# Invocation command line: # /local/home/colgrove/SPECACCEL/bin/runspec -c pgi_omp --reportable -T base openacc # output_root was not used for this run ############################################################################ # Invocation command line: # /local/home/SPECACCEL/bin/runspec -c tesla-pgi142 --reportable -T base,peak -i test,train,ref openacc # output_root was not used for this run ############################################################################ #################################################################### # Tester information #################################################################### # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 license_num = 019 #prepared_by = Mathew Colgrove (mathew.colgrove@pgroup.com) tester = NVIDIA Corporation test_sponsor = NVIDIA Corporation ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" ext = pgi output_format = asc teeout = yes teerunout = yes tune = base preENV_HUGETLB_PATH=/mnt/hugetlb preENV_ACC_NUM_CORES=48 preENV_KMP_ALL_THREADS=48 preENV_OMP_THREAD_LIMIT=48 preENV_OMP_PROC_BIND=true #preENV_OMP_PLACES={0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79},{80},{81},{82},{83},{84},{85},{86},{87},{88},{89},{90},{91},{92},{93},{94},{95} preENV_OMP_PLACES={0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47} #preENV_KMP_AFFINITY=granularity=fine,compact,1,0 submit = numactl --interleave all $command #################################################################### # HOST Hardware information #################################################################### default=default=default=default: hw_avail = Dec-2013 #hw_cpu_name = Intel Core i7-3930K hw_cpu_mhz = 3200 hw_cpu_max_mhz = 3800 hw_fpu = Integrated #hw_nchips = 1 hw_ncores = 6 hw_ncoresperchip = 6 hw_nthreadspercore = 2 hw_ncpuorder = 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 12 MB I+D on chip per chip hw_ocache = None hw_vendor = ASUS hw_model = ASUS P9X79 Motherboard sw_parallel_other = No #hw_disk = 99x SCSI, 999 GB, 999 RPM hw_memory000 = 8 GB (2 x 4 GB, PC3-14900R-9, running at 1600 MHz) hw_other = None #################################################################### # Accelerator Hardware information #################################################################### hw_accel_model = Epyc hw_accel_vendor = AMD hw_accel_name = Epyc hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = Yes #################################################################### # Power and temperature meter configuration #################################################################### power = no power_analyzer = 10.20.101.194:8888 temp_meter = 10.20.101.194:8889 mean_anyway = 1 voltage_range = auto idle_current_range = auto current_range = auto #################################################################### # Software information #################################################################### default=default=default=default: sw_avail = Jul-2018 sw_compiler = PGI Accelerator Fortran/C/C++ Server, Release 18.7 CC = pgcc CXX = pgc++ FC = pgfortran openacc=default=default=default: hw_psu = 1200 W hw_psu_info = Thermaltake SMART M1200W opencl=default=default=default: sw_other = CUDA 9.1 SDK openmp=base=default=default: PORTABILITY = -DSPEC_USE_INNER_SIMD OPTIMIZE = -fast -Mnouniform -Mhugetlb -mp -V18.7 -Mllvm FOPTIMIZE = COPTIMIZE = openacc=base=default=default: OPTIMIZE = -fast -Mnouniform -Mhugetlb -V18.7 -Mllvm FOPTIMIZE = -acc -ta=multicore COPTIMIZE = -acc -ta=multicore opencl=default=default=default: CPORTABILITY = -I/opt/cuda-9.1/include/ -lOpenCL CXXPORTABILITY = -I/opt/cuda-9.1/include/ -lOpenCL opencl=base=default=default: OPTIMIZE = -fast -Mfprelaxed 118.cutcp=default=default=default: CPORTABILITY += -D__GNUC__ 359.miniGhost,559.pmniGhost=default=default=default: EXTRA_LDFLAGS += -Mnomain 551.ppalm: srcalt=advec_ws_private # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on epyc.pgi.net Mon Aug 13 13:19:35 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7451 24-Core Processor notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 96 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 24 notes_plat_sysinfo_080 = siblings : 48 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_090 = 28 29 30 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_100 = 28 29 30 notes_plat_sysinfo_105 = cache size : 512 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 264029300 kB notes_plat_sysinfo_125 = HugePages_Total: 20 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = /usr/bin/lsb_release -d notes_plat_sysinfo_145 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /etc/*release* /etc/*version* notes_plat_sysinfo_160 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_165 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_170 = hpe-mpi-release: HPE MPI 1.1, Build 717r22.rhel74-1711292100 notes_plat_sysinfo_175 = os-release: notes_plat_sysinfo_180 = NAME="CentOS Linux" notes_plat_sysinfo_185 = VERSION="7 (Core)" notes_plat_sysinfo_190 = ID="centos" notes_plat_sysinfo_195 = ID_LIKE="rhel fedora" notes_plat_sysinfo_200 = VERSION_ID="7" notes_plat_sysinfo_205 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_210 = ANSI_COLOR="0;31" notes_plat_sysinfo_215 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_220 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_225 = sgi-release: SGI Performance Suite 1.15 notes_plat_sysinfo_230 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_235 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = uname -a: notes_plat_sysinfo_250 = Linux epyc.pgi.net 4.15.0-1.el7.elrepo.x86_64 #1 SMP Sun Jan 28 20:45:20 EST notes_plat_sysinfo_255 = 2018 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = run-level 3 Aug 1 13:00 notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_280 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_285 = /dev/mapper/centos-root xfs 443G 161G 282G 37% / notes_plat_sysinfo_290 = Additional information from dmidecode: notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_305 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_310 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_315 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = (End of data from sysinfo program) hw_cpu_name = AMD EPYC 7451 24-Core hw_disk = 443 GB add more disk info here hw_memory001 = 251.798 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = 2 prepared_by = colgrove (is never output, only tags rawfile) sw_file = xfs sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 4.15.0-1.el7.elrepo.x86_64 sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "48" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_ALL_THREADS = "48" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47}" notes_025 =OMP_PROC_BIND = "true" notes_030 =OMP_THREAD_LIMIT = "48" notes_035 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: hw_cpu_name = AMD EPYC 7451 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 2900 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_disk = 1 x 480 GB Intel SATA SSD (SSDSC2BB48) hw_other = None hw_accel_model = Epyc 7451 hw_accel_vendor = AMD hw_accel_name = Epyc 7451 hw_accel_type = CPU hw_accel_connect = Not Applicable hw_accel_ecc = Yes hw_accel_desc = AMD Epyc 48-core CPU sw_accel_driver = Not Applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Aug-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = A+ Server 1023US-TR4 sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 24 hw_ncores = 48 hw_nchips = 2 hw_memory000 = 256 GB (16 x 16GB PC4-21300 2666MHz DDR4) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 4.15.0-1.el7.elrepo.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on epyc.pgi.net Mon Aug 13 13:19:35 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7451 24-Core Processor notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 96 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 24 notes_plat_sysinfo_080 = siblings : 48 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_090 = 28 29 30 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_100 = 28 29 30 notes_plat_sysinfo_105 = cache size : 512 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 264029300 kB notes_plat_sysinfo_125 = HugePages_Total: 20 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = /usr/bin/lsb_release -d notes_plat_sysinfo_145 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /etc/*release* /etc/*version* notes_plat_sysinfo_160 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_165 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_170 = hpe-mpi-release: HPE MPI 1.1, Build 717r22.rhel74-1711292100 notes_plat_sysinfo_175 = os-release: notes_plat_sysinfo_180 = NAME="CentOS Linux" notes_plat_sysinfo_185 = VERSION="7 (Core)" notes_plat_sysinfo_190 = ID="centos" notes_plat_sysinfo_195 = ID_LIKE="rhel fedora" notes_plat_sysinfo_200 = VERSION_ID="7" notes_plat_sysinfo_205 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_210 = ANSI_COLOR="0;31" notes_plat_sysinfo_215 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_220 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_225 = sgi-release: SGI Performance Suite 1.15 notes_plat_sysinfo_230 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_235 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = uname -a: notes_plat_sysinfo_250 = Linux epyc.pgi.net 4.15.0-1.el7.elrepo.x86_64 #1 SMP Sun Jan 28 20:45:20 EST notes_plat_sysinfo_255 = 2018 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = run-level 3 Aug 1 13:00 notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_280 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_285 = /dev/mapper/centos-root xfs 443G 161G 282G 37% / notes_plat_sysinfo_290 = Additional information from dmidecode: notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_305 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_310 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_315 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "48" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_ALL_THREADS = "48" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19}, notes_025 = {20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39}, notes_030 = {40},{41},{42},{43},{44},{45},{46},{47}" notes_035 =OMP_PROC_BIND = "true" notes_040 =OMP_THREAD_LIMIT = "48" notes_045 = notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_055 =is mitigated in the system as tested and documented. notes_060 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_065 =is mitigated in the system as tested and documented. notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_075 =is mitigated in the system as tested and documented. # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: hw_cpu_name = AMD EPYC 7451 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 2900 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_disk = 1 x 480 GB Intel SATA SSD (SSDSC2BB48) hw_other = None hw_accel_model = Epyc 7451 hw_accel_vendor = AMD hw_accel_name = Epyc 7451 hw_accel_type = CPU hw_accel_connect = Not Applicable hw_accel_ecc = Yes hw_accel_desc = AMD Epyc 48-core CPU sw_accel_driver = Not Applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Aug-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = A+ Server 1023US-TR4 sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 24 hw_ncores = 48 hw_nchips = 2 hw_memory000 = 256 GB (16 x 16GB PC4-21300 2666MHz DDR4) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 4.15.0-1.el7.elrepo.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on epyc.pgi.net Mon Aug 13 13:19:35 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7451 24-Core Processor notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 96 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 24 notes_plat_sysinfo_080 = siblings : 48 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_090 = 28 29 30 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_100 = 28 29 30 notes_plat_sysinfo_105 = cache size : 512 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 264029300 kB notes_plat_sysinfo_125 = HugePages_Total: 20 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = /usr/bin/lsb_release -d notes_plat_sysinfo_145 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /etc/*release* /etc/*version* notes_plat_sysinfo_160 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_165 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_170 = hpe-mpi-release: HPE MPI 1.1, Build 717r22.rhel74-1711292100 notes_plat_sysinfo_175 = os-release: notes_plat_sysinfo_180 = NAME="CentOS Linux" notes_plat_sysinfo_185 = VERSION="7 (Core)" notes_plat_sysinfo_190 = ID="centos" notes_plat_sysinfo_195 = ID_LIKE="rhel fedora" notes_plat_sysinfo_200 = VERSION_ID="7" notes_plat_sysinfo_205 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_210 = ANSI_COLOR="0;31" notes_plat_sysinfo_215 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_220 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_225 = sgi-release: SGI Performance Suite 1.15 notes_plat_sysinfo_230 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_235 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = uname -a: notes_plat_sysinfo_250 = Linux epyc.pgi.net 4.15.0-1.el7.elrepo.x86_64 #1 SMP Sun Jan 28 20:45:20 EST notes_plat_sysinfo_255 = 2018 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = run-level 3 Aug 1 13:00 notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_280 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_285 = /dev/mapper/centos-root xfs 443G 161G 282G 37% / notes_plat_sysinfo_290 = Additional information from dmidecode: notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_305 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_310 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_315 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "48" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_ALL_THREADS = "48" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19}, notes_025 = {20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39}, notes_030 = {40},{41},{42},{43},{44},{45},{46},{47}" notes_035 =OMP_PROC_BIND = "true" notes_040 =OMP_THREAD_LIMIT = "48" notes_045 = notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_055 =is mitigated in the system as tested and documented. notes_060 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_065 =is mitigated in the system as tested and documented. notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_075 =is mitigated in the system as tested and documented. # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml hw_cpu_name = AMD EPYC 7451 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 2900 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_disk = 1 x 480 GB Intel SATA SSD (SSDSC2BB48) hw_other = None hw_accel_model = Epyc 7451 hw_accel_vendor = AMD hw_accel_name = Epyc 7451 hw_accel_type = CPU hw_accel_connect = Not Applicable hw_accel_ecc = Yes hw_accel_desc = AMD Epyc 48-core CPU sw_accel_driver = Not Applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Aug-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = A+ Server 1023US-TR4 sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 24 hw_ncores = 48 hw_nchips = 2 hw_memory000 = 256 GB (16 x 16GB PC4-21300 2666MHz DDR4) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 4.15.0-1.el7.elrepo.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on epyc.pgi.net Mon Aug 13 13:19:35 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7451 24-Core Processor notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 96 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 24 notes_plat_sysinfo_080 = siblings : 48 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_090 = 28 29 30 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_100 = 28 29 30 notes_plat_sysinfo_105 = cache size : 512 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 264029300 kB notes_plat_sysinfo_125 = HugePages_Total: 20 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = /usr/bin/lsb_release -d notes_plat_sysinfo_145 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /etc/*release* /etc/*version* notes_plat_sysinfo_160 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_165 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_170 = hpe-mpi-release: HPE MPI 1.1, Build 717r22.rhel74-1711292100 notes_plat_sysinfo_175 = os-release: notes_plat_sysinfo_180 = NAME="CentOS Linux" notes_plat_sysinfo_185 = VERSION="7 (Core)" notes_plat_sysinfo_190 = ID="centos" notes_plat_sysinfo_195 = ID_LIKE="rhel fedora" notes_plat_sysinfo_200 = VERSION_ID="7" notes_plat_sysinfo_205 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_210 = ANSI_COLOR="0;31" notes_plat_sysinfo_215 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_220 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_225 = sgi-release: SGI Performance Suite 1.15 notes_plat_sysinfo_230 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_235 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = uname -a: notes_plat_sysinfo_250 = Linux epyc.pgi.net 4.15.0-1.el7.elrepo.x86_64 #1 SMP Sun Jan 28 20:45:20 EST notes_plat_sysinfo_255 = 2018 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = run-level 3 Aug 1 13:00 notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_280 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_285 = /dev/mapper/centos-root xfs 443G 161G 282G 37% / notes_plat_sysinfo_290 = Additional information from dmidecode: notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_305 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_310 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_315 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "48" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_ALL_THREADS = "48" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19}, notes_025 = {20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39}, notes_030 = {40},{41},{42},{43},{44},{45},{46},{47}" notes_035 =OMP_PROC_BIND = "true" notes_040 =OMP_THREAD_LIMIT = "48" notes_045 = notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_055 =is mitigated in the system as tested and documented. notes_060 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_065 =is mitigated in the system as tested and documented. notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_075 =is mitigated in the system as tested and documented. # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml hw_cpu_name = AMD EPYC 7451 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 2900 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_disk = 1 x 480 GB Intel SATA SSD (SSDSC2BB48) hw_other = None hw_accel_model = Epyc 7451 hw_accel_vendor = AMD hw_accel_name = Epyc 7451 hw_accel_type = CPU hw_accel_connect = Not Applicable hw_accel_ecc = Yes hw_accel_desc = AMD Epyc 48-core CPU sw_accel_driver = Not Applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Aug-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = A+ Server 1023US-TR4 sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 24 hw_ncores = 48 hw_nchips = 2 hw_memory000 = 256 GB (16 x 16GB PC4-21300 2666MHz DDR4) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 4.15.0-1.el7.elrepo.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on epyc.pgi.net Mon Aug 13 13:19:35 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7451 24-Core Processor notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 96 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 24 notes_plat_sysinfo_080 = siblings : 48 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_090 = 28 29 30 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_100 = 28 29 30 notes_plat_sysinfo_105 = cache size : 512 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 264029300 kB notes_plat_sysinfo_125 = HugePages_Total: 20 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = /usr/bin/lsb_release -d notes_plat_sysinfo_145 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /etc/*release* /etc/*version* notes_plat_sysinfo_160 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_165 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_170 = hpe-mpi-release: HPE MPI 1.1, Build 717r22.rhel74-1711292100 notes_plat_sysinfo_175 = os-release: notes_plat_sysinfo_180 = NAME="CentOS Linux" notes_plat_sysinfo_185 = VERSION="7 (Core)" notes_plat_sysinfo_190 = ID="centos" notes_plat_sysinfo_195 = ID_LIKE="rhel fedora" notes_plat_sysinfo_200 = VERSION_ID="7" notes_plat_sysinfo_205 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_210 = ANSI_COLOR="0;31" notes_plat_sysinfo_215 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_220 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_225 = sgi-release: SGI Performance Suite 1.15 notes_plat_sysinfo_230 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_235 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = uname -a: notes_plat_sysinfo_250 = Linux epyc.pgi.net 4.15.0-1.el7.elrepo.x86_64 #1 SMP Sun Jan 28 20:45:20 EST notes_plat_sysinfo_255 = 2018 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = run-level 3 Aug 1 13:00 notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_280 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_285 = /dev/mapper/centos-root xfs 443G 161G 282G 37% / notes_plat_sysinfo_290 = Additional information from dmidecode: notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_305 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_310 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_315 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "48" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_ALL_THREADS = "48" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19}, notes_025 = {20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39}, notes_030 = {40},{41},{42},{43},{44},{45},{46},{47}" notes_035 =OMP_PROC_BIND = "true" notes_040 =OMP_THREAD_LIMIT = "48" notes_045 = notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_055 =is mitigated in the system as tested and documented. notes_060 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_065 =is mitigated in the system as tested and documented. notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_075 =is mitigated in the system as tested and documented. # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml hw_cpu_name = AMD EPYC 7451 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 2900 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_disk = 1 x 480 GB Intel SATA SSD (SSDSC2BB48) hw_other = None hw_accel_model = Epyc 7451 hw_accel_vendor = AMD hw_accel_name = Epyc 7451 hw_accel_type = CPU hw_accel_connect = Not Applicable hw_accel_ecc = Yes hw_accel_desc = AMD Epyc 48-core CPU sw_accel_driver = Not Applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Aug-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = A+ Server 1023US-TR4 sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 24 hw_ncores = 48 hw_nchips = 2 hw_memory000 = 256 GB (16 x 16GB PC4-21300 2666MHz DDR4) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 4.15.0-1.el7.elrepo.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on epyc.pgi.net Mon Aug 13 13:19:35 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7451 24-Core Processor notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 96 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 24 notes_plat_sysinfo_080 = siblings : 48 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_090 = 28 29 30 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_100 = 28 29 30 notes_plat_sysinfo_105 = cache size : 512 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 264029300 kB notes_plat_sysinfo_125 = HugePages_Total: 20 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = /usr/bin/lsb_release -d notes_plat_sysinfo_145 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /etc/*release* /etc/*version* notes_plat_sysinfo_160 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_165 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_170 = hpe-mpi-release: HPE MPI 1.1, Build 717r22.rhel74-1711292100 notes_plat_sysinfo_175 = os-release: notes_plat_sysinfo_180 = NAME="CentOS Linux" notes_plat_sysinfo_185 = VERSION="7 (Core)" notes_plat_sysinfo_190 = ID="centos" notes_plat_sysinfo_195 = ID_LIKE="rhel fedora" notes_plat_sysinfo_200 = VERSION_ID="7" notes_plat_sysinfo_205 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_210 = ANSI_COLOR="0;31" notes_plat_sysinfo_215 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_220 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_225 = sgi-release: SGI Performance Suite 1.15 notes_plat_sysinfo_230 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_235 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = uname -a: notes_plat_sysinfo_250 = Linux epyc.pgi.net 4.15.0-1.el7.elrepo.x86_64 #1 SMP Sun Jan 28 20:45:20 EST notes_plat_sysinfo_255 = 2018 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = run-level 3 Aug 1 13:00 notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_280 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_285 = /dev/mapper/centos-root xfs 443G 161G 282G 37% / notes_plat_sysinfo_290 = Additional information from dmidecode: notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_305 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_310 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_315 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "48" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_ALL_THREADS = "48" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19}, notes_025 = {20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39}, notes_030 = {40},{41},{42},{43},{44},{45},{46},{47}" notes_035 =OMP_PROC_BIND = "true" notes_040 =OMP_THREAD_LIMIT = "48" notes_045 = notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_055 =is mitigated in the system as tested and documented. notes_060 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_065 =is mitigated in the system as tested and documented. notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_075 =is mitigated in the system as tested and documented. # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /proj/apps/SPECHPG/SPECACCEL/flags/pgi2018_platform.xml flagsurl001 = /proj/apps/SPECHPG/SPECACCEL/flags/pgi2018_flags.xml hw_cpu_name = AMD EPYC 7451 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 64 KB I + 32 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 64 MB I+D on chip per chip, 8 MB shared / 3 cores hw_ocache = None hw_disk = 1 x 480 GB Intel SATA SSD (SSDSC2BB48) hw_other = None hw_accel_model = EPYC 7451 hw_accel_vendor = AMD hw_accel_name = EPYC 7451 hw_accel_type = CPU hw_accel_connect = Not Applicable hw_accel_ecc = Yes hw_accel_desc = AMD EPYC 48-core CPU sw_accel_driver = Not Applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Aug-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = A+ Server 1023US-TR4 sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 24 hw_ncores = 48 hw_nchips = 2 hw_memory000 = 256 GB (16 x 16GB 4DRx4 PC4-2666V-L, running at hw_memory001 = 2667) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 4.15.0-1.el7.elrepo.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on epyc.pgi.net Mon Aug 13 13:19:35 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7451 24-Core Processor notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 96 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 24 notes_plat_sysinfo_080 = siblings : 48 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_090 = 28 29 30 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_100 = 28 29 30 notes_plat_sysinfo_105 = cache size : 512 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 264029300 kB notes_plat_sysinfo_125 = HugePages_Total: 20 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = /usr/bin/lsb_release -d notes_plat_sysinfo_145 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /etc/*release* /etc/*version* notes_plat_sysinfo_160 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_165 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_170 = hpe-mpi-release: HPE MPI 1.1, Build 717r22.rhel74-1711292100 notes_plat_sysinfo_175 = os-release: notes_plat_sysinfo_180 = NAME="CentOS Linux" notes_plat_sysinfo_185 = VERSION="7 (Core)" notes_plat_sysinfo_190 = ID="centos" notes_plat_sysinfo_195 = ID_LIKE="rhel fedora" notes_plat_sysinfo_200 = VERSION_ID="7" notes_plat_sysinfo_205 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_210 = ANSI_COLOR="0;31" notes_plat_sysinfo_215 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_220 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_225 = sgi-release: SGI Performance Suite 1.15 notes_plat_sysinfo_230 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_235 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = uname -a: notes_plat_sysinfo_250 = Linux epyc.pgi.net 4.15.0-1.el7.elrepo.x86_64 #1 SMP Sun Jan 28 20:45:20 EST notes_plat_sysinfo_255 = 2018 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = run-level 3 Aug 1 13:00 notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_280 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_285 = /dev/mapper/centos-root xfs 443G 161G 282G 37% / notes_plat_sysinfo_290 = Additional information from dmidecode: notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_305 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_310 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_315 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = (End of data from sysinfo program) notes_submit_000 =Submit command: numactl --interleave all $command notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "48" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_ALL_THREADS = "48" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19}, notes_025 = {20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39}, notes_030 = {40},{41},{42},{43},{44},{45},{46},{47}" notes_035 =OMP_PROC_BIND = "true" notes_040 =OMP_THREAD_LIMIT = "48" notes_045 = notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_055 =is mitigated in the system as tested and documented. notes_060 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_065 =is mitigated in the system as tested and documented. notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_075 =is mitigated in the system as tested and documented. # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = https://www.spec.org/accel/flags/PGI-Platform-Multicore-OMP.xml flagsurl001 = https://www.spec.org/accel/flags/pgi2018_flags.xml hw_cpu_name = AMD EPYC 7451 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 64 KB I + 32 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 64 MB I+D on chip per chip, 8 MB shared / 3 cores hw_ocache = None hw_disk = 1 x 480 GB Intel SATA SSD (SSDSC2BB48) hw_other = None hw_accel_model = EPYC 7451 hw_accel_vendor = AMD hw_accel_name = EPYC 7451 hw_accel_type = CPU hw_accel_connect = Not Applicable hw_accel_ecc = Yes hw_accel_desc = AMD EPYC 48-core CPU sw_accel_driver = Not Applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Aug-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = A+ Server 1023US-TR4 sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 24 hw_ncores = 48 hw_nchips = 2 hw_memory000 = 256 GB (16 x 16GB 4DRx4 PC4-2666V-L, running at hw_memory001 = 2667) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 4.15.0-1.el7.elrepo.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on epyc.pgi.net Mon Aug 13 13:19:35 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7451 24-Core Processor notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 96 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 24 notes_plat_sysinfo_080 = siblings : 48 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_090 = 28 29 30 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 notes_plat_sysinfo_100 = 28 29 30 notes_plat_sysinfo_105 = cache size : 512 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 264029300 kB notes_plat_sysinfo_125 = HugePages_Total: 20 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = /usr/bin/lsb_release -d notes_plat_sysinfo_145 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /etc/*release* /etc/*version* notes_plat_sysinfo_160 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_165 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_170 = hpe-mpi-release: HPE MPI 1.1, Build 717r22.rhel74-1711292100 notes_plat_sysinfo_175 = os-release: notes_plat_sysinfo_180 = NAME="CentOS Linux" notes_plat_sysinfo_185 = VERSION="7 (Core)" notes_plat_sysinfo_190 = ID="centos" notes_plat_sysinfo_195 = ID_LIKE="rhel fedora" notes_plat_sysinfo_200 = VERSION_ID="7" notes_plat_sysinfo_205 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_210 = ANSI_COLOR="0;31" notes_plat_sysinfo_215 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_220 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_225 = sgi-release: SGI Performance Suite 1.15 notes_plat_sysinfo_230 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_235 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = uname -a: notes_plat_sysinfo_250 = Linux epyc.pgi.net 4.15.0-1.el7.elrepo.x86_64 #1 SMP Sun Jan 28 20:45:20 EST notes_plat_sysinfo_255 = 2018 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = run-level 3 Aug 1 13:00 notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_280 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_285 = /dev/mapper/centos-root xfs 443G 161G 282G 37% / notes_plat_sysinfo_290 = Additional information from dmidecode: notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_305 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_310 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_315 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = (End of data from sysinfo program) notes_submit_000 =Submit command: numactl --interleave all $command notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "48" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_ALL_THREADS = "48" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19}, notes_025 = {20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39}, notes_030 = {40},{41},{42},{43},{44},{45},{46},{47}" notes_035 =OMP_PROC_BIND = "true" notes_040 =OMP_THREAD_LIMIT = "48" notes_045 = notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_055 =is mitigated in the system as tested and documented. notes_060 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_065 =is mitigated in the system as tested and documented. notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_075 =is mitigated in the system as tested and documented.