# Invocation command line:
# /SPECcpu2006/bin/runspec --rate 12 -c cpu2006.1.1.ic11.1.linux64.sse42.rate.jan182010.cfg --flagsurl=Intel-ic11.1-linux64-revE.xml --define up-wsm-6c --define smt-on --define physicalfirst -T all -o asc,pdf int
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       Intel Compiler 11.1
#      Operating system version:    64-Bit SUSE LINUX Enterprise Server 10 or later
#      Hardware:                    Intel processors supporting SSE4.2
#
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# Sep 2009 IC 11.1 Linux64
############################################################################
action      = validate
tune        = base
ext         = cpu2006.1.1.ic11.1.linux64.sse42.rate.jan182010
PATHSEP     = /
check_md5=1
reportable=1
bench_post_setup=sync

#
# These are listed as benchmark-tuning-extension-machine
#
int=default=default=default:
CC=  icc  -m32
CXX= icpc -m32
OBJ = .o
SMARTHEAP32_DIR = /home/cmplr/usr3/alrahate/cpu2006.1.1.ic11.1/libic11.1-32bit
SMARTHEAP64_DIR = /home/cmplr/usr3/alrahate/cpu2006.1.1.ic11.1/libic11.1-64bit

fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

# For UP systems, we need to know if the processors are ordered across cores first or in order
# If across cores, processors 0, 1, 2 and 3 are on distinct physical cores
# Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores

default:
submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command

%ifdef %{no-numa}
submit       = taskset -c $SPECCOPYNUM $command
%endif

####################################################################
# Compiler options
# for Nehalem use -xSSE4.2
# for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3
####################################################################
default:
SSE          = -xSSE4.2
FAST         =  $(SSE) -ipo -O3 -no-prec-div -static
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div

################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX


################################################################
# Tuning Flags
################################################################
#
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same
# flags are used in the same order for all benchmarks of a given language

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    $(FAST) -opt-prefetch
CXXOPTIMIZE=  $(FASTNOSTATIC)  -opt-prefetch

fp=base=default=default:
OPTIMIZE=     $(FAST)

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=       -auto-ilp32 -ansi-alias
CXXOPTIMIZE=     -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FAST) -prof-use
PASS1_CXXFLAGS   = -prof-gen
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FAST) -prof-use
PASS1_LDCXXFLAGS = -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
COPTIMIZE= -ansi-alias

401.bzip2=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -opt-prefetch -ansi-alias -auto-ilp32

403.gcc=peak=default:
COPTIMIZE = $(FAST)
feedback=0

429.mcf=peak=default:
COPTIMIZE= $(FAST) -opt-prefetch
feedback=0
####################################################################################################################################
%ifdef %{smt-on}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif

%ifdef %{up-dale}
copies=2
%endif
%ifdef %{up-nhm}
copies=4
%endif
%ifdef %{dp-nhm}
copies=8
%endif
%ifdef %{up-wsm-6c}
copies=6
%endif
%ifdef %{dp-wsm-6c}
copies=12
%endif
####################################################################################################################################

445.gobmk=peak=default:
COPTIMIZE= -O2 -ipo -no-prec-div -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE=  $(FAST) -unroll2 -ansi-alias -auto-ilp32
feedback=no
####################################################################################################################################
%ifdef %{smt-on}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif

%ifdef %{up-dale}
copies=2
%endif
%ifdef %{up-nhm}
copies=4
%endif
%ifdef %{dp-nhm}
copies=8
%endif
%ifdef %{up-wsm-6c}
copies=6
%endif
%ifdef %{dp-wsm-6c}
copies=12
%endif
####################################################################################################################################

458.sjeng=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -unroll4 -auto-ilp32

462.libquantum=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX
COPTIMIZE=    $(FAST) -auto-ilp32 -opt-prefetch
feedback=no

464.h264ref=peak=default:
COPTIMIZE= -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE=  -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
CXX= icpc -m64
CXXPORTABILITY= -DSPEC_CPU_LP64
EXTRA_LIBS=  -L$(SMARTHEAP64_DIR) -lsmartheap64
CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=routine

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32
CXXOPTIMIZE=     -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   $(FAST) -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FAST) -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   $(FAST) -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  $(FAST) -prof-use

410.bwaves=peak=default:
OPTIMIZE=    $(FAST)  -opt-prefetch
feedback=0
####################################################################################################################################
%ifdef %{smt-on}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif

%ifdef %{up-dale}
copies=2
%endif
%ifdef %{up-nhm}
copies=4
%endif
%ifdef %{dp-nhm}
copies=8
%endif
%ifdef %{up-wsm-6c}
copies=6
%endif
%ifdef %{dp-wsm-6c}
copies=12
%endif
%ifdef %{1p-nhm-ex}
copies=8
%endif
%ifdef %{2p-nhm-ex}
copies=16
%endif
%ifdef %{4p-nhm-ex}
copies=32
%endif
%ifdef %{4p-nhm-ex-6c}
copies=24
%endif
####################################################################################################################################

416.gamess=peak=default:
OPTIMIZE= -unroll2 -Ob0 -ansi-alias -scalar-rep-
####################################################################################################################################
%ifdef %{smt-on}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif

%ifdef %{up-dale}
copies=2
%endif
%ifdef %{up-nhm}
copies=4
%endif
%ifdef %{dp-nhm}
copies=8
%endif
%ifdef %{up-wsm-6c}
copies=6
%endif
%ifdef %{dp-wsm-6c}
copies=12
%endif
%ifdef %{1p-nhm-ex}
copies=8
%endif
%ifdef %{2p-nhm-ex}
copies=16
%endif
%ifdef %{4p-nhm-ex}
copies=32
%endif
%ifdef %{4p-nhm-ex-6c}
copies=24
%endif
####################################################################################################################################

433.milc=peak=default:
OPTIMIZE= -fno-alias -opt-prefetch
COPTIMIZE=

434.zeusmp=peak=default:
basepeak=yes

435.gromacs=peak=default:
OPTIMIZE= -opt-prefetch

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
OPTIMIZE=     $(FAST)
feedback=no
####################################################################################################################################
%ifdef %{smt-on}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif

%ifdef %{up-dale}
copies=2
%endif
%ifdef %{up-nhm}
copies=4
%endif
%ifdef %{dp-nhm}
copies=8
%endif
%ifdef %{up-wsm-6c}
copies=6
%endif
%ifdef %{dp-wsm-6c}
copies=12
%endif
%ifdef %{1p-nhm-ex}
copies=8
%endif
%ifdef %{2p-nhm-ex}
copies=16
%endif
%ifdef %{4p-nhm-ex}
copies=32
%endif
%ifdef %{4p-nhm-ex-6c}
copies=24
%endif
####################################################################################################################################

444.namd=peak=default:
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
CXXOPTIMIZE= -unroll2 -ansi-alias -scalar-rep-

450.soplex=peak=default:
PORTABILITY =
CXX= icpc -m32
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=
####################################################################################################################################
%ifdef %{smt-on}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif

%ifdef %{up-dale}
copies=2
%endif
%ifdef %{up-nhm}
copies=4
%endif
%ifdef %{dp-nhm}
copies=8
%endif
%ifdef %{up-wsm-6c}
copies=6
%endif
%ifdef %{dp-wsm-6c}
copies=12
%endif
####################################################################################################################################

453.povray=peak=default:
CXXOPTIMIZE= -unroll4 -ansi-alias

454.calculix=peak=default:
basepeak=yes

459.GemsFDTD=peak=default:
OPTIMIZE= -unroll2 -Ob0
####################################################################################################################################
%ifdef %{smt-on}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif

%ifdef %{up-dale}
copies=2
%endif
%ifdef %{up-nhm}
copies=4
%endif
%ifdef %{dp-nhm}
copies=8
%endif
%ifdef %{up-wsm-6c}
copies=6
%endif
%ifdef %{dp-wsm-6c}
copies=12
%endif
%ifdef %{1p-nhm-ex}
copies=8
%endif
%ifdef %{2p-nhm-ex}
copies=16
%endif
%ifdef %{4p-nhm-ex}
copies=32
%endif
%ifdef %{4p-nhm-ex-6c}
copies=24
%endif
####################################################################################################################################

465.tonto=peak=default:
OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3

470.lbm=peak=default:
OPTIMIZE= -opt-malloc-options=3 -ansi-alias
####################################################################################################################################
%ifdef %{smt-on}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif

%ifdef %{up-dale}
copies=2
%endif
%ifdef %{up-nhm}
copies=4
%endif
%ifdef %{dp-nhm}
copies=8
%endif
%ifdef %{up-wsm-6c}
copies=6
%endif
%ifdef %{dp-wsm-6c}
copies=12
%endif
%ifdef %{1p-nhm-ex}
copies=7
%endif
%ifdef %{2p-nhm-ex}
copies=14
%endif
%ifdef %{4p-nhm-ex}
copies=28
%endif
%ifdef %{4p-nhm-ex-6c}
copies=24
%endif
####################################################################################################################################

481.wrf=peak=default:
basepeak=yes

482.sphinx3=peak=default:
PORTABILITY=
CC= icc -m32
OPTIMIZE= $(FAST)
COPTIMIZE= -unroll2
feedback=no

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 19
test_sponsor     = Fujitsu
hw_avail         = Aug-2010
sw_avail         = Jan-2010
tester           = Fujitsu
hw_disk          = 1 x SAS, 300 GB, 10000 RPM
hw_other = None
hw_fpu           = Integrated
hw_ncpuorder     = 1,2 chips
hw_vendor        = Fujitsu
sw_file          = ext3
sw_os000         = SUSE Linux Enterprise Server 11 (x86_64) with SP1,
sw_os001         = Kernel 2.6.32.12-0.7-default
sw_state         = Run level 3 (multi-user)

notes_submit_000 = numactl was used to bind copies to the cores
%ifdef %{no-numa}
notes_submit_000 = taskset was used to bind copies to the cores
%endif
notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
notes_000        = For information about Fujitsu please visit: http://www.fujitsu.com
notes_005        = Binaries were compiled on SLES 10 with Binutils 2.18.50.0.7.20080502


default=default=default=default:

###################################################################################################
#
# Please note:
#
# - Each processor description starts with:                    #BEGIN CPUname
# - Each processor description ends   with:                    #END CPUname
# - optional half rate measurements: description starts with:  #HALFRATE
#                                                              always at the end of the processor description
#                                    and ends with :           #ENDHALFRATE
# - Token are always overwritten by the lastest definition!
# - Token which are the same for all CPUnames can be extracted to the general tokens above
# - for notes: only use notes between 500 and 998, all other indices are reserved by the general
#              description above
# - for PPL Entry: set the necessary tokens, starting with ##PPL....
#
####################################################################################################


#BEGIN E5503
#hw_cpu_name      = Intel Xeon E5503
#hw_cpu_char      =
#hw_cpu_mhz       = 2000
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon E5503, 2.0 GHz
#hw_ncores        = 4
#hw_nchips        = 2
#hw_ncoresperchip = 2
#hw_nthreadspercore = 1
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 4 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat_000   = The system automatically configures the memory to run at 800 MHz.

#HALFRATE
#hw_ncores        = 2
#hw_nchips        = 1
#hw_memory        = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 80
##PPLhyperthreading =
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END E5503

#BEGIN E5506
#hw_cpu_name      = Intel Xeon E5506
#hw_cpu_char      =
#hw_cpu_mhz       = 2133
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon E5506, 2.13 GHz
#hw_ncores        = 8
#hw_nchips        = 2
#hw_ncoresperchip = 4
#hw_nthreadspercore = 1
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 4 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat_000   = The system automatically configures the memory to run at 800 MHz.

#HALFRATE
#hw_ncores        = 4
#hw_nchips        = 1
#hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 80
##PPLhyperthreading =
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END E5506

#BEGIN E5507
#hw_cpu_name      = Intel Xeon E5507
#hw_cpu_char      =
#hw_cpu_mhz       = 2267
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon E5507, 2.26 GHz
#hw_ncores        = 8
#hw_nchips        = 2
#hw_ncoresperchip = 4
#hw_nthreadspercore = 1
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 4 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat_000   = The system automatically configures the memory to run at 800 MHz.

#HALFRATE
#hw_ncores        = 4
#hw_nchips        = 1
#hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 80
##PPLhyperthreading =
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END E5507

#BEGIN E5620
#hw_cpu_name      = Intel Xeon E5620
#hw_cpu_char      = Intel Turbo Boost Technology up to 2.67 GHz
#hw_cpu_mhz       = 2400
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon E5620, 2.40 GHz
#hw_ncores        = 8
#hw_nchips        = 2
#hw_ncoresperchip = 4
#hw_nthreadspercore = 2
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 12 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat_000   = The system automatically configures the memory to run at 1067 MHz.
#notes_plat010= BIOS configuration:
#notes_plat020= Data Reuse Optimization = Disable
#notes_plat030= Performance/Power Setting = Traditional
#HALFRATE
#hw_ncores        = 4
#hw_nchips        = 1
#hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 80
##PPLhyperthreading = H
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END E5620

#BEGIN E5630
#hw_cpu_name      = Intel Xeon E5630
#hw_cpu_char      = Intel Turbo Boost Technology up to 2.80 GHz
#hw_cpu_mhz       = 2533
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon E5630, 2.53 GHz
#hw_ncores        = 8
#hw_nchips        = 2
#hw_ncoresperchip = 4
#hw_nthreadspercore = 2
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 12 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat_000   = The system automatically configures the memory to run at 1067 MHz.
#notes_plat010= BIOS configuration:
#notes_plat020= Data Reuse Optimization = Disable
#notes_plat030= Performance/Power Setting = Traditional
#HALFRATE
#hw_ncores        = 4
#hw_nchips        = 1
#hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 80
##PPLhyperthreading = H
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END E5630

#BEGIN E5640
#hw_cpu_name      = Intel Xeon E5640
#hw_cpu_char      = Intel Turbo Boost Technology up to 2.93 GHz
#hw_cpu_mhz       = 2667
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon E5640, 2.67 GHz
#hw_ncores        = 8
#hw_nchips        = 2
#hw_ncoresperchip = 4
#hw_nthreadspercore = 2
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 12 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat_000   = The system automatically configures the memory to run at 1067 MHz.
#notes_plat010= BIOS configuration:
#notes_plat020= Data Reuse Optimization = Disable
#notes_plat030= Performance/Power Setting = Traditional
#HALFRATE
#hw_ncores        = 4
#hw_nchips        = 1
#hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 80
##PPLhyperthreading = H
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END E5640

#BEGIN X5650
hw_cpu_name      = Intel Xeon X5650
hw_cpu_char      = Intel Turbo Boost Technology up to 3.06 GHz
hw_cpu_mhz       = 2667
hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC)
hw_model         = PRIMERGY BX620 S6, Intel Xeon X5650, 2.67 GHz
hw_ncores        = 12
hw_nchips        = 2
hw_ncoresperchip = 6
hw_nthreadspercore = 2
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 12 MB I+D on chip per chip
hw_ocache        = None
prepared_by      = G. Petersen
notes_plat_000= BIOS configuration:
notes_plat_005= Data Reuse Optimization = Disable
notes_plat_010= Performance/Power Setting = Traditional
#HALFRATE
hw_ncores        = 6
hw_nchips        = 1
hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC)
#ENDHALFRATE

#PPLrelease =
#PPLprocessortype = P4X
#PPLcpucode = Glft
#PPLbusfreq =
#PPLslctype =
#PPLtdp = 95
#PPLhyperthreading = H
#PPLram = *
#PPLramtype = DDR3
#PPLdate = 01.08.2010
#PPLresponsible = PT
#PPLresulttype = M
#PPLverbench =
#PPLcompiler = Intel C++/Fortran Compiler 11.1
#PPLos = SUSE Linux SLES11 SP1 (x86_64)
#PPLapplication =
#PPLconfig =
#PPLremark =
#PPLiremark =
#END X5650

#BEGIN X5660
#hw_cpu_name      = Intel Xeon X5660
#hw_cpu_char      = Intel Turbo Boost Technology up to 3.20 GHz
#hw_cpu_mhz       = 2800
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon X5660, 2.80 GHz
#hw_ncores        = 12
#hw_nchips        = 2
#hw_ncoresperchip = 6
#hw_nthreadspercore = 2
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 12 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat010= BIOS configuration:
#notes_plat020= Data Reuse Optimization = Disable
#notes_plat030= Performance/Power Setting = Traditional
#HALFRATE
#hw_ncores        = 6
#hw_nchips        = 1
#hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 95
##PPLhyperthreading = H
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END X5660

#BEGIN X5670
#hw_cpu_name      = Intel Xeon X5670
#hw_cpu_char      = Intel Turbo Boost Technology up to 3.33 GHz
#hw_cpu_mhz       = 2933
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon X5670, 2.93 GHz
#hw_ncores        = 12
#hw_nchips        = 2
#hw_ncoresperchip = 6
#hw_nthreadspercore = 2
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 12 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat010= BIOS configuration:
#notes_plat020= Data Reuse Optimization = Disable
#notes_plat030= Performance/Power Setting = Traditional
#HALFRATE
#hw_ncores        = 6
#hw_nchips        = 1
#hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 95
##PPLhyperthreading = H
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END X5670

#BEGIN X5667
#hw_cpu_name      = Intel Xeon X5667
#hw_cpu_char      = Intel Turbo Boost Technology up to 3.46 GHz
#hw_cpu_mhz       = 3067
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon X5667, 3.07 GHz
#hw_ncores        = 8
#hw_nchips        = 2
#hw_ncoresperchip = 4
#hw_nthreadspercore = 2
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 12 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat010= BIOS configuration:
#notes_plat020= Data Reuse Optimization = Disable
#notes_plat030= Performance/Power Setting = Traditional
#HALFRATE
#hw_ncores        = 4
#hw_nchips        = 1
#hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 95
##PPLhyperthreading = H
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END X5667

#BEGIN L5609
#hw_cpu_name      = Intel Xeon L5609
#hw_cpu_char      =
#hw_cpu_mhz       = 1867
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon L5609, 1.87 GHz
#hw_ncores        = 8
#hw_nchips        = 2
#hw_ncoresperchip = 4
#hw_nthreadspercore = 1
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 12 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat_000   = The system automatically configures the memory to run at 1067 MHz.
#notes_plat010= BIOS configuration:
#notes_plat020= Data Reuse Optimization = Disable
#HALFRATE
#hw_ncores        = 4
#hw_nchips        = 1
#hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 40
##PPLhyperthreading =
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END L5609

#BEGIN L5630
#hw_cpu_name      = Intel Xeon L5630
#hw_cpu_char      = Intel Turbo Boost Technology up to 2.40 GHz
#hw_cpu_mhz       = 2133
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon L5630, 2.13 GHz
#hw_ncores        = 8
#hw_nchips        = 2
#hw_ncoresperchip = 4
#hw_nthreadspercore = 2
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 12 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat_000   = The system automatically configures the memory to run at 1067 MHz.
#notes_plat010= BIOS configuration:
#notes_plat020= Data Reuse Optimization = Disable
#notes_plat030= Performance/Power Setting = Traditional
#HALFRATE
#hw_ncores        = 4
#hw_nchips        = 1
#hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC, see add'l detail in notes)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 40
##PPLhyperthreading = H
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END L5630

#BEGIN L5640
#hw_cpu_name      = Intel Xeon L5640
#hw_cpu_char      = Intel Turbo Boost Technology up to 2.80 GHz
#hw_cpu_mhz       = 2267
#hw_memory        = 48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC)
#hw_model         = PRIMERGY BX620 S6, Intel Xeon L5640, 2.27 GHz
#hw_ncores        = 12
#hw_nchips        = 2
#hw_ncoresperchip = 6
#hw_nthreadspercore = 2
#hw_pcache        = 32 KB I + 32 KB D on chip per core
#hw_scache        = 256 KB I+D on chip per core
#hw_tcache        = 12 MB I+D on chip per chip
#hw_ocache        = None
#prepared_by      = G. Petersen
#notes_plat010= BIOS configuration:
#notes_plat020= Data Reuse Optimization = Disable
#notes_plat030= Performance/Power Setting = Traditional
#HALFRATE
#hw_ncores        = 6
#hw_nchips        = 1
#hw_memory         = 24 GB (6x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC)
#ENDHALFRATE

##PPLrelease =
##PPLprocessortype = P4X
##PPLcpucode = Glft
##PPLbusfreq =
##PPLslctype =
##PPLtdp = 60
##PPLhyperthreading = H
##PPLram = *
##PPLramtype = DDR3
##PPLdate = 01.08.2010
##PPLresponsible = PT
##PPLresulttype = M
##PPLverbench =
##PPLcompiler = Intel C++/Fortran Compiler 11.1
##PPLos = SUSE Linux SLES11 SP1 (x86_64)
##PPLapplication =
##PPLconfig =
##PPLremark =
##PPLiremark =
#END L5640

int=default=default=default:
sw_compiler000   = Intel C++ Professional Compiler for IA32 and
sw_compiler001 = Intel 64, Version 11.1
sw_compiler002   = Build 20091130 Package ID: l_cproc_p_11.1.064
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit
sw_other         = Microquill SmartHeap V8.1


fp=default=default=default:
sw_compiler001   = Intel C++ and Fortran Professional Compiler for IA32 and Intel 64, Version  11.1
sw_compiler002   = Build 20091130 Package ID: l_cproc_p_11.1.064, l_cprof_p_11.1.064
sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other         = None




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.

462.libquantum:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


403.gcc:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

default:
flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic11.1-linux64-revE.20100708.xml