# Invocation command line:
# /SPEC/cpu2006-1.1/bin/runspec --rate 128 -c RX900.cfg --flagsurl RX900_flags.xml -n 3 -T all -o asc fp
# output_root was not used for this run
############################################################################
############################################################################
############################################################################
# SPEC CPU2006 Intel Linux64 config file
############################################################################
action      = validate
tune        = all
ext         = icc111069
PATHSEP     = /
check_md5=1
reportable=1
bench_post_setup=sync

int=default=default=default:
CC=  icc  -m32
CXX= icpc -m32
OBJ = .o
SMARTHEAP32_DIR = /opt/SmartHeap_9/lib
SMARTHEAP64_DIR = /opt/SmartHeap_9_64/lib

fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

default:
submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command

####################################################################
# Compiler options
####################################################################
default:
SSE          = -xSSE4.2
FAST         =  $(SSE) -ipo -O3 -no-prec-div -static
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div

####################################################################
# portability & libraries
####################################################################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX


################################################################
# Tuning Flags
################################################################

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    $(FAST) -opt-prefetch
CXXOPTIMIZE=  $(FASTNOSTATIC)  -opt-prefetch

fp=base=default=default:
OPTIMIZE=     $(FAST)

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=       -auto-ilp32 -ansi-alias
CXXOPTIMIZE=     -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FAST) -prof-use
PASS1_CXXFLAGS   = -prof-gen
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FAST) -prof-use
PASS1_LDCXXFLAGS = -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
COPTIMIZE= -ansi-alias

401.bzip2=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -opt-prefetch -ansi-alias -auto-ilp32

403.gcc=peak=default:
COPTIMIZE = $(FAST)
feedback=0

429.mcf=peak=default:
COPTIMIZE= $(FAST) -opt-prefetch
feedback=0
####################################################################################################

445.gobmk=peak=default:
COPTIMIZE= -O2 -ipo -no-prec-div -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE=  $(FAST) -unroll2 -ansi-alias -auto-ilp32
feedback=no
#########################################################################################################

458.sjeng=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -unroll4 -auto-ilp32

462.libquantum=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX
COPTIMIZE=    $(FAST) -auto-ilp32 -opt-prefetch
feedback=no

464.h264ref=peak=default:
COPTIMIZE= -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE=  -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
CXX= icpc -m64
CXXPORTABILITY= -DSPEC_CPU_LP64
EXTRA_LIBS=  -L$(SMARTHEAP64_DIR) -lsmartheap64
CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=routine

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32
CXXOPTIMIZE=     -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   $(FAST) -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FAST) -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   $(FAST) -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  $(FAST) -prof-use

410.bwaves=peak=default:
OPTIMIZE=    $(FAST)  -opt-prefetch
feedback=0

416.gamess=peak=default:
OPTIMIZE= -unroll2 -Ob0 -ansi-alias -scalar-rep-

433.milc=peak=default:
OPTIMIZE= -fno-alias -opt-prefetch
COPTIMIZE=

434.zeusmp=peak=default:
basepeak=yes

435.gromacs=peak=default:
OPTIMIZE= -opt-prefetch

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
OPTIMIZE=     $(FAST)
feedback=no

444.namd=peak=default:
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
CXXOPTIMIZE= -unroll2 -ansi-alias -scalar-rep-

450.soplex=peak=default:
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=

453.povray=peak=default:
CXXOPTIMIZE= -unroll4 -ansi-alias

454.calculix=peak=default:
basepeak=yes

459.GemsFDTD=peak=default:
OPTIMIZE= -unroll2 -Ob0
####################################################################################################################################
####################################################################################################################################

465.tonto=peak=default:
OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3

470.lbm=peak=default:
OPTIMIZE= -opt-malloc-options=3 -ansi-alias
####################################################################################################################################

481.wrf=peak=default:
basepeak=yes

482.sphinx3=peak=default:
OPTIMIZE= $(FAST)
COPTIMIZE= -unroll2
feedback=no

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 19
test_sponsor     = Fujitsu
hw_avail         = Aug-2010
sw_avail         = Feb-2010
tester           = Fujitsu
hw_cpu_name      = Intel Xeon X7560
hw_cpu_char      = Intel Turbo Boost Technology up to 2.67 GHz
hw_cpu_mhz       = 2267
hw_disk          = 2 x 147 GB (SAS, 15000 RPM, RAID0)
hw_fpu           = Integrated
hw_memory        = 1 TB (128x 8GB DDR3-1066 DIMMs)
hw_model         = PRIMERGY RX900 S1, Intel Xeon X7560, 2.26 GHz
hw_ncpuorder     = 4,6,8 chips
hw_ncores        = 64
hw_nchips        = 8
hw_ncoresperchip = 8
hw_nthreadspercore = 2
hw_other         = None
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 24 MB I+D on chip per chip
hw_ocache        = None
hw_vendor        = Fujitsu
sw_file          = ext2
sw_os000         = SUSE Linux Enterprise Server 11 (x86_64),
sw_os001         = Kernel 2.6.27.19-5-default
sw_state         = Run level 3 (multi-user)
notes_submit_000 = numactl was used to bind copies to the cores

int=default=default=default:
sw_compiler000   = Intel C++  Professional Compiler for IA32 and
sw_compiler001 = Intel 64, Version 11.1
sw_compiler002   = Build 20100203 Package ID: l_cproc_p_11.1.069
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit
sw_other000      = Microquill SmartHeap V9.0
sw_other001      = Binutils 2.18.50.0.7.20080502

fp=default=default=default:
sw_compiler000   = Intel C++ and Fortran Professional Compiler for
sw_compiler001 = IA32 and Intel 64, Version  11.1
sw_compiler002   = Build 20100203 Package ID: l_cproc_p_11.1.069
sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 64-bit
sw_other        = N/A




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = http://www.spec.org/cpu2006/flags/Fujitsu.PQ1800.ic11.1-linux64.xml
notes_os_000 =The following command was used prior to run
notes_os_005 =
notes_os_010 =   ulimit -s unlimited
notes_os_015 =   echo 1 > /proc/sys/vm/zone_reclaim_mode




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.

437.leslie3d:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

default:
flagsurl000 = http://www.spec.org/cpu2006/flags/Fujitsu.RX900.ic11.1-linux64.xml
notes_000 = For information about Fujitsu please visit: http://www.fujitsu.com