# Invocation command line:
# ./runspec --nobuild --config cpu2006.1.1.ic12.0.linux64.sse42.rate.apl2011_4s_E7_8870_sh9.cfg --flagsurl Intel-ic12.0-linux64-revB.xml,NEC-platform-linux64-revA.xml --parallel_test=1 --rate 80 -T all -o all int
# output_root was not used for this run
############################################################################
# Invocation command line:
# ./runspec --config cpu2006.1.1.ic12.0.linux64.sse42.rate.apl2011_8s_E7_8870_sh9.cfg --flagsurl Intel-ic12.0-linux64-revB.xml,NEC-platform-linux64-revA.xml --parallel_test=1 --rate 160 -T all -o all int
# output_root was not used for this run
############################################################################
# SPEC CPU2006 Intel Linux64 config file
############################################################################
action      = validate
tune        = base,peak
ext         = cpu2006.1.1.ic12.0.linux64.rhel6.1.rate.jul2011
PATHSEP     = /
check_md5=1
reportable=1
bench_post_setup=sync
parallel_test=0
mean_anyway=1

int=default=default=default:
CC=  icc  -m32
CXX= icpc -m32
OBJ = .o

SMARTHEAP32_DIR = /opt/SmartHeap_9/lib
SMARTHEAP64_DIR = /opt/SmartHeap_9/lib
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT

fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

437.leslie3d,453.povray,454.calculix,459.GemsFDTD,465.tonto=peak=default:
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

# For UP systems, we need to know if the processors are ordered across cores first or in order
# If across cores, processors 0, 1, 2 and 3 are on distinct physical cores
# Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores

default:
submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command

####################################################################
# Compiler options
####################################################################
default:
SSE          = -xSSE4.2
FAST         =  $(SSE) -ipo -O3 -no-prec-div -static
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div

####################################################################
# portability & libraries
####################################################################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX


################################################################
# Tuning Flags
################################################################

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    $(FASTNOSTATIC) -opt-prefetch
CXXOPTIMIZE=  $(FASTNOSTATIC) -opt-prefetch

fp=base=default=default:
OPTIMIZE=     $(FAST)
COPTIMIZE=    $(FAST)  -ansi-alias
CXXOPTIMIZE=  $(FAST)  -ansi-alias

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default=default:
COPTIMIZE=         -ansi-alias -auto-ilp32
CXXOPTIMIZE=       -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = -prof-gen
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
COPTIMIZE        = -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FAST) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FAST) -prof-use
PASS1_LDOPT      =
PASS2_LDOPT      =

401.bzip2=peak=default:
CC               = icc -m64
CPORTABILITY     = -DSPEC_CPU_LP64
COPTIMIZE        = -opt-prefetch -ansi-alias -auto-ilp32
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FAST) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FAST) -prof-use
PASS1_LDOPT      =
PASS2_LDOPT      =

403.gcc=peak=default:
COPTIMIZE        = $(FASTNOSTATIC)
feedback=0

429.mcf=peak=default:
####################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################

445.gobmk=peak=default:
COPTIMIZE        = -O2 -ipo -no-prec-div -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use
PASS1_LDOPT=
PASS2_LDOPT=

456.hmmer=peak=default:
CC               = icc -m64
CPORTABILITY     = -DSPEC_CPU_LP64
COPTIMIZE        = $(FASTNOSTATIC) -unroll2 -auto-ilp32
feedback=no
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

458.sjeng=peak=default:
CC               = icc -m64
CPORTABILITY     = -DSPEC_CPU_LP64
COPTIMIZE        = -unroll4 -auto-ilp32
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

462.libquantum=peak=default:
CC               = icc -m64
CPORTABILITY     = -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX
basepeak=yes
feedback=no
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

464.h264ref=peak=default:
COPTIMIZE        = -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE      = -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
CXX              = icpc -m64
CXXPORTABILITY   = -DSPEC_CPU_LP64
EXTRA_LIBS       = -L$(SMARTHEAP64_DIR) -lsmartheap64
CXXOPTIMIZE      = -ansi-alias -opt-ra-region-strategy=routine
basepeak=yes

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default=default:
COPTIMIZE=       -auto-ilp32
CXXOPTIMIZE=     -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  $(FASTNOSTATIC) -prof-use

410.bwaves=peak=default:
OPTIMIZE= -static

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -scalar-rep- -static

433.milc=peak=default:
OPTIMIZE= -static

434.zeusmp=peak=default:
basepeak=yes

435.gromacs=peak=default:
OPTIMIZE= -opt-prefetch -static

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
OPTIMIZE=     $(FASTNOSTATIC)
feedback=no
copies=80
submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command

444.namd=peak=default:
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
OPTIMIZE= -static

450.soplex=peak=default:
PORTABILITY =
CXX= icpc -m32
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT
copies=80
submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command

453.povray=peak=default:
CXXOPTIMIZE= -unroll4  -ansi-alias

454.calculix=peak=default:
basepeak=yes

459.GemsFDTD=peak=default:
basepeak=yes

465.tonto=peak=default:
OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3
copies=80
submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command

470.lbm=peak=default:
OPTIMIZE= -opt-malloc-options=3 -ansi-alias -opt-prefetch -static

481.wrf=peak=default:
basepeak=yes

482.sphinx3=peak=default:
PORTABILITY=
CC= icc -m32
OPTIMIZE= $(FASTNOSTATIC)
COPTIMIZE= -unroll2
feedback=no
copies=80
submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 9006
test_sponsor     = NEC Corporation
hw_avail         = Nov-2011
sw_avail         = May-2011
tester           = NEC Corporation
hw_cpu_name      = Intel Xeon E7-8870
hw_cpu_char      = Intel Turbo Boost Technology up to 2.80 GHz
hw_cpu_mhz       = 2400
hw_disk          = 2x300 GB SAS, 10000 RPM, RAID 0
hw_fpu           = Integrated
hw_memory        = 256 GB (64 x 4 GB 2Rx4 PC3-8500R-7, ECC)
hw_model         = Express5800/A1080a-D (Intel Xeon E7-8870)
hw_ncpuorder     = 1,2,3,4 chips
hw_ncores        = 40
hw_nchips        = 4
hw_ncoresperchip = 10
hw_nthreadspercore = 2
hw_other         = None
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 30 MB I+D on chip per chip
hw_ocache        = None
hw_vendor        = NEC Corporation
prepared_by      = NEC Corporation
sw_os000         = Red Hat Enterprise Linux Server release 6.1,
sw_os001         = Kernel 2.6.32-131.0.15.el6.x86_64 on an x86_64
sw_file = ext4
sw_state         = Run level 3 (multi-user)
notes_submit_000 = numactl was used to bind copies to the cores

#The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = NEC-platform-linux64-revA.xml
flagsurl001 = Intel-ic12.0-linux64-revB.xml
notes_plat_000   = Patrol Scrubbing set to disabled in Maintenance Console
notes_os_000     = 'ulimit -s unlimited' was used to set the stack size to unlimited prior to run
notes_os_005     = echo 1 > /proc/sys/vm/zone_reclaim_mode
notes_os_010 = Huge pages were not configured for this run

int=default=default=default:
sw_compiler000   = C/C++: Version 12.0.4.191 of Intel Compiler XE
sw_compiler001   = for applications on IA-32 Build 20110427
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit
sw_other000      = Microquill SmartHeap V9.01

fp=default=default=default:
sw_compiler001   = Intel C++ Compiler XE 12.0
sw_compiler002   = Intel Visual Fortran Compiler XE 12.0
sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other000      = Binaries compiled on RHEL5.6




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic12.0-linux64-revB.20110705.xml
flagsurl001 = http://www.spec.org/cpu2006/flags/NEC-platform-linux64-revB.xml
notes_000 = The Express5800/A1080a-S and the Express5800/A1080a-D models are electronically equivalent.
notes_005 = The results have been measured on the Express5800/A1080a-S model.
notes_010 = Binaries were compiled on RHEL 5.6