# Invocation command line: # /cpu2006/bin/runspec --rate 2 -c cpu2006.1.1.ic11.1.linux64.ssse3.rate.jan182010.cfg --flagsurl=Intel-ic11.1-linux64-revE.xml -T all -o asc,pdf fp # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 11.0 # Operating system version: 64-Bit SUSE LINUX Enterprise Server 10 or later # Hardware: Intel Core 2 and compatible Intel processors # supporting Intel 64 and SSE4.1 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # Sep 2009 IC 11.1 Linux64 ############################################################################ action = validate tune = base ext = cpu2006.1.1.ic11.1.linux64.ssse3.rate.jan182010 PATHSEP = / check_md5=1 reportable=1 submit= MYMASK=`printf '0x%x' \$((1<<\$SPECCOPYNUM))`; taskset \$MYMASK $command # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 CXX= icpc -m32 OBJ = .o SMARTHEAP32_DIR = /home/cmplr/usr3/alrahate/cpu2006.1.1.ic11.1/libic11.1-32bit SMARTHEAP64_DIR = /home/cmplr/usr3/alrahate/cpu2006.1.1.ic11.1/libic11.1-64bit fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler options # for Dunnington use -xSSSE3 # for processors prior to dunnington, replace -xSSSE3 with -xSSSE3 #################################################################### default: SSE = -xSSSE3 FAST = $(SSE) -ipo -O3 -no-prec-div -static FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FAST) -inline-calloc -opt-malloc-options=3 -opt-prefetch CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch fp=base=default=default: OPTIMIZE= $(FAST) -opt-prefetch ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= $(FAST) -opt-prefetch CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use 400.perlbench=peak=default: COPTIMIZE= $(FAST) -ansi-alias -opt-prefetch 401.bzip2=peak=default: CC= icc -m64 PORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FAST) -opt-prefetch -ansi-alias 403.gcc=peak=default: COPTIMIZE = $(FAST) -inline-calloc -opt-malloc-options=3 feedback=0 429.mcf=peak=default: COPTIMIZE= $(FAST) -opt-prefetch 445.gobmk=peak=default: COPTIMIZE= $(SSE) -O2 -ipo -no-prec-div -ansi-alias 456.hmmer=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FAST) -unroll2 -ansi-alias feedback=no 458.sjeng=peak=default: COPTIMIZE= $(FAST) -unroll4 462.libquantum=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX COPTIMIZE= $(FAST) -opt-malloc-options=3 -parallel -auto-ilp32 -opt-prefetch feedback=no copies=1 submit= 464.h264ref=peak=default: COPTIMIZE= $(FAST) -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= $(FASTNOSTATIC) -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: CXX= icpc -m64 CXXPORTABILITY= -DSPEC_CPU_LP64 EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=routine 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: OPTIMIZE= $(FAST) COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use 410.bwaves=peak=default: OPTIMIZE= $(FAST) -opt-prefetch feedback=0 #################################################################################################################################### %ifdef %{stoakleydp8cores} copies=4 submit= if `test $SPECCOPYNUM -le 1`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 4` $command ; fi %endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= $(FAST) -unroll2 -Ob0 -ansi-alias -scalar-rep- 433.milc=peak=default: OPTIMIZE= $(FAST) -fno-alias COPTIMIZE= 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: OPTIMIZE= $(FAST) -opt-prefetch 436.cactusADM=peak=default: OPTIMIZE= $(FAST) -unroll2 -opt-prefetch -parallel copies=1 submit= 437.leslie3d=peak=default: OPTIMIZE= $(FAST) feedback=no #################################################################################################################################### %ifdef %{stoakleydp8cores} copies=4 submit= if `test $SPECCOPYNUM -le 1`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 4` $command ; fi %endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= $(FAST) -fno-alias -auto-ilp32 447.dealII=peak=default: CXXOPTIMIZE= $(FAST) -unroll2 -ansi-alias -scalar-rep- 450.soplex=peak=default: PORTABILITY = CXX= icpc -m32 OPTIMIZE= $(FAST) -opt-malloc-options=3 CXXOPTIMIZE= 453.povray=peak=default: CXXOPTIMIZE= $(FAST) -unroll4 -ansi-alias 454.calculix=peak=default: OPTIMIZE= $(FAST) feedback=0 459.GemsFDTD=peak=default: OPTIMIZE= $(FAST) -unroll2 -Ob0 -opt-prefetch 465.tonto=peak=default: OPTIMIZE= $(FAST) -unroll4 -auto 470.lbm=peak=default: OPTIMIZE= $(FAST) -opt-prefetch feedback=no #################################################################################################################################### %ifdef %{bensleydp8cores} copies=2 submit= if `test $SPECCOPYNUM -le 0`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 4` $command ; fi %endif %ifdef %{stoakleydp8cores} copies=4 submit= if `test $SPECCOPYNUM -le 1`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 4` $command ; fi %endif %ifdef %{tgt4p16cores} copies=8 submit= if `test $SPECCOPYNUM -le 3`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 8` $command ; fi %endif %ifdef %{dgt4p24cores} copies=12 submit= $[top]/mysubmit.pl $SPECCOPYNUM "$command" %endif %ifdef %{dgt4p16cores} copies=8 submit= $[top]/mysubmit.pl $SPECCOPYNUM "$command" %endif #################################################################################################################################### 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: PORTABILITY = CC= icc -m32 COPTIMIZE= -unroll2 feedback=no #################################################################################################################################### %ifdef %{stoakleydp8cores} copies=4 submit= if `test $SPECCOPYNUM -le 1`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 4` $command ; fi %endif %ifdef %{tgt4p16cores} copies=8 submit= if `test $SPECCOPYNUM -le 3`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 8` $command ; fi %endif %ifdef %{dgt4p24cores} copies=12 submit= $[top]/mysubmit.pl $SPECCOPYNUM "$command" %endif %ifdef %{dgt4p16cores} copies=8 submit= $[top]/mysubmit.pl $SPECCOPYNUM "$command" %endif #################################################################################################################################### ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 19 test_sponsor = Fujitsu hw_avail = Aug-2010 sw_avail = May-2010 tester = Fujitsu hw_cpu_name = Intel Celeron G1101 #hw_cpu_char = Intel Turbo Boost Technology up to 2.93 GHz hw_cpu_mhz = 2267 hw_disk = 1 x SATA, 160 GB, 5400 RPM hw_fpu = Integrated hw_memory000 = 16 GB (4x4 GB PC3-10600E, 2 rank, CL9-9-9, ECC, hw_memory001 = see add'l detail in notes) hw_model = PRIMERGY TX100 S2, Intel Celeron G1101, 2.27 GHz hw_ncpuorder = 1 chip hw_ncores = 2 hw_nchips = 1 hw_ncoresperchip = 2 hw_nthreadspercore = 1 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 2 MB I+D on chip per chip hw_ocache = None hw_vendor = Fujitsu prepared_by = G. Petersen sw_file = ext3 sw_os000 = SUSE Linux Enterprise Server 11 (x86_64) with SP1, sw_os001 = Kernel 2.6.32.12-0.7-default sw_state = Multi-User Run Level 3 notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run notes_plat_000 = The system automatically configures the memory to run at 1067 MHz. #notes_plat010= BIOS configuration: #notes_plat020= Data Reuse Optimization = Disable #notes_plat030= Intel HT Technology = Disable #notes_plat030= Performance/Power Setting = Traditional #notes_plat020= High Bandwidth option = Enable #notes_plat020= Adjacent Sector Prefetch = Disable #notes_plat020= Hardware Prefetch = Disable, Adjacent Sector Prefetch = Disable notes_015 = For information about Fujitsu please visit: http://www.fujitsu.com notes_020 = Binaries were compiled on SLES 10 with Binutils 2.18.50.0.7.20080502 int=default=default=default: sw_compiler001 = Intel C++ Professional Compiler for IA32 and Intel 64, Version 11.1 sw_compiler002 = Build 20091130 Package ID: l_cproc_p_11.1.064 sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit notes_submit_000 = taskset was used to bind copies to the cores except notes_submit_005 = for 462.libquantum peak notes_028 = OMP_NUM_THREADS set to number of cores notes_029 = KMP_AFFINITY set to granularity=fine,scatter sw_other = Microquill SmartHeap V8.1 fp=default=default=default: sw_compiler000 = Intel C++ and Fortran Professional Compiler for sw_compiler001 = IA32 and Intel 64, Version 11.1 sw_compiler002 = Build 20091130 Package ID: l_cproc_p_11.1.064, sw_compiler003 = l_cprof_p_11.1.064 sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit notes_submit_000 = taskset was used to bind copies to the cores except notes_submit_005 = for 436.cactusADM peak notes_000 = OMP_NUM_THREADS set to number of cores notes_005 = KMP_AFFINITY set to granularity=fine,scatter notes_010 = KMP_STACKSIZE set to 200M sw_other = None # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 459.GemsFDTD: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 447.dealII: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 444.namd: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 437.leslie3d: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 410.bwaves: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic11.1-linux64-revE.20100708.xml