# Invocation command line:
# /spec-ngz/cpu2006/bin/runspec -c nov18b-rate --define platform=M9000 --nobuild --reportable --rate fp --nopreenv --note-preenv
# output_root was not used for this run
############################################################################
### Platform ##############################################################
#
# Search for 'platform' to see how this is used and possible settings.
# To build one set of binaries that will be pretty good on all SPARC64-VII+,
# you could set this to 'generic'.
#
# NOTICE that a key difference among platforms is use of autopar.  So,
# you need to observe what this variable does for autopar, and you need
# to set the number of copies accordingly.
#
%if defined(%{platform})
%   define suffix rate-%{platform}
%else
%   error "please use --define platform"
%endif
##########################################################################

ext                 = nov18b-%{suffix}

flagsurl000         = http://www.spec.org/cpu2006/flags/Oracle-Solaris-Studio12.2-SPARC.20101221.xml
tune                = all
iterations          = 1        # in a real run, would be 3 or more
expand_notes        = 1
ignore_errors       = 1
log_line_width      = 4090     # to avoid choking vi
output_format       = asc,cfgfile,csv,html
mean_anyway         = 1
#minimize_rundirs   = 1
#minimize_builddirs = 1
preenv              = 1

#######################  Processor usage #######################
# Note that the first instance of a "named section" will
# probably occur with the "include" just below.  Therefore,
# any variables that belong in the header section should be above
# this point.

makeflags           = -j32   # how many jobs specmake should spawn
XJOBS               = 32     # how many CPUs ipo can use (at link time)

use_submit_for_speed = 1  # needed to bind the primary thread
command_add_redirect = 1  # useful with submit
submit = echo 'pbind -b $BIND \$\$ >> pbind.out; $command' > dobmk; sh dobmk

#include: $[top]/config/BIND-rate.inc
#  ----- Begin inclusion of '/spec-ngz/cpu2006/config/BIND-rate.inc'
############################################################################
# m9000 64 chip rate

parallel_setup         = 36
parallel_setup_prefork = pbind -b $BIND $$

# At the moment, the only auotpar bmark on M9000 is 410.bwaves, which likes
# running 16 copies with 16 threads apiece.  Do not try to do SUNW_MP_PROCBIND
# since we are running multiple copies of an autopar bmark.
preENV_OMP_NUM_THREADS  = 16
preENV_SUNW_MP_THR_IDLE = SPIN

%ifndef %{OverRideCopies}
   #
   # To cause the command line to win for both base and peak, say:
   #
   #       runspec --define OverRideCopies --rate n
   #
   # If you _don't_ say that, then the order of precedence is:
   #
   #      named section (highest), about 6 lines down, peak for several benchmarks
   #      command line
   #      the line marked "header section default" just below
   #
   copies           = 511     # header section default
410.bwaves=peak:
   copies           = 16
433.milc,470.lbm,482.sphinx3=peak:
   copies           = 127
450.soplex,436.cactusADM,437.leslie3d,481.wrf=peak:
   copies           = 255
401.bzip2=peak:
   copies           = 256
%endif

default:

# In the bind statement below, the order of assignment is to work
# from high to low, alternating LSBs, chips, cores, threads, from
# highest to lowest.  The order is derived from the 'prtdiag'
# description of the machine.
bind = <<EOT
511 479 447 415 383 351 319 287 255 223 191 159 127  95  63  31 503 471 439 407 375 343 311 279 247 215 183 151 119  87  55  23 495 463 431 399 367 335 303 271 239 207 175 143 111  79  47  15 487 455 423 391 359 327 295 263 231 199 167 135 103  71  39   7
509 477 445 413 381 349 317 285 253 221 189 157 125  93  61  29 501 469 437 405 373 341 309 277 245 213 181 149 117  85  53  21 493 461 429 397 365 333 301 269 237 205 173 141 109  77  45  13 485 453 421 389 357 325 293 261 229 197 165 133 101  69  37   5
507 475 443 411 379 347 315 283 251 219 187 155 123  91  59  27 499 467 435 403 371 339 307 275 243 211 179 147 115  83  51  19 491 459 427 395 363 331 299 267 235 203 171 139 107  75  43  11 483 451 419 387 355 323 291 259 227 195 163 131  99  67  35   3
505 473 441 409 377 345 313 281 249 217 185 153 121  89  57  25 497 465 433 401 369 337 305 273 241 209 177 145 113  81  49  17 489 457 425 393 361 329 297 265 233 201 169 137 105  73  41   9 481 449 417 385 353 321 289 257 225 193 161 129  97  65  33   1
510 478 446 414 382 350 318 286 254 222 190 158 126  94  62  30 502 470 438 406 374 342 310 278 246 214 182 150 118  86  54  22 494 462 430 398 366 334 302 270 238 206 174 142 110  78  46  14 486 454 422 390 358 326 294 262 230 198 166 134 102  70  38   6
508 476 444 412 380 348 316 284 252 220 188 156 124  92  60  28 500 468 436 404 372 340 308 276 244 212 180 148 116  84  52  20 492 460 428 396 364 332 300 268 236 204 172 140 108  76  44  12 484 452 420 388 356 324 292 260 228 196 164 132 100  68  36   4
506 474 442 410 378 346 314 282 250 218 186 154 122  90  58  26 498 466 434 402 370 338 306 274 242 210 178 146 114  82  50  18 490 458 426 394 362 330 298 266 234 202 170 138 106  74  42  10 482 450 418 386 354 322 290 258 226 194 162 130  98  66  34   2
504 472 440 408 376 344 312 280 248 216 184 152 120  88  56  24 496 464 432 400 368 336 304 272 240 208 176 144 112  80  48  16 488 456 424 392 360 328 296 264 232 200 168 136 104  72  40   8 480 448 416 384 352 320 288 256 224 192 160 128  96  64  32   0
EOT


# ---- End inclusion of '/spec-ngz/cpu2006/config/BIND-rate.inc'

#################### Compiler invocation ####################################

default=default=default=default:

%define compiler_showversion  1
%define compiler_verbose      1

%ifdef %{compiler_showversion}
    CVERBOSE   = -V
    CXXVERBOSE = -verbose=version
    FCVERBOSE  = -V
%endif
%ifdef %{compiler_verbose}
    CVERBOSE   = -V -\#
    CXXVERBOSE = -verbose=diags,version
    FCVERBOSE  = -V -v
%endif

SPECLANG = /export/solstudio12.2/bin/
CC  = $(SPECLANG)cc  -xjobs=$(XJOBS) $(CVERBOSE)
CXX = $(SPECLANG)CC  -xjobs=$(XJOBS) $(CXXVERBOSE)
FC  = $(SPECLANG)f90 -xjobs=$(XJOBS) $(FCVERBOSE)

AUTOPAR     = -xautopar -xreduction

###########################################################################
#### Allow Choice of libCstd, STLport4, or Apache Standard C++ Library ####
###########################################################################

##### Warning ######
# The flags EXTRA_CXXFLAGS and EXTRA_CXXLIBS are used for library selection.
# Do not use them for other purposes elsewhere in this config file, because
# it would be too easy to accidentally get them out of sync.  The manpage
# says:
#          If you compile and link in separate steps, the set of
#          -library options that appear in the compile command
#          must appear in the link command.
# So, these two flags are reserved for this section of the config file, and
# are always set together

default:
APACHE_INCL     = /export/home/apache/stdcxx-4.2.1/include
APACHE_BLD_INCL = /export/home/apache/stdcxx-4.2.1/build/include
APACHE_LIBDIR   = /export/home/apache/stdcxx-4.2.1/build/lib
APACHE_LIB      = std8d

APACHE_EXTRA_CXXFLAGS = -library=no%Cstd -I$(APACHE_INCL) -I$(APACHE_BLD_INCL)
APACHE_EXTRA_CXXLIBS  = -library=no%Cstd -L$(APACHE_LIBDIR) -R$(APACHE_LIBDIR) -l$(APACHE_LIB)

default:
EXTRA_CXXFLAGS  = -library=stlport4
EXTRA_CXXLIBS   = -library=stlport4

# fp base - enable next 3 lines for stdcxx in base, or comment out to use stlport4
fp=base:
EXTRA_CXXFLAGS  = $(APACHE_EXTRA_CXXFLAGS)
EXTRA_CXXLIBS   = $(APACHE_EXTRA_CXXLIBS)

# control deal peak here; deal base is controlled above with rest of fp base
447.dealII=peak:
EXTRA_CXXFLAGS  = $(APACHE_EXTRA_CXXFLAGS)
EXTRA_CXXLIBS   = $(APACHE_EXTRA_CXXLIBS)

# Apply the alternate source unconditionally.  It is harmless (and legal) whether apache is used or not.
447.dealII:
srcalt          = apache_stdcxx_4_2_1

# 453.povray likes the default library.  Change it only in peak, of course, since
# base has to be compiled consistently.
453.povray=peak:
EXTRA_CXXFLAGS  =
EXTRA_CXXLIBS   =
# Reminder: the above two flags, EXTRA_CXXFLAGS and EXTRA_CXXLIBs, must be consistent.
# See warning at top of this section.


#################### Base Int #########################
int=base:
OPTIMIZE     =  -fast -fma=fused -xipo=2 -xpagesize=4M
COPTIMIZE    = -xalias_level=std
CXXOPTIMIZE  = -xalias_level=compatible -xdepend
OPTIMIZATION_CXXLIBS = -lfast

EXTRA_CLIBS   = -ll2amm

#################### Peak Int #########################
int=peak:
OPTIMIZE        = -fast -xpagesize=4M
CXXOPTIMIZE     = -xalias_level=compatible -xdepend

400.perlbench=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=1 -xalias_level=std -xrestrict -Xc -xO4 -xprefetch=latx:0.5
EXTRA_LIBS      = -lfast
EXTRA_LDFLAGS   = -M /usr/lib/ld/map.bssalign

401.bzip2=peak:
EXTRA_OPTIMIZE  = -fma=fused -xalias_level=strong -xchip=generic

403.gcc=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xalias_level=std -xprefetch=no -xarch=sparcfmaf
EXTRA_LIBS      = -ll2amm

429.mcf=peak:
EXTRA_OPTIMIZE  = -xipo=2 -xprefetch_auto_type=indirect_array_access -xchip=generic -xlinkopt -W2,-Apf:llist=3:noinnerllist
EXTRA_LIBS      = -lfast

445.gobmk=peak:
EXTRA_OPTIMIZE  = -fma=fused -xalias_level=std -xrestrict -xlinkopt -xprefetch=no%auto -xunroll=6 -lfast
EXTRA_LIBS      = -ll2amm

456.hmmer=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2

458.sjeng=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xO4 -xlinkopt -xprefetch=no%auto
EXTRA_CLIBS   = -ll2amm

462.libquantum=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xprefetch=no
EXTRA_CLIBS     = -lbsdmalloc
feedback=0

464.h264ref=peak:
EXTRA_OPTIMIZE  = -xipo=2 -xarch=sparcfmaf -xalias_level=std -xprefetch=no
EXTRA_LIBS      = -ll2amm

471.omnetpp=peak:
%if '%{platform}' eq 'M9000'
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -Qoption cg -Qlp-av=0 -xprefetch_level=2 -xprefetch=latx:1.5
EXTRA_LIBS = -ll2amm
%else
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -Qoption cg -Qlp-av=0 -xO4
EXTRA_LIBS      = -lfast
%endif

473.astar=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xprefetch=no%auto
EXTRA_LIBS      = -lfast -lbsdmalloc
EXTRA_LDFLAGS   = -M /usr/lib/ld/map.bssalign

483.xalancbmk=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xprefetch=no -xO4
EXTRA_LIBS      = -lfast

#################### Base FP #########################

fp=base:
%if '%{platform}' eq 'M9000'
OPTIMIZE	= -fast -fma=fused -xipo=2 -xpagesize=4M -xlinkopt -xvector
COPTIMIZE	= -xalias_level=std -xprefetch_auto_type=indirect_array_access
CXXOPTIMIZE	= -xalias_level=compatible  -xdepend
EXTRA_LIBS	= -ll2amm
%else
OPTIMIZE        = -fast -fma=fused -xipo=2 -xpagesize=4M
COPTIMIZE       = -xalias_level=std -xprefetch_auto_type=indirect_array_access -xprefetch_level=3 -fsimple=1
CXXOPTIMIZE     = -xalias_level=compatible -xdepend -xprefetch=latx:0.5
%endif

#################### Peak FP ############################

fp=peak:
OPTIMIZE        = -fast -xpagesize=4M
CXXOPTIMIZE     = -xalias_level=compatible -xdepend

410.bwaves=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2
%if '%{platform}' eq 'M9000'
FOPTIMIZE      = $(AUTOPAR)
submit         =
%else
feedback        = 0
%endif

416.gamess=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xprefetch=no%auto -xO3

433.milc=peak:
%if '%{platform}' eq 'M9000'
EXTRA_OPTIMIZE	= -fma=fused -xipo=2 -xprefetch_level=2 -xprefetch_auto_type=indirect_array_access -xalias_level=strong -xdepend
EXTRA_LIBS = -ll2amm
feedback	= 0
%else
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xprefetch_level=2 -xprefetch_auto_type=indirect_array_access -xalias_level=std -fsimple=1 -W2,-Ainline:rs=400
feedback        = 0
%endif

434.zeusmp=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xprefetch_level=1 -ll2amm -xunroll=5
feedback        = 0

435.gromacs=peak:
EXTRA_OPTIMIZE  = -fma=fused -xtarget=generic -xinline= -fsimple=0 -xlinkopt -xvector -xdepend

436.cactusADM=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2
feedback        = 0

437.leslie3d=peak:
EXTRA_OPTIMIZE  = -xprefetch=no
feedback        = 0
EXTRA_LDFLAGS   = -M /usr/lib/ld/map.bssalign

444.namd=peak:
CXXOPTIMIZE	= -xalias_level=any -xdepend
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xchip=generic -xunroll=2

447.dealII=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xprefetch=latx:0.5
feedback        = 0

450.soplex=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xdepend -xrestrict -xprefetch=no -xalias_level=compatible
EXTRA_LIBS = -ll2amm

453.povray=peak:
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xdepend -xlinkopt=2 -xprefetch=no -xunroll=4 -xO4
EXTRA_LIBS      = -lfast

454.calculix=peak:
EXTRA_COPTIMIZE = -xalias_level=std
%if '%{platform}' eq 'M9000'
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xvector -xunroll=8 -xprefetch=latx:3
%else
EXTRA_OPTIMIZE  = -fma=fused -xipo=2 -xvector -xprefetch=latx:3
%endif

459.GemsFDTD=peak:
EXTRA_OPTIMIZE  = -fma=fused

465.tonto=peak:
EXTRA_OPTIMIZE  = -xipo=2 -xprefetch=no
EXTRA_LIBS      = -lfast -ll2amm

470.lbm=peak:
%if '%{platform}' eq 'M9000' || '%{platform}' eq 'M4000'
# Just use fp=peak.  In this case, over in the BIND include file, the number of
# copies should be set to some large number, such as 2x the number of chips.
%else
# We want autopar - set the BIND include file to run 1 copy
EXTRA_OPTIMIZE = -fma=fused -xipo=2 -xprefetch_level=3 -xvector -xarch=generic $(AUTOPAR)
feedback = 0
%endif

481.wrf=peak:
%if '%{platform}' eq 'M9000'
EXTRA_OPTIMIZE	= -fma=fused -xipo=2 -xprefetch=no -xcache=generic
EXTRA_LIBS      = -ll2amm
%else
EXTRA_OPTIMIZE	= -fma=fused -xipo=2 -xprefetch_level=3  -xprefetch_auto_type=indirect_array_access
EXTRA_LIBS      = -ll2amm
%endif

482.sphinx3=peak:
EXTRA_OPTIMIZE	= -fma=fused -xipo=2 -xinline= -xalias_level=strong -xprefetch_level=2
EXTRA_LIBS      = -lfast -ll2amm


###################### Portability #################################

400.perlbench:
CPORTABILITY = -DSPEC_CPU_SOLARIS_SPARC

403.gcc:
CPORTABILITY = -DSPEC_CPU_SOLARIS

462.libquantum:
CPORTABILITY=-DSPEC_CPU_SOLARIS

483.xalancbmk:
CXXPORTABILITY=-DSPEC_CPU_SOLARIS

###################### Profile Feedback #################################
#
# By default, turns on feedback for everything
#
default=default=default=default:

fdo_pre0    =    rm -rf ./feedback.profile ./SunWS_cache

PASS1_CFLAGS   =         -xprofile=collect:./feedback
PASS1_CXXFLAGS =         -xprofile=collect:./feedback
PASS1_FFLAGS   =         -xprofile=collect:./feedback
PASS1_LDFLAGS  =         -xprofile=collect:./feedback

PASS2_CFLAGS   =         -xprofile=use:./feedback
PASS2_CXXFLAGS =         -xprofile=use:./feedback
PASS2_FFLAGS   =         -xprofile=use:./feedback
PASS2_LDFLAGS  =         -xprofile=use:./feedback

default=default=default=default:

sw_compiler    = Oracle Solaris Studio 12.2

notes_comp_000 = Oracle Solaris Studio 12.2 is distributed with mandatory OS patches
notes_comp_005 =  118683-05  119963-20  120753-08
notes_comp_010 = Oracle Solaris Studio 12.2 and patches are available at
notes_comp_015 =  http://oracle.com/goto/solarisstudio

fp=default:
notes_comp_020 =
notes_comp_025 =The Apache C++ Standard Library V4.2.1 was installed from
notes_comp_030 =   http://stdcxx.apache.org/download.html using:
notes_comp_035 =     alias gmake=specmake
notes_comp_040 =     gmake BUILDTYPE=8d CONFIG=sunpro.config

default:
notes_submit_000 =
notes_submit_005 = Processes were assigned to specific processors using 'pbind'
notes_submit_010 = commands.  The config file option 'submit' was used, along
notes_submit_015 = with a list of processors in the 'BIND' variable, to generate
notes_submit_020 = the pbind commands.  (For details, please see the config file.)
notes_submit_025 =


default=default=default=default:
#include: $[top]/config/SUT.inc
#  ----- Begin inclusion of '/spec-ngz/cpu2006/config/SUT.inc'
############################################################################
default=default=default=default:

hw_avail           = Dec-2010
hw_cpu_mhz         = 3000
hw_cpu_name        = SPARC64 VII+
hw_disk000         = 602 GB on 24 x 73 GB 10K RPM SAS
hw_disk001         = disks, arranged as 8 x 3-way mirrors
hw_fpu             = Integrated
hw_memory          = 2 TB (512 x 4 GB, 8-way interleaved)
hw_model           = SPARC Enterprise M9000
hw_nchips          = 64
hw_ncores          = 256
hw_ncoresperchip   = 4
hw_ncpuorder       = 1 to 16 CMUs; each CMU contains 2 or 4 CPU chips
hw_nthreadspercore = 2
hw_ocache          = None
hw_other           = None
hw_pcache          = 64 KB I + 64 KB D on chip per core
hw_scache          = 12 MB I+D on chip per chip
hw_tcache          = None
hw_vendor          = Oracle Corporation
tester             = Oracle Corporation
test_sponsor       = Oracle Corporation
license_num        = 6
sw_avail           = Sep-2010
sw_base_ptrsize    = 32-bit
sw_file            = zfs
sw_os              = Oracle Solaris 10 9/10
sw_other           = None
sw_peak_ptrsize    = 32-bit
sw_state           = Default

notes_plat_000     =
notes_plat_005     = Memory is 8-way interleaved by filling all slots with
notes_plat_010     = the same capacity DIMMs.
notes_plat_015     =
notes_plat_020     = This result is measured on a SPARC Enterprise M9000 server from
notes_plat_025     = Oracle.  The SPARC Enterprise M9000 server from Oracle and from
notes_plat_030     = Fujitsu are electrically equivalent.

notes_os_shell_000 = ulimit -s 131072 was used to limit the space
notes_os_shell_005 = consumed by the stack (and therefore make more
notes_os_shell_010 = space available to the heap).
notes_os_sys_000 =
notes_os_sys_005 =  /etc/system parameters
notes_os_sys_010 =     autoup=600
notes_os_sys_015 =        Causes pages older than the listed number of seconds to
notes_os_sys_020 =        be written by fsflush.
notes_os_sys_025 =     tune_t_fsflushr=10
notes_os_sys_030 =        Controls how many seconds elapse between runs of the
notes_os_sys_035 =        page flush daemon, fsflush.
notes_os_sys_040 =     lpg_alloc_prefer=1
notes_os_sys_045 =         Indicates that extra effort should be taken to ensure
notes_os_sys_050 =         that pages are created in the nearby lgroup (NUMA location).
notes_os_sys_055 =     kernel_cage_enable=0
notes_os_sys_060 =        Allows the kernel to use memory in any locality group.
notes_os_sys_065 =        In particular, allows ZFS file caches to be located on
notes_os_sys_070 =        any memory board.
notes_os_sys_075 =     zfs:zfs_arc_min=0x10000000
notes_os_sys_080 =     zfs:zfs_arc_max=0x10000000000
notes_os_sys_085 =        Limits the consumption of memory by the zfs file system
notes_os_sys_090 =        cache to 1 TB.  (The arc_max sets the maximum cache
notes_os_sys_095 =        size; arc_min sets the minimum.)
notes_os_sys_100 =  The "webconsole" service was turned off using
notes_os_sys_105 =      svcadm disable webconsole
notes_os_sys_110 =  The system had 137 GB of swap space.
# ---- End inclusion of '/spec-ngz/cpu2006/config/SUT.inc'




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.

447.dealII:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


410.bwaves:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

default:
notes_000 =
notes_005 =447.dealII (peak): "apache_stdcxx_4_2_1" src.alt was used.
notes_010 =447.dealII (base): "apache_stdcxx_4_2_1" src.alt was used.
notes_015 =