# Invocation command line:
# /spec/cpu2006/bin/runspec -c cpu2006_SLES10_EM64T_fp.cfg -F EM64T_Intel91_flags.xml -T all --reportable fp
# output_root was not used for this run
############################################################################
# Invocation command line:
# /cpu2006/bin/runspec -c cpu2006_SLES10_EM64T_fp.cfg -F EM64T_Intel91_flags.xml -T all --reportable fp
# output_root was not used for this run
############################################################################
############################################################################
# SPEC CPU2006 Intel Linux64 EM64T config file
# Mar 2007
# Intel Compiler 9.1 for Linux64 EM64T
############################################################################

action      = validate
tune        = base
ext         = cpu2006.v10.bull
PATHSEP     = /
output_format = all
check_md5=1
reportable=1
flagsurl000=http://www.spec.org/cpu2006/flags/EM64T_Intel91_flags.xml

#
# These are listed as benchmark-tuning-extension-machine
#
default=default=default=default:
CC  = icc
CXX = icpc
FC  = ifort
OBJ = .o

# use_submit_for_speed = 1
# submit= MYMASK=`printf '0x%x' \$((1<<\$SPECUSERNUM))`; /usr/bin/taskset \$MYMASK $command

################################################################
#
# portability & libraries
#

default:
PORTABILITY= -DSPEC_CPU_LP64

400.perlbench=default:
CPORTABILITY  = -DSPEC_CPU_LINUX_X64

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

435.gromacs=default:
LDPORTABILITY=     -nofor_main

436.cactusADM=default:
LDPORTABILITY=      -nofor_main

454.calculix=default:
LDPORTABILITY=     -nofor_main

462.libquantum=default:
CPORTABILITY= -DSPEC_CPU_LINUX

481.wrf=default:
CPORTABILITY=    -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

483.xalancbmk=default=default=default:
CXXPORTABILITY= -DSPEC_CPU_LINUX

# Tuning Flags
################################################################

#
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same 
# flags are used in the same order for all benchmarks of a given language

default=base=default=default:
OPTIMIZE= -fast

sw_base_ptrsize = 64-bit
sw_peak_ptrsize = Not Applicable

default=peak=default=default:
FOPTIMIZE   = -fast
COPTIMIZE   = -fast -auto_ilp32
CXXOPTIMIZE = -fast -auto_ilp32
sw_peak_ptrsize = 32/64-bit
PASS1_CFLAGS =   -prof_gen
PASS2_CFLAGS =   -prof_use
PASS1_FFLAGS =   -prof_gen
PASS2_FFLAGS =   -prof_use
PASS1_CXXFLAGS = -prof_gen
PASS2_CXXFLAGS = -prof_use
PASS1_LDFLAGS =  -prof_gen
PASS2_LDFLAGS =  -prof_use

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 20
test_sponsor     = Bull SAS
hw_avail         = Jun-2007
hw_cpu_char = 1.86 GHz, 4 MB L2, 1066 MHz system bus
sw_avail         = Dec-2006
test_date        = Jun-2007
tester           = Bull SAS
hw_cpu_name      = Intel Xeon 3040
hw_cpu_mhz       = 1860
hw_disk          = 1x80 GB SATA, 10000 RPM
hw_fpu           = Integrated
hw_memory        = 8 GB (4x2 GB) PC2-5300E ECC CL5
hw_model000      = NovaScale R410
hw_model001 = (Intel Xeon processor 3040,1.86GHz)
hw_ncpuorder     = 1 chip
hw_ncores        = 1
hw_nchips        = 1
hw_ncoresperchip = 2
hw_nthreadspercore = 1
hw_other         = None
sw_auto_parallel = No
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 2 MB I+D on chip per chip
hw_tcache        = None
hw_ocache        = None
hw_vendor        = Bull SAS
prepared_by      = Bull SAS
sw_file          = ext2
sw_os000         = SuSE Linux Enterprise Server 10 (EM64T)
sw_os001 = kernel 2.6.16.21-0.8-smp
sw_state         = Multi-user run level 3
sw_other         = None
notes_os_000     = Environment stack size set to 'unlimited'
notes_os_005     =
notes_os_010     = system was booted uniprocessor by setting "maxcpus=0"
notes_os_015     = kernel parameter in menu.lst


int=default=default=default:
sw_compiler001   = Intel C++ Compiler for Intel EM64T-based application, Version 9.1
sw_compiler002   = Package ID l_cc_c_9.1.045 Build no 20061101
sw_auto_parallel = No

fp=default=default=default:
sw_compiler000   = Intel C++ Compiler for Intel EM64T-based
sw_compiler001 = applications, Version 9.1
sw_compiler002   = Package ID l_cc_c_9.1.045 Build no 20061101
sw_compiler003   = Intel Fortran Compiler for Intel EM64T-based
sw_compiler004 = applications, Version 9.1
sw_compiler005   = Package ID l_fc_c_9.1.040 Build no 20061101
sw_auto_parallel = No




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl = http://www.spec.org/cpu2006/flags/flags.xml.20070206.xml