# Invocation command line:
# /work/cpu2006-v11/bin/runspec -c fsc-ic101-rate -T all --input ref -n 3 --rate 8 -o all fp
# output_root was not used for this run
############################################################################
##########################################################
# SPEC CPU2006 v1.1 Intel SLES10 x64 config file         #
# Intel Compiler 10.1 for Linux Intel EM64T (mostly)     #
# for rate runs only                                     #
# Aug 2008                                             #
##########################################################

action      = validate
tune        = base
ext         = cpu2006.11.ic101.20080819.rate
PATHSEP     = /
check_md5=1
reportable=1
mean_anyway = 1

flagsurl000= http://www.spec.org/cpu2006/flags/flags-ic101-linux-intel64.20090714.xml

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
# File to be included into config file for SPEC CPU2006
# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

################################################################
#			    	Notes section                  #
################################################################


default=default=default=default:

# notes_comp_010 = Compiler specific notes; see *.cfg
# notes_port_010 = About Portabiliy flags; see *.cfg
# notes_base_010 = About base binaries; see *.cfg
# notes_peak_010 = About peak binaries; see *.cfg


notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
notes_os_005= OMP_NUM_THREADS set to number of cores (default).

notes_plat_000= BIOS configuration:
notes_plat_005= Enhanced Speedstep Technology = Disable
notes_plat_010= C1 Enhanced Mode = Disable

# notes_plat020= Hardware Prefetch = Enable, Adjacent Sector Prefetch = Enable
# notes_plat030= SnoopFilter = Disable
notes_plat_015= Hardware Prefetch = Disable, Adjacent Sector Prefetch = Disable
notes_plat_020= SnoopFilter = Enable

# notes_part_010 = Not for us

notes_000=For information about Fujitsu Siemens Computers please see:
notes_005=http://www.fujitsu-siemens.com


################################################################
#			 End of Notes section                  #
################################################################

# Use of thread-binding controlled by macro

%ifdef %{binding}
use_submit_for_speed=1
submit = /usr/bin/taskset -c $SPECCOPYNUM $command

# submit0 = MYMASK=\$((1<<$SPECCOPYNUM))
# submit1 = /usr/bin/taskset \$MYMASK $command

# submit= MYMASK=\$((1<<\$SPECCOPYNUM)) ; /usr/bin/taskset \$MYMASK $command
# submit=MYMASK=`printf '0x%x' \$((1<<$SPECCOPYNUM))` ; /usr/bin/taskset \$MYMASK $command
%endif

################################################################
# Description Hardware and Software
################################################################

default=default=default=default:
hw_vendor = Fujitsu Siemens Computers
hw_model = CELSIUS R650, Intel Xeon X5470 processor
hw_cpu_name = Intel Xeon X5470
hw_cpu_char =
hw_cpu_mhz = 3333
hw_fpu = Integrated
#
hw_nchips = 2
hw_ncores = 8
hw_ncoresperchip = 4
hw_nthreadspercore = 1
#
hw_ncpuorder = 1,2 chips
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 12 MB I+D on chip per chip, 6 MB shared / 2 cores
hw_tcache = None
hw_ocache = None
hw_memory = 8 GB (8x1 GB DDR2 5300F, 2 rank, CL5-5-5, ECC)
hw_disk = 1 x SATA II, 400 GB, 7200 rpm
hw_other = None

sw_file=ext3
sw_state=Multi-User, Run Level 3

license_num = 22
test_sponsor = Fujitsu Siemens Computers
tester = Fujitsu Siemens Computers
hw_avail = Sep-2008
prepared_by = Fujitsu Siemens Computers
# ---- End inclusion of '/work/cpu2006-v11/config/SUT.inc'

################################################################
#			    	Notes section                  #
################################################################

default=default=default=default:
notes_comp_000 = Binaries have been built under SLES10 SP1

default=default=default=default:
# notes_port_010 = All portabilty flags have been approved

# notes_base_010 = -fast always used

# notes_peak_010 = using feedback optimization
# notes_peak_015 = Some benchmarks same for base and peak

# note_os_010 = Magic Vista was used

# notes010 ... General notes, see also SUT.inc

# notes_submit_010 = see SUT.inc
# notes_plat_000 = see SUT.inc
# notes_part_010 = only used for ...; would be in SUT.inc

################################################################
#			 End of Notes section                  #
################################################################

################################################################
#			 Compiler selection                    #
################################################################

# Environment variables are expected to be set for 64-bit compilers

CC64  = icc
CXX64 = icpc
FC64  = ifort

# Settings for 32-bit compilers

COMPILER_DIR_CC32 = /opt/intel/cc/10.1.017
COMPILER_DIR_FC32 = /opt/intel/fc/10.1.017
CC32 = $(COMPILER_DIR_CC32)/bin/icc -L$(COMPILER_DIR_CC32)/lib -I$(COMPILER_DIR_CC32)/include
CXX32 = $(COMPILER_DIR_CC32)/bin/icpc -L$(COMPILER_DIR_CC32)/lib -I$(COMPILER_DIR_CC32)/include
FC32 = $(COMPILER_DIR_FC32)/bin/ifort -L$(COMPILER_DIR_FC32)/lib -I$(COMPILER_DIR_FC32)/include

# Default: 32-bit for int; 64-bit for fp

int=default=default=default:
CC  = $(CC32)
CXX = $(CXX32)
OBJ = .o
SMARTHEAP_DIR = /opt/SmartHeap_8.1/lib
sw_base_ptrsize = 32-bit
sw_peak_ptrsize = 32/64-bit

fp=default=default=default:
CC  = $(CC64)
CXX = $(CXX64)
FC  = $(FC64)
OBJ = .o
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 32/64-bit

################################################################
# portability & libraries
#################### Portability Flags ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

#########################
# Baseline Tuning Flags #
#########################

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    -fast -inline-calloc -opt-malloc-options=3
CXXOPTIMIZE=  -xT -ipo -O3 -no-prec-div

fp=base=default=default:
OPTIMIZE=    -fast

#########################
# int Peak Tuning Flags #
#########################

int=peak=default:
COPTIMIZE=       -fast
CXXOPTIMIZE=     -xT -ipo -O3 -no-prec-div
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  -prof-use

400.perlbench=peak=default:
COPTIMIZE= -fast -ansi-alias -prefetch

401.bzip2=peak=default:
CC = $(CC64)
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -prefetch

403.gcc=peak=default:
COPTIMIZE = -fast -inline-calloc -opt-malloc-options=3
feedback=0

429.mcf=peak=default:
COPTIMIZE= -fast -prefetch
feedback=0

445.gobmk=peak=default:
COPTIMIZE= -xT -O2 -ipo -no-prec-div -ansi-alias

456.hmmer=peak=default:
CC = $(CC64)
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -unroll2 -ansi-alias -opt-multi-version-aggressive
feedback=no

458.sjeng=peak=default:
COPTIMIZE= -fast -unroll4

462.libquantum=peak=default:
COPTIMIZE= -fast -unroll4 -Ob0 -prefetch -opt-streaming-stores always -vec-guard-write -opt-malloc-options=3 -parallel -par-runtime-control
feedback=no
copies=1
submit =

464.h264ref=peak=default:
COPTIMIZE= -fast -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=routine

483.xalancbmk=peak=default:
basepeak=yes

########################
# fp Peak Tuning Flags #
########################

fp=peak=default:
OPTIMIZE=    -fast
COPTIMIZE=   -auto-ilp32
CXXOPTIMIZE= -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  -prof-use

410.bwaves=peak=default:
OPTIMIZE=    -fast -prefetch
feedback=0
copies=4

416.gamess=peak=default:
OPTIMIZE= -fast -unroll2 -Ob0 -ansi-alias -scalar-rep-

433.milc=peak=default:
# OPTIMIZE= -fast -fno-alias
basepeak=yes

435.gromacs=peak=default:
OPTIMIZE=    -fast -prefetch

436.cactusADM=peak=default:
OPTIMIZE= -fast -unroll2 -prefetch -parallel
copies=1
submit =

437.leslie3d=peak=default:
PORTABILITY =
FC = $(FC32)
OPTIMIZE=    -fast -prefetch -opt-malloc-options=3

444.namd=peak=default:
CXXOPTIMIZE= -fast -fno-alias -auto-ilp32

447.dealII=peak=default:
CXXOPTIMIZE= -fast -unroll2 -ansi-alias -scalar-rep-

450.soplex=peak=default:
PORTABILITY =
CXX = $(CXX32)
OPTIMIZE= -fast -opt-malloc-options=3
CXXOPTIMIZE=

453.povray=peak=default:
CXXOPTIMIZE= -fast -unroll4 -ansi-alias

454.calculix=peak=default:
OPTIMIZE= -fast -unroll-aggressive
feedback=0

459.GemsFDTD=peak=default:
OPTIMIZE= -fast -unroll2 -Ob0 -prefetch

465.tonto=peak=default:
OPTIMIZE= -fast -unroll4 -auto

470.lbm=peak=default:
PORTABILITY =
CC = $(CC32)
COPTIMIZE= -unroll2 -scalar-rep- -prefetch -opt-malloc-options=3
copies=4

470.lbm=peak=default=tgtn4p16cores:
copies=8

481.wrf=peak=default:
OPTIMIZE= -fast
feedback=0

482.sphinx3=peak=default:
PORTABILITY =
CC = $(CC32)
COPTIMIZE= -unroll2
feedback=no
copies=4

482.sphinx3=peak=default=tgtn4p16cores:
copies=8

#########################
# Used Compilers and OS #
#########################

default=default=default=default:
sw_os000         = SuSE Linux Enterprise Server 10 (x86_64) SP2,
sw_os001         = kernel 2.6.16.60-0.21-smp

int=default=default=default:
sw_compiler001   = Intel C++ Compiler for Linux32 and Linux64,
sw_compiler002   = Version 10.1, Build 20080602
sw_other000      = Microquill SmartHeap Library, Version 8.1
sw_other001      = binutils-2.17.50.0.5-0.1.x86_64
sw_avail         = Jun-2008

fp=default=default=default:
sw_compiler000   = Intel C++ and Fortran Compiler
sw_compiler001   = for Linux32 and Linux64
sw_compiler002   = Version 10.1 - Build 20080602
sw_other         = binutils-2.17.50.0.5-0.1.x86_64
sw_avail         = Jun-2008