# Invocation command line:
# /home/cpu2006/bin/runspec -a validate -c x5355_rate.cfg -F config/NEC-ic91-linux-flags-20070522.xml -T all -o all -r 8 int
# output_root was not used for this run
############################################################################
######################################################
# SPEC CPU2006 Intel SLES10 x64 (64-bit) config file #
# Mar 27 2007 Intel Compiler 9.1 for Linux Intel64   #
######################################################

action      = validate
tune        = all
ext         = 120
PATHSEP     = /
check_md5   = 1
mean_anyway = 1
reportable  = 1


#######################################################################
# System information                                                  #
# If some remarks about BIOS or Firmware are needed, place them here. #
####################################################################### 

default=default=default=default:
notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
notes_os_005= '/usr/bin/taskset' used to bind processes to CPUs
notes_000=
notes_005= The system bus runs at 1333 MHz

int=default=default=default:
notes_025=
notes_030= The Express5800/120Rg-1 and the Express5800/120Ri-2 models are
notes_035= electronically equivalent.
notes_040 = The results have been measured on a Express5800/120Ri-2 model.

fp=default=default=default:
notes_010= All binaries were built with 64-bit Intel compiler except:
notes_015= 433.milc, 434.zeusmp, 450.soplex, 470.lbm and 482.sphinx3 in peak were built with
notes_020= 32-bit Intel compiler by changing the path for include and library files.

#####################################
# Description Hardware and Software #
#####################################

default=default=default=default:
hw_vendor          = NEC Corporation
hw_model000        = Express5800/120Rg-1
hw_model001        = (Intel Xeon processor X5355)
hw_cpu_name        = Intel Xeon X5355
hw_cpu_char        = 2.66 GHz, 2x4 MB L2 shared, 1333 MHz bus
hw_cpu_mhz         = 2666
hw_fpu             = Integrated
hw_nchips          = 2
hw_ncores          = 8
hw_ncoresperchip   = 4
hw_nthreadspercore = 1
hw_ncpuorder       = 1,2 chips
hw_pcache          = 32 KB I + 32 KB D on chip per core
hw_scache          = 8 MB I+D on chip per chip, 4 MB shared / 2 cores
hw_tcache          = None
hw_ocache          = None
hw_memory          = 16 GB (8x2 GB DDR2 5300F, 2 rank, CL5-5-5, ECC)
hw_disk            = 1x73.2 GB SAS, 15000RPM
hw_other           = None
sw_file            = ext2
sw_state           = Multiuser, Runlevel 3
license_num        = 9006
test_sponsor       = NEC Corporation
tester             = NEC Corporation
test_date          = Jun-2007
hw_avail           = Jan-2007
prepared_by        = NEC Corporation

notes_010= All binaries were built with 32-bit Intel compiler except:
notes_015= 401.bzip2, 456.hmmer and 462.libquantum in peak were built with
notes_020= 64-bit Intel compiler by changing the path for include and library files.

default=default=default=default:
CC  = icc
CXX = icpc
FC  = ifort
OBJ = .o

SMARTHEAP_DIR = /opt/SmartHeap_8.1/lib

submit= MYMASK=`printf '0x%x' \$((1<<\$SPECCOPYNUM))`; /usr/bin/taskset \$MYMASK $command

###########################
# portability & libraries #
###########################

fp=default=default=default:
PORTABILITY = -DSPEC_CPU_LP64

400.perlbench=default=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX_X64

462.libquantum=default=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX

483.xalancbmk=default=default=default:
CXXPORTABILITY = -DSPEC_CPU_LINUX

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

#########################
# Baseline Tuning Flags #
#########################

int=base=default=default:
COPTIMIZE= -fast
CXXOPTIMIZE= -xP -O3 -ipo -no-prec-div
EXTRA_CXXLIBS= -L$(SMARTHEAP_DIR) -lsmartheap

fp=base=default=default:
OPTIMIZE= -fast

#####################
# Peak Tuning Flags #
#####################

int=peak=default=default:
OPTIMIZE= -fast
EXTRA_LIBS= -L$(SMARTHEAP_DIR) -lsmartheap

PASS1_CFLAGS   = -prof_gen
PASS2_CFLAGS   = -prof_use
PASS1_CXXFLAGS = -prof_gen
PASS2_CXXFLAGS = -prof_use
PASS1_LDFLAGS  = -prof_gen
PASS2_LDFLAGS  = -prof_use

fp=peak=default=default:
OPTIMIZE= -fast

PASS1_CFLAGS   = -prof_gen
PASS2_CFLAGS   = -prof_use
PASS1_FFLAGS   = -prof_gen
PASS2_FFLAGS   = -prof_use
PASS1_CXXFLAGS = -prof_gen
PASS2_CXXFLAGS = -prof_use
PASS1_LDFLAGS  = -prof_gen
PASS2_LDFLAGS  = -prof_use

400.perlbench=peak=default=default:
EXTRA_LIBS= 

401.bzip2=peak=default=default:
CC=/opt/intel/cce/9.1.049/bin/icc -I/opt/intel/cce/9.1.049/include -L/opt/intel/cce/9.1.049/lib
PORTABILITY=-DSPEC_CPU_LP64
EXTRA_LIBS= 
feedback=0

403.gcc=peak=default=default:
basepeak=yes

456.hmmer=peak=default=default:
CC=/opt/intel/cce/9.1.049/bin/icc -I/opt/intel/cce/9.1.049/include -L/opt/intel/cce/9.1.049/lib
PORTABILITY=-DSPEC_CPU_LP64
EXTRA_LIBS= 

462.libquantum=peak=default=default:
CC=/opt/intel/cce/9.1.049/bin/icc -I/opt/intel/cce/9.1.049/include -L/opt/intel/cce/9.1.049/lib
PORTABILITY=-DSPEC_CPU_LP64
EXTRA_LIBS= 

471.omnetpp=peak=default=default:
OPTIMIZE=-xP -O3 -ipo -no-prec-div

483.xalancbmk=peak=default=default:
basepeak=yes

410.bwaves=peak=default=default:
basepeak=yes

416.gamess=peak=default=default:
basepeak=yes

433.milc=peak=default=default:
PORTABILITY= 
CC=/opt/intel/cc/9.1.049/bin/icc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib

434.zeusmp=peak=default=default:
PORTABILITY= 
FC=/opt/intel/fc/9.1.045/bin/ifort -I/opt/intel/fc/9.1.045/include -L/opt/intel/fc/9.1.045/lib
feedback=0

436.cactusADM=peak=default=default:
basepeak=yes

437.leslie3d=peak=default=default:
basepeak=yes

444.namd=peak=default=default:
basepeak=yes

450.soplex=peak=default=default:
PORTABILITY= 
CXX=/opt/intel/cc/9.1.049/bin/icpc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib

459.GemsFDTD=peak=default=default:
basepeak=yes

470.lbm=peak=default=default:
PORTABILITY= 
CC=/opt/intel/cc/9.1.049/bin/icc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib

481.wrf=peak=default=default:
basepeak=yes

482.sphinx3=peak=default=default:
PORTABILITY= 
CC=/opt/intel/cc/9.1.049/bin/icc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib
feedback=0

#########################
# Used Compilers and OS #
#########################

int=default=default=default:
sw_compiler000   = Intel C++ Compiler for IA32/EM64T application,
sw_compiler001   = Version 9.1 - Build 20070320, Package-ID:
sw_compiler002 = l_cc_c_9.1.049
sw_other         = MicroQuill SmartHeap Library 8.1
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit

fp=default=default=default:
sw_compiler000   = Intel C++ Compiler for IA32/EM64T application,
sw_compiler001   = Version 9.1 - Build 20070320, Package-ID:
sw_compiler002   = l_cc_c_9.1.049
sw_compiler003   = Intel Fortran Compiler for IA32/EM64T application,
sw_compiler004   = Version 9.1 - Build 20070320, Package ID:
sw_compiler005   = l_fc_c_9.1.045
sw_other         = None
sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 32/64-bit

default=default=default=default:
sw_os000         = 64-Bit SUSE LINUX Enterprise Server 10, Kernel
sw_os001         = 2.6.16.21-0.8-smp on an x86_64
sw_avail         = Apr-2007
sw_auto_parallel = No






# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000= http://www.spec.org/cpu2006/flags/NEC-ic91-linux-flags.20090714.xml