| CPU2006 license: | 22 | Test date: | Jul-2007 |
|---|---|---|---|
| Test sponsor: | Fujitsu Siemens Computers | Hardware Availability: | Jul-2007 |
| Tested by: | Fujitsu Siemens Computers | Software Availability: | Mar-2007 |
| Hardware | |
|---|---|
| CPU Name: | AMD Opteron 2222 |
| CPU Characteristics: | Dual Core, 3.0 GHz, 2 MB L2-cache |
| CPU MHz: | 3000 |
| FPU: | Integrated |
| CPU(s) enabled: | 4 cores, 2 chips, 2 cores/chip |
| CPU(s) orderable: | 1,2 chips |
| Primary Cache: | 64 KB I + 64 KB D on chip per core |
| Secondary Cache: | 1 MB I+D on chip per core |
| L3 Cache: | None |
| Other Cache: | None |
| Memory: | 16 GB (8x2GB DDR2-667 CL5 dual rank ECC DIMMs registered) |
| Disk Subsystem: | SATA II, 80 GB |
| Other Hardware: | None |
| Software | |
|---|---|
| Operating System: | SLES 10 for AMD64/EM64T |
| Compiler: | QLogic PathScale Compiler Suite, - Release 3.0 |
| Auto Parallel: | No |
| File System: | ext3 |
| System State: | Multi-User SuSE Run Level 3 |
| Base Pointers: | 32/64-bit |
| Peak Pointers: | 32/64-bit |
| Other Software: | SmartHeap 8.1 |
Results Table
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 400.perlbench | 4 | 728 | 53.7 | 726 | 53.8 | 725 | 53.9 | 4 | 591 | 66.1 | 591 | 66.1 | 591 | 66.1 |
| 401.bzip2 | 4 | 949 | 40.7 | 950 | 40.6 | 951 | 40.6 | 4 | 946 | 40.8 | 947 | 40.7 | 946 | 40.8 |
| 403.gcc | 4 | 873 | 36.9 | 879 | 36.6 | 892 | 36.1 | 4 | 701 | 45.9 | 700 | 46.0 | 707 | 45.6 |
| 429.mcf | 4 | 891 | 40.9 | 892 | 40.9 | 892 | 40.9 | 4 | 678 | 53.8 | 678 | 53.8 | 678 | 53.8 |
| 445.gobmk | 4 | 694 | 60.5 | 696 | 60.3 | 695 | 60.3 | 4 | 588 | 71.3 | 588 | 71.3 | 589 | 71.2 |
| 456.hmmer | 4 | 632 | 59.1 | 632 | 59.1 | 633 | 58.9 | 4 | 471 | 79.2 | 468 | 79.7 | 472 | 79.0 |
| 458.sjeng | 4 | 883 | 54.8 | 883 | 54.8 | 880 | 55.0 | 4 | 806 | 60.0 | 811 | 59.7 | 809 | 59.9 |
| 462.libquantum | 4 | 1554 | 53.3 | 1556 | 53.3 | 1555 | 53.3 | 4 | 1553 | 53.4 | 1553 | 53.4 | 1552 | 53.4 |
| 464.h264ref | 4 | 1008 | 87.8 | 998 | 88.7 | 1007 | 87.9 | 4 | 966 | 91.7 | 949 | 93.3 | 948 | 93.4 |
| 471.omnetpp | 4 | 662 | 37.8 | 662 | 37.8 | 667 | 37.5 | 4 | 662 | 37.8 | 662 | 37.8 | 661 | 37.8 |
| 473.astar | 4 | 717 | 39.2 | 717 | 39.2 | 717 | 39.1 | 4 | 717 | 39.2 | 717 | 39.2 | 717 | 39.1 |
| 483.xalancbmk | 4 | 444 | 62.2 | 444 | 62.1 | 446 | 61.9 | 4 | 440 | 62.8 | 442 | 62.5 | 441 | 62.6 |
Operating System Notes
powersave -f is applied to set CPU to maximum frequency prior to run stacksize is set to unlimited prior to run
General Notes
BIOS default settings with Node memory interleave disabled, SRAT enabled 'taskset $MYMASK $command' has been used to bind processes to CPUs The Linux command 'taskset $MYMASK $command' executes the specified command; only the processors specified in $MYMASK are allowed to execute the application. See the Linux documentation for detailed description of taskset. For information about Fujitsu Siemens Computers in your country please see: http://www.fujitsu-siemens.com/countries
Base Portability Flags
| 400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
| 401.bzip2: | -DSPEC_CPU_LP64 |
| 403.gcc: | -DSPEC_CPU_LP64 |
| 429.mcf: | -DSPEC_CPU_LP64 |
| 445.gobmk: | -DSPEC_CPU_LP64 |
| 456.hmmer: | -DSPEC_CPU_LP64 |
| 458.sjeng: | -DSPEC_CPU_LP64 |
| 462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX |
| 464.h264ref: | -DSPEC_CPU_LP64 |
| 483.xalancbmk: | -DSPEC_CPU_LINUX |
Base Optimization Flags
C benchmarks:
| -Ofast -OPT:malloc_alg=1 |
C++ benchmarks:
| -Ofast -m32 -L/opt/SmartHeap_8.1/lib -lsmartheap |
Peak Portability Flags
| 400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
| 401.bzip2: | -DSPEC_CPU_LP64 |
| 445.gobmk: | -DSPEC_CPU_LP64 |
| 456.hmmer: | -DSPEC_CPU_LP64 |
| 458.sjeng: | -DSPEC_CPU_LP64 |
| 462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX |
| 464.h264ref: | -DSPEC_CPU_LP64 |
| 483.xalancbmk: | -DSPEC_CPU_LINUX |
Peak Optimization Flags
C benchmarks:
| 400.perlbench: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -Ofast -LNO:opt=0 |
| 401.bzip2: | -O3 -LNO:ou_prod_max=10 -OPT:Ofast -OPT:alias=disjoint |
| 403.gcc: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -m32 -O3 -OPT:Ofast |
| 429.mcf: | -m32 -O3 -ipa -L/opt/SmartHeap_8.1/lib -lsmartheap |
| 445.gobmk: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -O3 -OPT:alias=disjoint -LNO:simd=0 -LNO:minvariant=off -WOPT:retype_expr=on |
| 456.hmmer: | -O2 -OPT:alias=disjoint -OPT:malloc_alg=1 -CG:cflow=0 |
| 458.sjeng: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -O3 -IPA:plimit=50000 -IPA:pu_reorder=2 |
| 462.libquantum: | -O3 -ipa -CG:local_fwd_sched=on -IPA:space=1000 |
| 464.h264ref: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -O3 -IPA:plimit=20000 -OPT:alias=disjoint -LNO:prefetch=0 |
C++ benchmarks:
| 471.omnetpp: | -Ofast -CG:gcm=off -m32 -L/opt/SmartHeap_8.1/lib -lsmartheap |
| 473.astar: | basepeak = yes |
| 483.xalancbmk: | -Ofast -m32 -OPT:unroll_times_max=8 -L/opt/SmartHeap_8.1/lib -lsmartheap |