# Invocation command line:
# /home/cpu2006/bin/runspec -a validate -c linux_ic91_fprate.cfg -F config/NEC-ic91-FP-linux-flags-20071017.xml -T all -o all -r 8 fp
# output_root was not used for this run
############################################################################
######################################################
# SPEC CPU2006 Intel SLES10 x64 (64-bit) config file #
# Mar 27 2007 Intel Compiler 9.1 for Linux Intel64   #
######################################################

action      = validate
tune        = all
ext         = NEC
PATHSEP     = /

check_md5   = 1
mean_anyway = 1
reportable  = 1


############################################################################
# File to be included into config file for SPEC CPU2006

# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

#######################################################################
# System information                                                  #
# If some remarks about BIOS or Firmware are needed, place them here. #
####################################################################### 

default=default=default=default:
notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
notes_os_005 = '/usr/bin/taskset' used to bind processes to CPUs
notes_000= The system bus runs at 1333 MHz

int=default=default=default:
notes_015= All binaries were built with 32-bit Intel compiler except:
notes_020= 401.bzip2, 456.hmmer and 462.libquantum in peak were built with
notes_025= 64-bit Intel compiler by changing the path for include and library files.

fp=default=default=default:
notes_005= All binaries were built with 64-bit Intel compiler except:
notes_010= 433.milc, 434.zeusmp, 450.soplex, 470.lbm and 482.sphinx3 in peak were built with
notes_015= 32-bit Intel compiler by changing the path for include and library files.

#####################################
# Description Hardware and Software #
#####################################

default=default=default=default:
license_num      = 9006
prepared_by = NEC Corporation
test_sponsor     = NEC Corporation
hw_avail         = Jan-2007
sw_avail         = Apr-2007
test_date        = Nov-2007
tester           = NEC Corporation
hw_cpu_name      = Intel Xeon E5345
hw_cpu_char      = 2.33 GHz, 2x4 MB L2 shared, 1333 MHz bus
hw_cpu_mhz       = 2333
hw_disk          = 1x73.2 GB SAS, 10000RPM
hw_fpu           = Integrated
hw_memory        = 16 GB (8x2 GB PC2-5300F, 2 rank, CL5-5-5, ECC)
hw_model000      = Express5800/120Bb-m6
hw_model001      = (Intel Xeon processor E5345)
hw_ncpuorder     = 1,2 chips
hw_ncores        = 8
hw_nchips        = 2
hw_ncoresperchip = 4
hw_nthreadspercore = 1
hw_other         = None
sw_auto_parallel = No
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 8 MB I+D on chip per chip, 4 MB shared / 2 cores
hw_tcache        = None
hw_ocache        = None
hw_vendor        = NEC Corporation
sw_file          = ext2
sw_os000         = SUSE Linux Enterprise Server 10 (x86_64),
sw_os001         = Kernel 2.6.16.21-0.8-smp
sw_state         = Multiuser, Runlevel 3
sw_other000      = MicroQuill SmartHeap library 8.1

default=default=default=default:
CC  = icc
CXX = icpc
FC  = ifort
OBJ = .o

SMARTHEAP_DIR = /opt/SmartHeap_8.1/lib

submit= taskset -c $SPECCOPYNUM $command

###########################
# portability & libraries #
###########################

fp=default=default=default:
PORTABILITY = -DSPEC_CPU_LP64

400.perlbench=default=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX_X64

462.libquantum=default=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX

483.xalancbmk=default=default=default:
CXXPORTABILITY = -DSPEC_CPU_LINUX

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

#########################
# Baseline Tuning Flags #
#########################

int=base=default=default:
COPTIMIZE= -fast
CXXOPTIMIZE= -xP -O3 -ipo -no-prec-div
EXTRA_CXXLIBS= -L$(SMARTHEAP_DIR) -lsmartheap

fp=base=default=default:
OPTIMIZE= -fast

#####################
# Peak Tuning Flags #
#####################

int=peak=default=default:
OPTIMIZE= -fast
EXTRA_LIBS= -L$(SMARTHEAP_DIR) -lsmartheap

PASS1_CFLAGS   = -prof_gen
PASS2_CFLAGS   = -prof_use
PASS1_CXXFLAGS = -prof_gen
PASS2_CXXFLAGS = -prof_use
PASS1_LDFLAGS  = -prof_gen
PASS2_LDFLAGS  = -prof_use

fp=peak=default=default:
OPTIMIZE= -fast

PASS1_CFLAGS   = -prof_gen
PASS2_CFLAGS   = -prof_use
PASS1_FFLAGS   = -prof_gen
PASS2_FFLAGS   = -prof_use
PASS1_CXXFLAGS = -prof_gen
PASS2_CXXFLAGS = -prof_use
PASS1_LDFLAGS  = -prof_gen
PASS2_LDFLAGS  = -prof_use

400.perlbench=peak=default=default:
EXTRA_LIBS= 

401.bzip2=peak=default=default:
CC=/opt/intel/cce/9.1.049/bin/icc -I/opt/intel/cce/9.1.049/include -L/opt/intel/cce/9.1.049/lib
PORTABILITY=-DSPEC_CPU_LP64
EXTRA_LIBS= 
feedback=0

403.gcc=peak=default=default:
basepeak=yes

456.hmmer=peak=default=default:
CC=/opt/intel/cce/9.1.049/bin/icc -I/opt/intel/cce/9.1.049/include -L/opt/intel/cce/9.1.049/lib
PORTABILITY=-DSPEC_CPU_LP64
EXTRA_LIBS= 

462.libquantum=peak=default=default:
CC=/opt/intel/cce/9.1.049/bin/icc -I/opt/intel/cce/9.1.049/include -L/opt/intel/cce/9.1.049/lib
PORTABILITY=-DSPEC_CPU_LP64
EXTRA_LIBS= 

471.omnetpp=peak=default=default:
OPTIMIZE=-xP -O3 -ipo -no-prec-div

483.xalancbmk=peak=default=default:
basepeak=yes

410.bwaves=peak=default=default:
basepeak=yes

416.gamess=peak=default=default:
basepeak=yes

433.milc=peak=default=default:
PORTABILITY= 
CC=/opt/intel/cc/9.1.049/bin/icc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib

434.zeusmp=peak=default=default:
PORTABILITY= 
FC=/opt/intel/fc/9.1.045/bin/ifort -I/opt/intel/fc/9.1.045/include -L/opt/intel/fc/9.1.045/lib
feedback=0

436.cactusADM=peak=default=default:
basepeak=yes

437.leslie3d=peak=default=default:
basepeak=yes

444.namd=peak=default=default:
basepeak=yes

450.soplex=peak=default=default:
PORTABILITY= 
CXX=/opt/intel/cc/9.1.049/bin/icpc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib

459.GemsFDTD=peak=default=default:
basepeak=yes

470.lbm=peak=default=default:
PORTABILITY= 
CC=/opt/intel/cc/9.1.049/bin/icc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib

481.wrf=peak=default=default:
basepeak=yes

482.sphinx3=peak=default=default:
PORTABILITY= 
CC=/opt/intel/cc/9.1.049/bin/icc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib
feedback=0

#########################
# Used Compilers and OS #
#########################

int=default=default=default:
sw_compiler000   = Intel C++ Compiler for IA32/EM64T application,
sw_compiler001   = Version 9.1 - Build 20070215, Package-ID:
sw_compiler002 = l_cc_p_9.1.049
sw_other         = Smart Heap Library, Version 8.1
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit

fp=default=default=default:
sw_compiler000   = Intel C++ Compiler for IA32/EM64T application,
sw_compiler001   = Version 9.1 - Build 20070320, Package-ID:
sw_compiler002 = l_cc_c_9.1.049
sw_compiler003   = Intel Fortran Compiler for IA32/EM64T application,
sw_compiler004   = Version 9.1 - Build 20070320, Package ID:
sw_compiler005 = l_fc_c_9.1.045
sw_other000      = None
sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 32/64-bit

######################




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000= http://www.spec.org/cpu2006/flags/NEC-ic91-FP-linux-flags.xml