292 | 8 | 229 | 325 | 229 | 325 | 230 | 325 |
458.sjeng | 16 | 936 | 207 | 936 | 207 | 935 | 207 | 16 | 868 | 223 | 867 | 223 | 868 | 223 |
462.libquantum | 16 | 289 | 1150 | 287 | 1150 | 287 | 1150 | 16 | 289 | 1150 | 287 | 1150 | 287 | 1150 |
464.h264ref | 16 | 1183 | 299 | 1199 | 295 | 1237 | 286 | 16 | 1178 | 300 | 1223 | 290 | 1184 | 299 |
471.omnetpp | 16 | 596 | 168 | 596 | 168 | 598 | 167 | 16 | 551 | 181 | 553 | 181 | 552 | 181 |
473.astar | 16 | 758 | 148 | 757 | 148 | 756 | 149 | 16 | 758 | 148 | 757 | 148 | 756 | 149 |
483.xalancbmk | 16 | 460 | 240 | 462 | 239 | 461 | 239 | 16 | 460 | 240 | 462 | 239 | 461 | 239 |
The config file option 'submit' was used. numactl was used to bind copies to the cores.
'nodev /mnt/hugepages hugetlbfs defaults 0 0' added to /etc/fstab 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run echo 7200 > /proc/sys/vm/nr_hugepages export HUGETLB_MORECORE=yes export LD_PRELOAD=/usr/lib64/libhugetlbfs.so
BIOS configuration: HP Power Profile set to Maximum Performance Thermal Configuration set to Increased Cooling Data Reuse set to Disabled
Binaries were compiled on RHEL5.5
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -Wl,-z,muldefs -L/smartheap -lsmartheap -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/smartheap -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |