# Invocation command line:
# E:\CPU2006-v1.0\bin\runspec -c fsc-ic101-20071206-rate-int -T all --input ref -n 3 --rate 4 -o all int
# output_root was not used for this run
############################################################################
# SPEC CPU2006 Intel Windows Vista config file
# OS: 64 bit;   Binaries: 32 bit
# Dezember 2007
#
# Intel Compiler 10.1
# Microsoft Visual Studio 2005 with SP1
# SmartHeap Library 8.1

action = validate
tune = base or peak
ext = CPU2006.v10.ic101.rate32.20071206
PATHSEP =	/
flagsurl000= http://www.spec.org/cpu2006/flags/CPU2006_flags.20090713.02.xml

check_md5 = 1
mean_anyway = 1
reportable = 1

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
# File to be included into config file for SPEC CPU2006

# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

%ifdef %{binding}
use_submit_for_speed=1
submit0 = echo @ echo off >runex.cmd
submit1 = specperl -e "system sprintf qq{echo set MYMASK= %x >>runex.cmd}, (1<<$SPECCOPYNUM)"
submit2 = echo start /b /wait /affinity %MYMASK% $command >>runex.cmd
submit3 = call runex.cmd
#submit=specperl -e "system sprintf qq{start /b /wait /affinity %x %s}, (1<<(2*$SPECCOPYNUM)), qq{$command}"

notes960='start /b /wait /affinity' command is used to bind CPU(s) to processors.
notes962=The Windows command "start /b /wait /affinity <hex_affinity_mask> application"
notes964=  starts the specified application without creating a new window (/b)
notes966=  and waits for its termination (/wait). Only the processors specified
notes968=  in <hex_affinity_mask> are allowed to execute the application.
notes970=  See the Windows documentation for the description of other parameters
notes972=  of the start command.
notes974=
%endif

################################################################
# System information
# If some remarks about BIOS or Firmware are needed, place them here.
################################################################

default=default=default=default:
# notes900=
# notes901=The system bus runs at 1066 MHz

notes_plat_000=BIOS default settings have been used.
# notes_plat_000=BIOS default settings have been used, except:
# notes_plat_010=Snoop Filter Enabled
# notes_plat_020=   (The Snoop Filter is designed to reduce system bus utilization coming
# notes_plat_030=   from cache misses. It can lead to significant memory performance
# notes_plat_040=   improvements for several workstation applications on suitable memory
# notes_plat_050=   configurations.)
# notes_plat_060=Adjacent Cache Line Prefetch Enabled
# notes_plat_070=  (Prefetches a cache line pair of data instead of only the cache line
# notes_plat_080=  that contains the requested data. This helps to improve data access time
# notes_plat_090=  for some applications, especially for single processors.)
# notes_plat_100=High Bandwith Option Enabled
# notes_plat_110=  (To Optimize throughput of High Bandwidth FSB applications
# notes_plat_120=  on multiprocessor configurations)

################################################################
# About Fujitsu Siemens Computers
################################################################

default=default=default=default:
notes_000=
notes_005= All binaries were built with 32-bit Intel compiler except:
notes_010= 401.bzip2 and 456.hmmer in peak were built with 64-bit Intel
notes_015 = compiler by changing the path for include and library files.
notes_020 =
notes_025 =For information about Fujitsu Siemens Computers please see:
notes_030 =http://www.fujitsu-siemens.com/

################################################################
# Description Hardware and Software
################################################################

default=default=default=default:
hw_vendor = Fujitsu Siemens Computers
hw_model = CELSIUS M460, Intel Core 2 Quad Q9550
hw_cpu_name = Intel Core 2 Quad Q9550
hw_cpu_char =
hw_cpu_mhz = 2833
hw_fpu = Integrated
#
hw_nchips = 1
hw_ncores = 4
hw_ncoresperchip = 4
hw_nthreadspercore = 1
#
hw_ncpuorder = 1 chip
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 12 MB I+D on chip per chip, 6 MB shared / 2 cores
hw_tcache = None
hw_ocache = None
hw_memory = 4 GB (4x1 GB PC2-6400 CL6 SDRAM)
hw_disk = 1 x 400 GB SATA 7200 RPM
hw_other = None

sw_file = NTFS
sw_state = Default

license_num = 22
test_sponsor = Fujitsu Siemens Computers
tester = Fujitsu Siemens Computers
test_date = Mar-2008
hw_avail = Mar-2008
prepared_by = Fujitsu Siemens Computers
config =
# ---- End inclusion of 'E:/CPU2006-v1.0/config/SUT.inc'

################################################################
# Compiler section
################################################################

default=default:
CC  = icl -Qvc8 -Qc99
CXX = icl -Qvc8
FC  = ifort
OBJ = .obj

int=default:
EXTRA_LDFLAGS     = -F512000000 

fp=default:
EXTRA_LDFLAGS     = -F1000000000

################################################################
# Portability section
################################################################
403.gcc=default=default=default:
CPORTABILITY      = -DSPEC_CPU_WIN32
EXTRA_CFLAGS      = -Dalloca=_alloca 

436.cactusADM=default=default=default:
FPORTABILITY      = -Qlowercase -assume:underscore 

444.namd=default=default=default:
CXXPORTABILITY    =  -TP 

447.dealII=default=default=default:
PORTABILITY       = -DDEAL_II_MEMBER_VAR_SPECIALIZATION_BUG

453.povray=default=default=default:
CXXPORTABILITY    = -DSPEC_CPU_WINDOWS_ICL  

454.calculix=default=default=default:
PORTABILITY      = -Qlowercase -DSPEC_CPU_NOZMODIFIER 

464.h264ref=default=default=default:
PORTABILITY       = -DSPEC_CPU_NO_INTTYPES -DWIN32 

481.wrf=default:
CPORTABILITY     = -DSPEC_CPU_WINDOWS_ICL 

483.xalancbmk=default=default=default:
CXXPORTABILITY   = -Qoption,cpp,--no_wchar_t_keyword

# Portability for 64-bit (some peak tests)
401.bzip2,456.hmmer=peak=default=default:
PORTABILITY      = -DSPEC_CPU_P64

################################################################
# SmartHeap Tuning Flags
################################################################
all_cpp=default=default=default:
EXTRA_LIBS=     shlW32M.lib 
LDOUT=          -Fe$@ -link -FORCE:MULTIPLE

################################################################
# Baseline Tuning Flags
# default baseline for int and fp 2006
################################################################

int=base=default=default:
OPTIMIZE=        -fast 
COPTIMIZE=       -Qvec-guard-write
CXXOPTIMIZE=     -Qcxx_features 

fp=base=default=default:
OPTIMIZE=       -fast 
CXXOPTIMIZE=    -Qcxx_features

################################################################
# Peak Tuning Flags
# default peak for int and fp 2006
################################################################

int=peak=default=default:
OPTIMIZE=       -fast 
CXXOPTIMIZE=    -Qcxx_features 
PASS1_CFLAGS=    -Qprof_gen
PASS2_CFLAGS=    -Qprof_use
PASS1_CXXFLAGS=  -Qprof_gen
PASS2_CXXFLAGS=  -Qprof_use
PASS1_FFLAGS=    -Qprof_gen
PASS2_FFLAGS=    -Qprof_use
PASS1_LDFLAGS=   -Qprof_gen
PASS2_LDFLAGS=   -Qprof_use

fp=peak=default=default:
OPTIMIZE=       -fast 
CXXOPTIMIZE=    -Qcxx_features


################################################################
# Peak Tuning Flags int 2006 fast
################################################################

# 64-bit compiler for peak of 401.bzip2 and 456.hmmer
401.bzip2,456.hmmer=peak=default=default:
CC64PATH=C:\DevelTools\Intel\Compiler\C++\10.1.011\EM64T
CC=$(CC64PATH)\Bin\icl.exe -I$(CC64PATH)\Include
LDOUT=-Fe$@ -link -LIBPATH:$(CC64PATH)\Lib -link -LIBPATH:"C:\Program Files\Microsoft Visual Studio 8\vc\lib" -link -LIBPATH:"C:\Program Files\Microsoft Visual Studio 8\vc\lib\amd64"

400.perlbench=peak=default:
OPTIMIZE= -fast -Qansi-alias -Qprefetch
EXTRA_LIBS=     shlW32M.lib 
LDOUT=          -Fe$@ -link -FORCE:MULTIPLE

401.bzip2=peak=default:
OPTIMIZE= -fast -Qprefetch

403.gcc=peak=default:
OPTIMIZE= -fast  
EXTRA_LIBS=

429.mcf=peak=default:
# OPTIMIZE= -fast -Qprefetch
# EXTRA_LIBS=     shlW32M.lib 
# LDOUT=          -Fe$@ -link -FORCE:MULTIPLE
basepeak=yes

445.gobmk=peak=default:
OPTIMIZE= -QxT -O2 -Qipo -Qprec-div- -Qansi-alias
EXTRA_LIBS=

456.hmmer=peak=default:
OPTIMIZE= -fast -Qunroll2 -Qansi-alias -Qopt-multi-version-aggressive

458.sjeng=peak=default:
OPTIMIZE= -fast -Qunroll4

462.libquantum=peak=default:
# OPTIMIZE= -fast -Qunroll4 -Ob0 -Qprefetch -Qopt-streaming-stores:always  -Qparallel -Qpar-runtime-control
# feedback=no
# copies=1
# submit=
basepeak=yes

464.h264ref=peak=default:
OPTIMIZE= -fast -Qunroll2 -Qansi-alias

471.omnetpp=peak=default:
OPTIMIZE= -fast -Qansi-alias -Qopt-ra-region-strategy=block

473.astar=peak=default:
OPTIMIZE= -fast -Qansi-alias -Qopt-ra-region-strategy=routine

483.xalancbmk=peak=default:
OPTIMIZE= -fast -Qansi-alias

################################################################
# Peak Tuning Flags fp 2006 fast
################################################################

410.bwaves=peak=default:
basepeak=yes

410.bwaves=peak=default=stoakleydp8cores:
copies=4

416.gamess=peak=default:
OPTIMIZE= -fast -Qunroll2 -Ob0 -Qansi-alias -Qscalar-rep-

433.milc=peak=default:
OPTIMIZE= -fast -Qunroll2 -Oa

434.zeusmp=peak=default:
OPTIMIZE= -QxT -O2 -Qprec-div- -Qunroll0 -Qscalar-rep-

435.gromacs=peak=default:
OPTIMIZE= -fast -Oa -Qprefetch

436.cactusADM=peak=default:
OPTIMIZE=       -fast -Qunroll2 -Qprefetch

437.leslie3d=peak=default:
OPTIMIZE=    -fast -Qprefetch  

437.leslie3d=peak=default=stoakleydp8cores:
copies=4

444.namd=peak=default:
OPTIMIZE= -fast -Oa

447.dealII=peak=default:
OPTIMIZE= -fast -Qunroll2 -Qprefetch

453.povray=peak=default:
OPTIMIZE= -fast -Qunroll4 -Qansi-alias

454.calculix=peak=default:
OPTIMIZE= -fast -Qunroll-aggressive
feedback=0

459.GemsFDTD=peak=default:
OPTIMIZE= -fast -Qunroll2 -Ob0 -Qprefetch 

465.tonto=peak=default:
OPTIMIZE= -fast -Qunroll4 -Qauto

470.lbm=peak=default:
OPTIMIZE= -fast -Qunroll2 -Qscalar-rep-  -Qprefetch
copies=1

470.lbm=peak=default=stoakleydp8cores:
copies=4
470.lbm=peak=default=tgt4p16cores:
copies=8
470.lbm=peak=default=bensleydp8cores:
copies=2

481.wrf=peak=default:
basepeak=yes

482.sphinx3=peak=default:
OPTIMIZE= -fast -Qunroll2
feedback=0

482.sphinx3=peak=default=stoakleydp8cores:
copies=4
482.sphinx3=peak=default=tgt4p16cores:
copies=8

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
sw_avail         = Nov-2007
sw_os            = Windows Vista64 Ultimate

int=default=default=default:
sw_compiler000=Intel C++ Compiler
sw_compiler001=for applications running on IA-32,
sw_compiler002=Version 10.1, Build 20070913
sw_compiler003=Intel C++ Compiler
sw_compiler004=for applications running on Intel 64,
sw_compiler005=Version 10.1, Build 20070913
sw_compiler006=Microsoft Visual Studio 2005 with SP1
sw_compiler007=(for libraries)
sw_base_ptrsize = 32-bit
sw_peak_ptrsize = 32/64-bit

sw_auto_parallel = No
sw_other000      = SmartHeap Library Version 8.1 from
sw_other001      = http://www.microquill.com/

fp=default=default=default:
sw_compiler000   = Intel C++ Compiler for IA32 version 10.1
sw_compiler001   = Build 20070913 Package ID: w_cc_p_10.1.011
sw_compiler002   = Intel Fortran Compiler for IA32 version 10.1
sw_compiler003   = Build 20070913 Package ID: w_fc_p_10.1.011
sw_compiler004   = Microsoft Visual Studio 2005 SP1 (for libraries)
sw_base_ptrsize = 32-bit
sw_peak_ptrsize = 32-bit

sw_auto_parallel = No
sw_other001      = SmartHeap Library Version 8.1 from
sw_other002      = http://www.microquill.com/