# Invocation command line:
# /spec/cpu2006/v1.2/bin/runspec -c PubOct11961T -r int
# output_root used was "/spec/cpu2006/v1.2/zPubOct11961T"
############################################################################
# The following line MUST be set to the suite installed path!
%define install_path /spec/cpu2006/v1.2
#######################################################################
#
# SPEC CPU2006 Benchmark Config file IBM Power with AIX
#
#######################################################################

bind= \
0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100 \
104 108 112 116 120 124 128 132 136 140 144 148 152 156 160 164 168 172 176 \
180 184 188 192 196 200 204 208 212 216 220 224 228 232 236 240 244 248 252 \
256 260 264 268 272 276 280 284 288 292 296 300 304 308 312 316 320 324 328 \
332 336 340 344 348 352 356 360 364 368 372 376 380 \
1 5 9 13 17 21 25 29 33 37 41 45 49 53 57 61 65 69 73 77 81 85 89 93 97 101 \
105 109 113 117 121 125 129 133 137 141 145 149 153 157 161 165 169 173 177 \
181 185 189 193 197 201 205 209 213 217 221 225 229 233 237 241 245 249 253 \
257 261 265 269 273 277 281 285 289 293 297 301 305 309 313 317 321 325 329 \
333 337 341 345 349 353 357 361 365 369 373 377 381 \
2 6 10 14 18 22 26 30 34 38 42 46 50 54 58 62 66 70 74 78 82 86 90 94 98 102 \
106 110 114 118 122 126 130 134 138 142 146 150 154 158 162 166 170 174 178 \
182 186 190 194 198 202 206 210 214 218 222 226 230 234 238 242 246 250 254 \
258 262 266 270 274 278 282 286 290 294 298 302 306 310 314 318 322 326 330 \
334 338 342 346 350 354 358 362 366 370 374 378 382 \
3 7 11 15 19 23 27 31 35 39 43 47 51 55 59 63 67 71 75 79 83 87 91 95 99 103 \
107 111 115 119 123 127 131 135 139 143 147 151 155 159 163 167 171 175 179 \
183 187 191 195 199 203 207 211 215 219 223 227 231 235 239 243 247 251 255 \
259 263 267 271 275 279 283 287 291 295 299 303 307 311 315 319 323 327 331 \
335 339 343 347 351 355 359 363 367 371 375 379 383

%define Copy 384
%define Copy1 96
%define Copy2 192
%define Copy3 480

submit = bindprocessor \$\$ $BIND; $command
copies = %{Copy}

parallel_setup =  %{Copy}
parallel_setup_type = fork
parallel_setup_prefork = bindprocessor $$ $BIND
#bench_post_setup = sync
#post_setup = chfs -a freeze=1 /specbig ; chfs -a freeze=0 /specbig
# Disable parallel test for v1.1
#parallel_test =  1
parallel_test =  %{Copy}
parallel_test_submit = bindprocessor \$\$ $BIND; $command



#
# To navigate, "export GO=path" and use "ogo" instead of "go"
#              "export OGO_NO_WARN=0" to suppress path msg on every use
#
output_root=${top}/zPubOct11961T

# Turn off sysinfo, as the sample does not understand AIX anyway.
sysinfo_program =

#======================================================================
# Global Options apply to all runs
#======================================================================
#
# For just a report generated without a raw file or any runs required
# Do a "runspec --reportonly"   (also --action=report or --fakereport)
#
# Just set up the build or run directories, use --buildsetup or --setup
# on the runspec command

# Sets nobuild as the default - you will need -D to force a compile
#nobuild         = 1

# -D forces a build (recompile)
# -N prohibits a build (recompile)


%if '%{md}' eq 'build'
action          = build		# -a
%else
action          = validate	# -a
%endif
tune            = base,peak	# -T
iterations      = 3		# -n
output_format   = txt,csv,html,pdf	# -o
basepeak        = 0
reportable      = 1		# -l turns off
ignore_errors   = 0		# -I
mean_anyway     = 1
allow_extension_override = 1
ext             = AIX961T		# -e
size            = test,train,ref # -i



# These are the envionment variables that are set before the run
preenv		= 1
preENV_MALLOCOPTIONS=pool
preENV_MEMORY_AFFINITY=MCM
preENV_XLFRTEOPTS=intrinthds=1

%ifdef %{noVSX}
%define VSX
%define VMX
%else
%ifdef %{useVSX}
%define VSX -qenablevmx -qvecnvol
%define VMX -qenablevmx -qvecnvol
%else
%define VSX -qsimd -qvecnvol
%endif
%endif


# Control if the imbedded md5 string of compiler options is checked for
# recompile if the options have changed

%ifdef %{noMD5}
check_md5       = 0
%else
check_md5       = 1
%endif

# This is added to the MD5 sums, and must be 1 for submittable binaries.
# i.e. binaries made with this set to 0 will not be allowed to be used
# for submitable runs.  But it bypasses all checksums, so must be 0 if
# any sources are modified.  I am not yet sure if need this needs to be
# set to allow the generation of pmcount's PMU dir's
#strict_rundir_verify = 0


# Controls if the log file info is echo'd to the screen
teeout          = no

# If 1, make copy of the config file before modifing with MD5
# signitures of the compile options.
backup_config   = 0

# verbose -> -v
#verbose	= 1 to 99, 5 is default, 91 is good for debugging
#verbose	= 1

# Set up how parallel to do the compiles
%ifdef %{make_j}
makeflags       = -j%{make_j}
%endif

#--prevent log file lines that are too long for vi
log_line_width  = 180

# Point to where the usr/compiler/OS Flags file is
flagsurl000     = http://www.spec.org/cpu2006/flags/IBM-XL.20110613.xml
flagsurl001     = http://www.spec.org/cpu2006/flags/IBM-AIX.20110613.xml

CC_PATH         = /usr/vac/bin
CXX_PATH        = /usr/vacpp/bin
XLF_PATH        = /usr/bin

#===============================================================================
# How the compilers are called
# The settings used here are for IBM C/C++ and xl Fortran compilers
#===============================================================================
default=default=default=default:

CC      = $(CC_PATH)/xlc -qlanglvl=extc99
CXX     = $(CXX_PATH)/xlC
FC      = $(XLF_PATH)/xlf95

#===============================================================================
#======================================================================
# Base Level Optimizations
#   No limit to number of flags, must be same for all of each Language.
#======================================================================

%define LPC -qlargepage
%define LPL -blpdata
%define LP64L -bdatapsize:64K -bstackpsize:64K -btextpsize:64K
%define LPT64L -btextpsize:64K
%define IPAC -qipa=noobject
%define IPAL -qipa=threads
%define ILS -D_ILS_MACROS
%define O2 -O2 -qarch=auto -qtune=auto
%define O3 -O3 -qarch=auto -qtune=auto
%define O4 -O4
%define O5 -O5

%define c_suppress
%define cxx_suppress
%define f_suppress -qsuppress=cmpmsg:1500-010
%define ld_suppress -qsuppress=1500-036

EXTRA_CFLAGS   = %{c_suppress}
EXTRA_CXXFLAGS = %{cxx_suppress}
EXTRA_FFLAGS   = %{f_suppress}

OPTIMIZE       = %{LPC} %{IPAC}

default=base=default=default:
sw_base_ptrsize = 32-bit
# LDOPT is only good for non FDO builds, so only use for base
EXTRA_LDFLAGS  = %{ld_suppress}
LDOPT          = %{LPL}

int=base=default=default:
COPTIMIZE      = %{O5} %{ILS} -qalias=noansi -qalloca
CXXOPTIMIZE    = %{O4} %{VSX} %{ILS} -qrtti=all -D__IBM_FAST_SET_MAP_ITERATOR
LDCFLAGS       = %{IPAL} -bmaxdata:0x50000000
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x20000000

fp=base=default=default:
COPTIMIZE      = %{O5} %{ILS}
FOPTIMIZE      = %{O5} -qsmallstack=dynlenonheap -qalias=nostd
CXXOPTIMIZE    = %{O5} %{VSX}  %{ILS} -qrtti=all -D__IBM_FAST_VECTOR -D__IBM_FAST_SET_MAP_ITERATOR
LDCFLAGS       = %{IPAL} -bmaxdata:0x40000000
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x50000000
LDFFLAGS       = %{IPAL} -bmaxdata:0x60000000

#======================================================================
# INT Portability Flags
#     no optimizations allowed here
#======================================================================

400.perlbench=default=default=default:
CPORTABILITY   = -DSPEC_CPU_AIX

462.libquantum=default=default=default:
CPORTABILITY   = -DSPEC_CPU_AIX

464.h264ref=default=default=default:
CPORTABILITY   = -DSPEC_CPU_AIX -qchars=signed

483.xalancbmk=default=default=default:
CXXPORTABILITY = -DSPEC_CPU_AIX

#======================================================================
# FP  Portability Flags
#     no optimizations allowed here
#======================================================================

410.bwaves=default=default=default:
FPORTABILITY   = -qfixed

416.gamess=default=default=default:
FPORTABILITY   = -qfixed

434.zeusmp=default=default=default:
FPORTABILITY   = -qfixed

435.gromacs=default=default=default:
FPORTABILITY   = -qfixed -qextname

436.cactusADM=default=default=default:
FPORTABILITY   = -qfixed -qextname

437.leslie3d=default=default=default:
FPORTABILITY   = -qfixed

454.calculix=default=default=default:
FPORTABILITY   = -qfixed -qextname

481.wrf=default=default=default:
CPORTABILITY   = -DSPEC_CPU_AIX -DNOUNDERSCORE

482.sphinx3=default=default=default:
CPORTABILITY   = -qchars=signed

#======================================================================
#
# Default peak flags.
#
#======================================================================

default=peak=default=default:
sw_peak_ptrsize = 32/64-bit
EXTRA_LDFLAGS  = %{LPL} %{LPT64L} %{ld_suppress}

%define FDPRCOMP
%define FDPRSAVE mv $baseexe ${baseexe}.orig;


#======================================================================
# INT peak Flags
#======================================================================

400.perlbench=peak=default=default:
# C only Benchmark
# Multiple training inputs
OPTIMIZE       = %{O2}
COPTIMIZE      = %{ILS} -qalias=noansi %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifndef %{64}
LDCFLAGS       = -bmaxdata:0x50000000
%else
CPORTABILITY   = -DSPEC_CPU_AIX -DSPEC_CPU_LP64
%endif
%define FDPROPTS -O4 -cbpth -1 -sdp -1 -m power7
fdo_pre2   = rm -f $baseexe.nprof $baseexe.instr; fdpr -1 -q -p $baseexe
fdo_run2   = fdpr -2 -q -p $commandexe -x $command
fdo_post2  = fdpr -3 -q %{FDPROPTS} -p $baseexe;  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_400_000= fdpr binary optimization tool used for 400.perlbench
notes_peak_fdpr_400_005=  with options -O4 -cbpth -1 -sdp -1 -m power7
%undef FDPROPTS

401.bzip2=peak=default=default:
# C only Benchmark
# Multiple training inputs
OPTIMIZE       = %{O5} %{LPC} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifndef %{64}
LDCFLAGS       = %{IPAL} -bmaxdata:0x50000000
%else
LDCFLAGS       = %{IPAL}
%endif
%define FDPROPTS -O4 -vrox -m power7
fdo_pre2   = rm -f $baseexe.nprof $baseexe.instr; fdpr -1 -q -p $baseexe
fdo_run2   = fdpr -2 -q -p $commandexe -x $command
fdo_post2  = fdpr -3 -q %{FDPROPTS} -p $baseexe;  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_401_000= fdpr binary optimization tool used for 401.bzip2
notes_peak_fdpr_401_005=  with options -O4 -vrox -m power7
%undef FDPROPTS

403.gcc=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O3} %{LPC} %{IPAC}
COPTIMIZE      = %{ILS} -qalloca %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifndef %{64}
LDCFLAGS       = %{IPAL} -bmaxdata:0x50000000
%else
CPORTABILITY   = -DSPEC_CPU_LP64
LDCFLAGS       = %{IPAL}
%endif
%define FDPROPTS -O4 -cbpth -1 -sdp -1 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_403_000= fdpr binary optimization tool used for 403.gcc
notes_peak_fdpr_403_005=  with options -O4 -cbpth -1 -sdp -1 -m power7
%undef FDPROPTS

429.mcf=peak=default=default:
# C only Benchmark
copies = %{Copy2}
OPTIMIZE       = %{O5} %{VSX} %{LPC} %{IPAC}
COPTIMIZE       = %{ILS} %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifndef %{64}
LDCFLAGS       = %{IPAL} -bmaxdata:0x50000000
%else
LDCFLAGS       = %{IPAL}
%endif
%define FDPROPTS -O4 -nobp -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_429_000= fdpr binary optimization tool used for 429.mcf
notes_peak_fdpr_429_005=  with options -O4 -nobp -m power7
%undef FDPROPTS

445.gobmk=peak=default=default:
# C only Benchmark
# Multiple training inputs
OPTIMIZE       = %{O4} %{LPC} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O3 -m power7
fdo_pre2   = rm -f $baseexe.nprof $baseexe.instr; fdpr -1 -q -p $baseexe
fdo_run2   = fdpr -2 -q -p $commandexe -x $command
fdo_post2  = fdpr -3 -q %{FDPROPTS} -p $baseexe;  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_445_000= fdpr binary optimization tool used for 445.gobmk
notes_peak_fdpr_445_005=  with options -O3 -m power7
%undef FDPROPTS

456.hmmer=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O5} %{VSX} %{IPAC} -qassert=refalign
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}
%define FDPROPTS -O3 -lu -1 -nodp -sdp 9 -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_456_000= fdpr binary optimization tool used for 456.hmmer
notes_peak_fdpr_456_005=  with options -O3 -lu -1 -nodp -sdp 9 -m power7
%undef FDPROPTS

458.sjeng=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O5} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O3 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_458_000= fdpr binary optimization tool used for 458.sjeng
notes_peak_fdpr_458_005=  with options -O3 -m power7
%undef FDPROPTS

462.libquantum=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O5} -q64 %{LPC} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}
%define FDPROPTS -O4 -cbpth -1 -sdp -1 -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_462_000= fdpr binary optimization tool used for 462.libquantum
notes_peak_fdpr_462_005=  with options -O4 -cbpth -1 -sdp -1 -m power7
%undef FDPROPTS

464.h264ref=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O5} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}
EXTRA_LDFLAGS  = %{LP64L} %{ld_suppress}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O4 -rcctf 0 -vrox -RD -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_464_000= fdpr binary optimization tool used for 464.h264ref
notes_peak_fdpr_464_005=  with options -O4 -rcctf 0 -vrox -RD -m power7
%undef FDPROPTS

471.omnetpp=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O4} %{IPAC}
CXXOPTIMIZE    = %{ILS} %{FDPRCOMP} -qalign=natural -qrtti=all -qinlglue -D__IBM_FAST_SET_MAP_ITERATOR
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x20000000
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O3 -cbpth -1 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_471_000= fdpr binary optimization tool used for 471.omnetpp
notes_peak_fdpr_471_005=  with options -O3 -cbpth -1 -m power7
%undef FDPROPTS

473.astar=peak=default=default:
# C++ Benchmark
# Multiple training inputs
copies=%{Copy3}
OPTIMIZE       = %{O4} %{VSX} %{LPC} %{IPAC}
CXXOPTIMIZE    = %{ILS} %{FDPRCOMP} -qinlglue -qalign=natural
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x20000000
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O3 -cbpth -1 -m power7
fdo_pre2   = rm -f $baseexe.nprof $baseexe.instr; fdpr -1 -q -p $baseexe
fdo_run2   = fdpr -2 -q -p $commandexe -x $command
fdo_post2  = fdpr -3 -q %{FDPROPTS} -p $baseexe;  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_473_000= fdpr binary optimization tool used for 473.astar
notes_peak_fdpr_473_005=  with options -O3 -cbpth -1 -m power7
%undef FDPROPTS

483.xalancbmk=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O4} %{VSX} -qarch=pwr5 -qtune=pwr5 %{LPC} %{IPAC}
CXXOPTIMIZE    = %{ILS} %{FDPRCOMP} -qinlglue -D__IBM_FAST_VECTOR
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x20000000
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O4 -rcctf 0 -nobp -m power7
fdo_pre2   = rm -f $baseexe.nprof $baseexe.instr; fdpr -1 -q -p $baseexe
fdo_run2   = fdpr -2 -q -p $commandexe -x $command
fdo_post2  = fdpr -3 -q %{FDPROPTS} -p $baseexe;  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_483_000= fdpr binary optimization tool used for 483.xalancbmk
notes_peak_fdpr_483_005=  with options -O4 -rcctf 0 -nobp -m power7
%undef FDPROPTS


999.specrand=peak=default=default:
# C only Benchmark - Must run, but not reported unless fails
OPTIMIZE       = %{O5} %{IPAC}
COPTIMIZE      = %{ILS}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O3 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_999_1 = fdpr binary optimization tool used for 999.specrand
notes_peak_fdpr_999_2 =  with options %{FDPROPTS}
%undef FDPROPTS


#======================================================================
# FP peak Flags
#======================================================================

410.bwaves=peak=default=default:
# Fortran Benchmark
OPTIMIZE       = %{O5} %{LPC} %{IPAC}
%ifndef %{64}
FOPTIMIZE      = %{FDPRCOMP} -qsmallstack=dynlenonheap
LDFFLAGS       = %{IPAL} -bmaxdata:0x50000000
%else
LDFFLAGS       = %{IPAL}
%endif

416.gamess=peak=default=default:
# Fortran Benchmark
OPTIMIZE       = %{O5} -qarch=pwr5 %{LPC} %{IPAC}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifndef %{64}
FOPTIMIZE      = -qalias=nostd
LDFFLAGS       = %{IPAL} -bmaxdata:0x40000000
%else
FOPTIMIZE      = -q64 -qalias=nostd
LDFFLAGS       = %{IPAL}
%endif
%define FDPROPTS -O4 -cbpth -1 -sdp -1 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_416_1 = fdpr binary optimization tool used for 416.gamess
notes_peak_fdpr_416_2 =  with options %{FDPROPTS}
%undef FDPROPTS

433.milc=peak=default=default:
# C only Benchmark
copies = %{Copy1}
OPTIMIZE       = %{O5} %{LPC} %{IPAC}
COPTIMIZE      = %{ILS} -qrestrict -qprefetch=aggressive -qalign=natural %{FDPRCOMP}
LDCFLAGS       = %{IPAL} -bmaxdata:0x40000000
%define FDPROPTS -O4 -nodp -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_433_1 = fdpr binary optimization tool used for 433.milc
notes_peak_fdpr_433_2 =  with options %{FDPROPTS}
%undef FDPROPTS

434.zeusmp=peak=default=default:
# Fortran Benchmark
OPTIMIZE       = %{O3} %{LPC}
FOPTIMIZE      = -qxlf90=nosignedzero %{FDPRCOMP}
LDFFLAGS       = -bmaxdata:0x40000000
%define FDPROPTS -O4 -vrox -nodp -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_434_1 = fdpr binary optimization tool used for 434.zeusmp
notes_peak_fdpr_434_2 =  with options %{FDPROPTS}
%undef FDPROPTS

435.gromacs=peak=default=default:
# Fortran & C Benchmark
OPTIMIZE       = %{O4} %{VSX} %{IPAC}
LDFFLAGS       = %{IPAL}
EXTRA_LDFLAGS  = %{LP64L} %{ld_suppress}
FOPTIMIZE      = %{FDPRCOMP}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_FFLAGS   = -qpdf1
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2

436.cactusADM=peak=default=default:
# Fortran & C Benchmark
#%define 64
OPTIMIZE       = %{O4} %{VSX}  %{IPAC}
%ifndef %{64}
LDFFLAGS       = %{IPAL} -bmaxdata:0x60000000
%else
LDFFLAGS       = %{IPAL}
FPPPORTABILITY = -DSPEC_CPU_LP64
%endif
#%undef 64
COPTIMIZE      = %{ILS} %{FDPRCOMP} -qnostrict
FOPTIMIZE      = %{FDPRCOMP} -qnostrict
%define FDPROPTS -O3 -lu -1 -nodp -sdp 9 -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_436_1 = fdpr binary optimization tool used for 436.cactusADM
notes_peak_fdpr_436_2 =  with options %{FDPROPTS}
%undef FDPROPTS


437.leslie3d=peak=default=default:
# Fortran Benchmark
copies = %{Copy1}
OPTIMIZE       = %{O5} -q64 %{IPAC}
FOPTIMIZE      = %{FDPRCOMP}
LDFFLAGS       = %{IPAL}
%define FDPROPTS -O4 -vrox -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_437_1 = fdpr binary optimization tool used for 437.leslie3d
notes_peak_fdpr_437_2 =  with options %{FDPROPTS}
%undef FDPROPTS

444.namd=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O5} -q64 %{VSX} %{LPC} %{IPAC}
CXXOPTIMIZE    = %{ILS}
LDCXXFLAGS     = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2

447.dealII=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O4} %{VSX} %{IPAC}
CXXOPTIMIZE    = %{ILS} -qrtti=all -D__IBM_FAST_VECTOR -D__IBM_FAST_SET_MAP_ITERATOR
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x50000000
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2

450.soplex=peak=default=default:
# C++ Benchmark
# Multiple training inputs
copies = %{Copy1}
%define 64
OPTIMIZE       = %{O4} -q64 %{LPC} %{IPAC}
CXXOPTIMIZE    = %{ILS} %{FDPRCOMP}
%ifndef %{64}
LDCXXFLAGS     = -bmaxdata:0x40000000
%endif
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O3 -lu -1 -nodp -sdp 9 -m power7
fdo_pre2   = rm -f $baseexe.nprof $baseexe.instr; fdpr -1 -q -p $baseexe
fdo_run2   = fdpr -2 -q -p $commandexe -x $command
fdo_post2  = fdpr -3 -q %{FDPROPTS} -p $baseexe;  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_450_1 = fdpr binary optimization tool used for 450.soplex
notes_peak_fdpr_450_2 =  with options %{FDPROPTS}
%undef FDPROPTS
%undef 64

453.povray=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O4} %{VSX} %{LPC} %{IPAC}
CXXOPTIMIZE    = %{ILS} -qalign=natural %{FDPRCOMP}
LDCXXFLAGS     = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O3 -cbpth -1 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_453_1 = fdpr binary optimization tool used for 453.povray
notes_peak_fdpr_453_2 =  with options %{FDPROPTS}
%undef FDPROPTS

454.calculix=peak=default=default:
# Fortran & C Benchmark
OPTIMIZE       = %{O5} %{VSX} %{LPC} %{IPAC}
FOPTIMIZE      = %{FDPRCOMP}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDFFLAGS       = %{IPAL}
EXTRA_LDFLAGS  = %{LP64L} %{ld_suppress}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_FFLAGS   = -qpdf1
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2

459.GemsFDTD=peak=default=default:
# Fortran Benchmark
copies = %{Copy1}
OPTIMIZE       = %{O4} -q64 %{LPC} %{IPAC}
FOPTIMIZE      = %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O3 -cbpth -1 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_459_1 = fdpr binary optimization tool used for 459.GemsFDTD
notes_peak_fdpr_459_2 =  with options %{FDPROPTS}
%undef FDPROPTS

465.tonto=peak=default=default:
# Fortran Benchmark
OPTIMIZE       = %{O5} %{VSX} %{IPAC}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifndef %{64}
LDFFLAGS       = %{IPAL} -bmaxdata:0x50000000
%endif
%define FDPROPTS -O4 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_465_1 = fdpr binary optimization tool used for 465.tonto
notes_peak_fdpr_465_2 =  with options %{FDPROPTS}
%undef FDPROPTS

470.lbm=peak=default=default:
# C Benchmark
OPTIMIZE       = %{O5} %{IPAC}
LDCFLAGS       = %{IPAL} -bmaxdata:0x30000000
COPTIMIZE      = %{ILS} %{FDPRCOMP}

481.wrf=peak=default=default:
# Fortran & C-for netCDF Benchmark
OPTIMIZE       = %{O5}
LDFFLAGS       = -bmaxdata:0x30000000
FOPTIMIZE      = %{FDPRCOMP}
COPTIMIZE      = %{ILS} %{FDPRCOMP}

482.sphinx3=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O3} %{LPC} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O4 -rcctf 0 -sdp 9 -vrox -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_482_1 = fdpr binary optimization tool used for 482.sphinx3
notes_peak_fdpr_482_2 =  with options %{FDPROPTS}
%undef FDPROPTS

998.specrand=peak=default=default:
# C only Benchmark - Must run, but not reported unless fails
copies = %{Copy1}
OPTIMIZE       = %{O5} %{LPC} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}

#===============================================================================
# Report requirements
#===============================================================================
default=default=default=default:
notes_submit_000        = The config file option 'submit' was used
notes_submit_005        = to assign benchmark copy to specific kernel thread using
notes_submit_010        = the "bindprocessor" command (see flags file for details).


license_num		= 11
test_sponsor		= IBM Corporation
tester			= IBM Corporation
hw_vendor		= IBM Corporation
hw_avail		= Oct-2011

hw_cpu_mhz              = 3444
hw_cpu_char000          = Intelligent Energy Optimization enabled,
hw_cpu_char001          = up to 3.780 GHz
hw_ocache		= None
hw_other		= None
hw_model                = IBM Power 780 (3.44 GHz, 96 core)
hw_memory               = 1 TB (64 x 16 GB) DDR3 1066 MHz
hw_ncpuorder            = 24,48,72,96 cores
hw_ncores               = 96
hw_nchips               = 16
hw_disk                 = 12 x 146.8 GB Raid0 SAS SFF 15K RPM
notes_os_020 = 38400 16M large pages defined with vmo command

hw_fpu			= Integrated
hw_pcache		= 32 KB I + 32 KB D on chip per core
hw_scache		= 256 KB I+D on chip per core
hw_tcache		= 4 MB I+D on chip per core

hw_cpu_name             = POWER7
hw_ncoresperchip        = 6
hw_nthreadspercore      = 4

sw_file			= AIX/JFS2
sw_state		= Multi-user

sw_avail		= Oct-2011
sw_os                   = IBM AIX V7.1
sw_compiler000          = C/C++: Version 11.1 of IBM XL C/C++ for AIX
sw_other		= None
fp=default=default=default:
sw_compiler11           = IBM XL Fortran for AIX, V13.1
sw_compiler12		=  Version: 13.01.0000.0007
sw_other		= None
default=default=default=default:

notes_os_000 = AIX updated to V7.1 TL 1 SP 1 (7.1.1.1)
notes_os_005 =
notes_os_010 = All ulimits set to unlimited.
notes_os_015 =
default=default=default=default:




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.

462.libquantum:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

default:
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =MALLOCOPTIONS = "pool"
notes_010 =MEMORY_AFFINITY = "MCM"
notes_015 =XLFRTEOPTS = "intrinthds=1"
notes_020 =
notes_comp_iler_000=C/C++ compiler update to August 2011 PTF
notes_comp_iler_005=      Version: 11.01.0000.0007